Skrui ni akɛwoɔ tsũ yiteŋ yɛŋ

Eyɛŋ ni akɛgbeɔ naa lɛ kɛ ŋwɛi ŋtayaai ni kpɛɔ lɛ futuɔ.

Seal ni wa tsiɔ kponɔgbɛ tsũ yiteŋ nu ni hoɔ lɛ fɛɛ naa.

Factory coated kɛha sɛɛfimɔ ni sɛɛ tsɛɔ ni sɛɛ efooo.

Sinsun nitsumɔhe tɛ̃ɛ: Premium Eyɛŋ Skru kɛha Dade Tsuji Ahe Hetsemɔ

Ani ootao tsũ yiteŋ skrui yɛŋ kɛjɛ nifeelɔ ko ni anyɛɔ akɛ he fɔ̃ɔ enɔ lɛ dɛŋ? Sinsun kɛ tsɔnei ni hi jogbaŋŋ ni kɛ amɛhe kpãa gbee ni akɛ EPDM washers kɛ Class 4/Ruspert tsɔnei ni akɛwoɔ mli lɛ haa. Kwɛmɔ dalɛ chart lɛ ni ona jara babaoo.

Na Quote Oya

Ale wɔ ŋwɛi ŋtayaai yɛŋ ni tsuɔ nii jogbaŋŋ lɛ hu akɛ ŋtayaai ni akɛ kɔla ekpɛ, dade diŋ ni akɛwoɔ ŋtayaai amli kɛ ŋtayaai yɛŋ ni kɛ kɔla kpãa gbee. Akɛ polyester diŋ ni hi jogbaŋŋ ehà kponɔgbɛ nibii ni akɛfiɔ he nɛɛ ahe. Afee amɛ pɔtɛɛ aha dade diŋ kɛ ŋmɔlɔŋmɔlɔ ni akɛwoɔ tsũ yiteŋ, downspouts, fascia boards kɛ kponɔgbɛ gbogbo he tsɔne. Amɛtsuɔ naagbai enyɔ ni bei pii lɛ akɛkpeɔ yɛ tsũ yiteŋ tsumaa mli lɛ ahe nii: amɛjieɔ shika tsuru ni akɛfiɔ tsũ yiteŋ kɛ tsũ yiteŋ yɛŋ krɔŋŋ lɛ he gbeekpamɔ ni anaa lɛ, ni amɛtsiɔ tsũ yiteŋ ŋtayaai ni afɔɔ namɔ kɛ ŋtayaai diji ni ehiii lɛ anaa yɛ be kukuoo mli.

Sinsun ŋwɛi ŋtayaai yɛŋ lɛ ji nɔ ni yɔɔ srɔto kwraa yɛ jara nɔ. Amɛtsɔɔ bɔ ni afee nibii ni akɛwoɔ mli lɛ tamɔ nɔ ni afeɔ yɛ nitsumɔhe lɛ, ni afee amɛ jogbaŋŋ. Nibii nɛɛ haa amɛhi fe tsɔnei ni akɛwoɔ tsũ yiteŋ daa lɛ. Wɔkɛ electrostatic powder ni mli wa tsuɔ nii moŋ fe pɛnte ni jara waaa ni akɛshwieɔ nɔ lɛ koni wɔkɛha su ni he tse, ni yɔɔ ekome ni nɔ ko nɔ ko bɛ ni jeɔ kpo kɛjɛɔ ŋwɛitsu lɛ nɔ su yɛŋ lɛ he. thread slippage loo panel fitemɔ yɛ be mli ni akɛwoɔ mli lɛ, akɛ la tsuɔ dade gbɔmɔtso lɛ eko fɛɛ eko he nii, ni akaa nibii fɛɛ ni akɛmajeɔ lɛ akwɛɔ waa koni ana bɔ ni ehiɛ su yɔɔ ha, bɔ ni enyɛŋ efite, kɛ bɔ ni tsɔne lɛ mli wa ha.

Na Quote Oya

Sinsun White Skrui ni Akɛwoɔ Tsu He lɛ He Saji

Diamita	Kɛlɛ He	TEK / Nɔ ni yɔɔ mli	Yitso Style	Washer Diamita	Nɔ ni akɛhaa nɔ	Nɔ ni yɔɔ shishilɛ
#8	3/4" - 1-1/2"	TEK 2 / Eyɛ ŋmɔlɔ	Hex Washer	14mm	Pɔliɛsta yɛŋ / Klas 4	Dade bibioo, tso
#9	1′′ – 2′′	TEK 2 / henɔ 17	Hex Washer	14mm	Ruspert yɛŋ / klas ejwɛ	Tso, dade ni yɔɔ mlɛo
#10	1′′ – 3′′	TEK 3 / henɔ 17	Hex Washer	14-16mm	Klas 4 blɔfomɛi, Ruspert	14–20ga dade, tso
#12	1-1/4′′ – 4′′	EKƐ 3 / EKƐ 4	Hex Washer	16mm	Ruspert yɛŋ, Klas 4, 304SS	12–20ga dade tsɔnei
#14	2′′ – 6′′	EKƐ 4 / EKƐ 5	Hex Washer / Wafer	16mm	Ruspert yɛŋ, Klas 4, 316SS	10–16ga dade ni tsii
4.8mm	20mm – 100mm	TEK 2 / TEK 3 / Henɔ 17	Hex Washer	14mm	Pɔliɛsta yɛŋ, Klas 4, Ruspert	0.5–3.0mm dade, tso
5.5mm	milimitai etɛ kɛ enumɔ kɛ enumɔ	EKƐ 3 / EKƐ 4	Hex Washer	14-16mm	Klas 4 yɛŋ, Ruspert, 304SS	1.5–5.0mm dade tsɔnei
6.3mm	50mm – 150mm	EKƐ 4 / EKƐ 5	Hex Washer	16mm	Ruspert yɛŋ, 316SS	3.0–12.5mm dade ni tsii

Teknik Paramitai

Driver kɛ ehe kpãa gbee

1/4-inch loo 5/16-inch hex draiva, magnɛtik hex shank

RPM ni ajieɔ yi

1,800–2,000 RPM kɛha dade-kɛ-dade ni akɛfiɔ he | 800–1,000 RPM kɛha tsei ni akɛtsuɔ nii [17†L4-L7].

Nibii ni akɛwoɔ kotoku mli

Adekai babaoo (100-500 pcs), nitsulɔ kotokui (1,000-2,500 pcs), nitsumɔhe adekai

Australia Mlai lɛ anɔyeli

AS 3566 Klas 3 kɛ Klas 4 ni yɔɔ kɛha Australia jarayeli nitsumɔi [6†L5-L7].

Na wɔ

Matiria

C1022A carbon dade (ni mli wa, shishijee mli wa 32–40 HRC, dade mli wa 52–58 HRC) | A2/A4 dade ni bɛ ŋmɔlɔ (304/316)

Su ni akɛwo nɔ

Polyester pauda atade ni ashã | Ruspert ni yɔɔ fãi etɛ yɛŋ | Klas 4 ni akɛ polyester yɛŋ ewo nɔ | Mekanikal ni akɛ dade fee yɛŋ

Sui ahe mlai

9002 (yɛŋ ni tsuɔ nii), RAL 9010 (yɛŋ krɔŋŋ), RAL 9006 (aluminum yɛŋ) | RAL su ni kɛ ehe kpãa gbee yɛ [3†L4-L9][1†L27-L29]

TEK point nyɛmɔ

TEK 2 kɛyashi 1.5mm dade fɛɛ | TEK 3 kɛyashi 3.0mm | TEK 4 kɛyashi 5.0mm | TEK 5 kɛyashi 6.5-12.5mm

Nibii ni akɛwoɔ mli ni fiteɔ nii

13†L5-L9] 1,000+ ŋmɛlɛtswai ni akɛ ŋmei shwieɔ nɔ, dade ni bɛ ŋmɔlɔ (304/316) [13†L5-L9].

Washer ni akɛfiɔ nii ahe

EPDM rɔbɔt ni akɛfee ekome, dɔlɛ ni jɛɔ -40°C kɛyashi +120°C, UV ni nyɛɔ eshiɔ, 14–16mm ŋwɛi ŋta [15†L4-L6] [15†L17-L19]

Nibii ni Akɛtsuɔ Nii Kɛhaa Dade Eyɛŋ ni Akɛwoɔ Tsu He Skrui

Shia dade yɛŋ yiteŋ (shiai, tsɔne amaamɔhei, shĩai)

Shiatsɛmɛi halaa dade ni akɛwoɔ tsũ yiteŋ lɛ yɛŋ ejaakɛ su lɛ tamɔ nɔ ni ehe tse, ni kpɛɔ ni ekɛ ŋmɛnɛŋmɛnɛ beaŋ nɔ kpãa gbee yɛ tsumaa he gbɛjianɔtoo fɛɛ gbɛjianɔtoo mli. Yitso ni kɛ ehe kpaaa gbee ni yɔɔ tsɔne ni akɛfiɔ nii ahe lɛ nɔ lɛ kpataa nakai lakamɔ lɛ hiɛ amrɔ nɔŋŋ. “Dade ni akɛwoɔ tsũ yiteŋ lɛ jieɔ naagba nɛɛ kwraa. Kɛ́ akɛ dade ni ji ediŋŋ, ni ji krim loo ni yɔɔ ŋmɔlɔŋmɔlɔ lɛ tsu nii lɛ, su ni kɛ lɛ kpãa gbee lɛ laajeɔ kɛyaa tsũ lɛ yiteŋ, ni ehaa efeɔ tamɔ nɔ ni nɔ ko nɔ ko bɛ he [8†L3-L10]. kɛ sɛɛjɛkɛmɔ ni ji 300-600mm (12-24 inches) fɛɛ sɛɛjɛkɛmɔ yɛ ŋmɔ lɛ mli kɛ sɛɛjɛkɛmɔ ni bɛŋkɛ kpaakpa ni ji 150-300mm (6-12 inches) yɛ panel nɔ ŋwɛi ŋtayaai kɛ ŋwɛi ŋtayaai amli Kɛ ŋwɛi ŋtayaai diji ni EPDM washers yɔɔ mli lɛ atsu nii kɛha ŋwɛitsu ni nu nyɛŋ abote mli ni ehi shi be kakadaŋŋ.

Kasemɔ wɔ nibii lɛ ahe nii

Jarayeli kɛ Nitsumɔhei Tsui ni Akɛ Kpojiemɔ Eyɛŋ Ewo Mli

Dade yɛŋ ni akɛhaa he lɛ yeɔ jarayeli kɛ nitsumɔhe tsumaa nɔ. Nitoohei, nitsumɔhei, jarayeli hei kɛ nitsumɔhei fɛɛ tsɔɔ tsɔnei diji ni akɛwoɔ mli lɛ mli koni efee nɔ ni he tse, ni ji ŋaalɔ. Akɛ dade yɛŋ ni akɛwoɔ tsũ yiteŋ lɛ tsuɔ nii yɛ panɛl fɛɛ panɛl nɔ, ni kpɛɔ kɛ ŋwɛi ŋta. TEK 3 kɛ TEK 4 lɛ diɛŋtsɛ amɛfoɔ dade purlins ni dalɛ ji gauge 14 mli ni amɛfooo dani amɛfoɔ mli, ni no haaa akɛ ŋmɛlɛtswai babaoo atsu nii yɛ nitsumɔi wuji amli. Bei pii lɛ, jarayeli tsumaa he mlai biɔ ni aŋmala nibii ni fiteɔ nii lɛ akwɛ. Ruspert ŋmɛlɛtswai 1,000 ŋmei ni akɛshwieɔ shi lɛ he odaseyeli lɛ haa nakai shishitoo mlai lɛ tsuɔ nii mlɛo. Yitso ni akpɛ lɛ jogbaŋŋ lɛ yeɔ ebuaa panel lɛ naagbee lɛ koni efee nɔ ni yɔɔ ekomefeemɔ ni tsumaa he ŋaalɔi kɛ mɛi ni kwɛɔ tsu lɛ mli lɛ baasumɔ.

Kasemɔ wɔ nibii lɛ ahe nii

Okwaafoi kɛ Okpɔŋɔnɔtaramɔ Tsui (Kladding Eyɛŋ)

Bei pii lɛ, ŋmɔji, kooloi akwɛmɔhei, tsinabii akwɛmɔhei, kɛ kooloi akwɛmɔhei yɛ dade diŋ ni akɛwoɔ gbogboi ahe koni amɛhe tse ni amɛkpɛ. Skruu eyɛŋ ni akɛwoɔ tsũ yiteŋ lɛ naa okwaayeli mli fɛ̃i, sũ kɛ dɔlɛ tsakemɔi. Klas 4 loo Ruspert nibii ni akɛwoɔ mli lɛ tsiɔ ŋmeii ni jɛɔ kooloi amli nibii ni fiteɔ lɛ amli lɛ naa. Hex washer yitso lɛ haa torque ni he hiaa kɛha oyaiyeli ni akɛ pneumatic tsɔne kudɔlɔi woɔ mli lɛ. Tek screws fiɔ dade purlins ni yɔɔ okwaayeli tsũi wuji ni ajie amɛ kpo afii nyɔŋmai abɔ lɛ anɔ lɛ ahe. Su yɛŋ lɛ tsɔɔ akɛ nibii ni akɛfiɔ he lɛ kɛ paneli yɛŋ lɛ futuɔ. EPDM washer ni akɛwo mli lɛ tsiɔ sũ kɛ ŋmɔtɔ ni kulɛ ebaabote tsu lɛ mli lɛ naa.

Kasemɔ wɔ nibii lɛ ahe nii

Hulu Panɛl Nɔyaa Gbɛjianɔtoi (Frɛm ni Akɛwo Eyɛŋ)

Nibii ni akɛwoɔ shikpɔŋ loo tsũ yiteŋ lɛ ahe saji ni yaa hiɛ lɛ haa tsu lɛ he mfonirifeemɔ lɛ feɔ fɛo. White Tek screws lɛ fiɔ tsɔnei ni akɛwoɔ tsɔne mli lɛ ahe kɛyaa dade tsũi anɔ koni ekwɛ jogbaŋŋ yɛ tsɔne lɛ shishi. Solar panels lɛ kɛ muji kɛ kɔɔyɔɔ ni tsiimɔ ni biɔ TEK 4 loo TEK 5 points lɛ fataa he koni ebote ŋwɛitsu lɛ yiteŋ panel lɛ kɛ dade ni akɛfee lɛ fɛɛ mli [16†L4-L7]. Atsɔseɔ wɔ kɛyashiɔ October 2023 saji amli.” Nɔ ni he hiaa yɛ enɛ mli ji ŋmeii ahebuu – hulutsoo be mli nibii lɛ yɛ afii 25 ni akpaa gbɛ akɛ amɛbaatsu nii, no hewɔ lɛ Ruspert loo 304 dade ni bɛ ŋmɔlɔ ni akɛwoɔ mli lɛ bafeɔ nɔ ni akɛtsuɔ nii, shi jeee nɔ ni atsakeɔ.

Kasemɔ wɔ nibii lɛ ahe nii

HULU

Gbɛtsɔɔmɔ ni kɔɔ bɔ ni akɛwoɔ mli kɛ halamɔ he

TEK Point ni Ja ni Ohalaa Kɛha Odade Shishitoo lɛ

TEK yibɔ lɛ tsɔɔ bɔ ni dade ni akɛwoɔ o-skru lɛ mli lɛ baanyɛ abote mli ni eshãaa ŋwɛigbɛ. Kɛ́ okɛ he ko ni yɔɔ kuku fe odade lɛ mli tsɔne lɛ tsu nii lɛ, ebaaha shãa aba—drili lɛ naa lɛ mli dɔɔ fe nine ni ehiɛɛɛ shiŋŋ dani skru lɛ baata shi. Kɛ́ akɛ oti ko tsu nii be kakadaŋŋ fe bɔ ni ehe hiaa lɛ, efiteɔ be.

TEK 2: Efoɔ dade ni shɛɔ 1.5mm (22–26 gaaji). Ehi kɛha dade ni mli tseee, kladiŋ bibioo, kɛ HVAC ductwork.

TEK 3: Nɔ ni fe fɛɛ kɛha dade ni dalɛ ji 1.5–3.0mm (14–20 gaaji). Enɛ ji nɔ ni mɛi ni feɔ tsũi ayiteŋ lɛ ateŋ mɛi babaoo kɛtsuɔ nii kɛhaa dade-kɛ-dade ni akɛfiɔ shia, okwaayeli, kɛ jarayeli nitsumɔi ni waaa lɛ amli [16†L26-L29].

TEK 4: Eboteɔ dade mli kɛyashiɔ 5.0mm (10–12 gaaji). Ehe miihia kɛha dade ni tsii ni akɛtsuɔ nii yɛ nitsumɔhei, hulutsoo be mli nibii, kɛ hei ni kɔɔyɔɔ tswaa waa yɛ lɛ.

TEK 5: Kɛha dade ni shɛɔ 12.5mm—jarayeli tsɔne ni akɛwoɔ tsɔne mli, I-beam ni akɛwoɔ mli, kɛ tsɔne he nitsumɔi ni tsii.

Henɔ 17 – Nɔ ni yɔɔ ŋmɔlɔŋmɔlɔ kɛha Tsolɛlɛ

Kɛha tsei ahe ŋtayaai, tsei ahe ŋtayaai shi plywood ŋtayaai ahe lɛ, okɛ ŋtayaa ni yɔɔ ŋta ni ji Type 17 lɛ atsu nii shi jeee TEK ŋtayaa ni akɛfoɔ ŋtayaa. Type 17 point lɛ yɛ tip notch ko ni jieɔ tso lɛ mli tsɔji lɛ amli be mli ni skru lɛ yaa hiɛ lɛ, ni ehaaa mli agbala mli ni ehaa eboteɔ mli oya. Kɛha sɛɛnamɔi ni ato he gbɛjianɔ akɛ ajieɔ kɛjɛɔ mli lɛ, esa akɛ akɛ tsɔne ni akɛ tsɔne ebɔ he lɛ ni fa fe 25mm (1 inch) awo tso ni wa mli.

EPDM Washer Shitaramɔhe – Nɔ ni Haa Leak Baa Fe Fɛɛ

Bei pii lɛ, dade ni hoɔ kɛjɛɔ ŋwɛitsu lɛ nɔ lɛ jɛɔ ŋwɛitsu lɛ diɛŋtsɛ mli. Akɛ washers lɛ wooo mli jogbaŋŋ, ni no kɛ naagbai nɛɛ baa.Drive screw kɛyashi EPDM washer lɛ baashɛ panel lɛ hiɛ ni ekɛmiimii shi fioo yɛ hex yitso lɛ he Esa akɛ ona washer lɛ ni efee ŋmɔlɔŋmɔlɔ fioo shi rɔba ko bɛ ni miimii shi yɛ hex yitso lɛ naa. Kɛji akɛ rɔba lɛ je kpo kɛho eyitso lɛ he lɛ, no lɛ otsɔ mli fe nine ni nakai tsɔne ni akɛfɔɔ nii ahe lɛ baafee nɔ ni sɛɛ efooo ni yɛ naagbee lɛ ebaagbala ni nu ajɛ mli. Kɛji akɛ washer compression bɛ lɛ, nu baanyɛ atsɔ tsɔne lɛ he. Kɛji ootao ni otswa he ni ŋɔɔ lɛ daa lɛ, kɛ magnetic hex draiva ni yɔɔ skru tu ni klatsi lɛ mli wa fioo lɛ atsu nii. Kaaha tsɔne ni haa mɔ tsui nyɔɔ emli lɛ miitsu nii yɛ nitsumɔ nɛɛ mli.

Oyaiyeli ni akɛwoɔ mli lɛ he ŋaawoo.

Kɛha tsei: 800-1,000 rpm. Oyaiyeli ni yɔɔ blɛoo lɛ tsiɔ mligbalamɔ naa ni ehaa Type 17 point lɛ tsɔɔ tso mli tsɔji lɛ amli jogbaŋŋ.

Yɛ dade ni tsiimɔ waaa mli: kudɔ yɛ 1,800-2,000 RPM [17†L4-L7].

Kaaha 1,800-2,000 RPM lɛ miiho kɛji oofo dade ŋtayaai ni tsii (3mm+) amli. Nɔ ni nɔ kwɔ fe enɛ ni obaajie dɔlɛ ni shãa TEK points lɛ kpo. Kɛ daa skru tu ni klatsi ni anyɛɔ atsakeɔ lɛ atsu nii shi jeee tsɔne ni tswaa tsɔne ni tswaa mɔ he.

Na Quote Oya

Gbɛtsɔɔmɔi ni kɔɔ he ni akɛ dade yɛŋ ni akɛwoɔ tsũ yiteŋ lɛ he

He ni Panel lɛ yɔɔ	Skru Gbɛ
Eaves, ŋwɛi ŋta, kɛ gable naagbee	150mm (inchi 6) ni fe fɛɛ
Yɛ panɛl nɔ kɛ eshishi (hei ni kɔɔyɔɔ enaa hewalɛ)	150-300mm (inchi 6-12)
Jarayeli ŋmɔ mli hei ni yɔɔ shĩa mli/kane mli	300-600mm (inchi 12-24)
Kɔɔyɔɔ ni naa wa waa yɛ (ŋshɔnaa, hei ni yɔɔ faŋŋ)	150mm (intsii ekpaa)

Panel ni yɔɔ shishigbɛ lɛ biɔ ni akɛ skru awo jɔɔ fɛɛ jɔɔ mli. Kɛha ŋwɛi ŋta ni nyiɛ sɛɛ lɛ, fimɔ jɔɔ kroko fɛɛ kroko yɛ gbɛ ni tsɔɔ ŋwɛi ŋta ni ji enyɔ lɛ nɔ—kɛji ŋta ni ji enyɔ lɛ kɛ jɔɔ ni ji enyɔ kɛ ejwɛ lɛ tsuɔ nii lɛ, esa akɛ ŋta ni ji etɛ lɛ kɛ klɛŋklɛŋ nɔ lɛ, nɔ ni ji etɛ lɛ, kɛ nɔ ni ji enumɔ lɛ atsu nii. Nɛkɛ gbɛ ni yɔɔ srɔtoi nɛɛ haa ŋwɛitsu lɛ feɔ shweshweeshwe. Yɛ he ni eyɔɔ lɛ he (he ni kɔɔyɔɔ baanyɛ awó ŋwɛi ŋtayaai lɛ anɔ lɛ), kɛ ŋtayaai awo jɔɔ fɛɛ jɔɔ lɛ mli ekɔɔɔ he eko bɔ ni amɛteŋ jɛkɛmɔ yɔɔ ha [12†L16-L22].

Esa akɛ sɛɛgbɛ ni yɔɔ ŋwɛigbɛ lɛ ahi shi kɛ hoo lɛ 50mm (2 inches) kɛjɛ panɛl lɛ sɛɛgbɛ koni akagbala loo agbala mli.

Nɔ ni Akɛwoɔ Nɔ lɛ Halamɔ kɛtsɔ Shihilɛ Nɔ

Maamii	Nɔ ni Akɛwoɔ He Yi
Mligbɛ ni egbi (atriums, mligbɛ kladiŋ)	Pauda yɛŋ ni akɛwo zinc nɔ (ni sa)
Kponɔgbɛ nɔ ni sa (shihilɛhe, okwaayeli, jarayeli ni yɔɔ mlɛo kɛjɛ ŋmei nu he)	Klas 4 ni akɛ dade fee + polyester pauda atade yɛŋ (ŋmɛlɛtswai 500–1,000 ŋoo shwiemɔ)
Ŋshɔnaa (yɛ nu ni mli edɔ kilomitai 10 mli), hulutsoo be babaoo, nitsumɔhei	Ruspert nɔ ni akɛwo mli etɛ yɛŋ (ŋmɛlɛtswai 1,000+ ŋoo sprese)
Tsuji ni yɔɔ momo lɛ asaamɔ/atsakemɔ	Mɛkanikal ni akɛ dade fee yɛŋ (ReGripTM henɔ)
Ŋshɔ hiɛ lɛlɛdaamɔhei, tsofafeemɔ hei, shihilɛi ni mli wa waa	304 loo 316 dade ni sɛɛ efooo ni akɛ yitso ewo nɔ yɛŋ

Kɛha ŋshɔnaa nibii ni akɛwoɔ mli loo nitsumɔhei ni tsofai yɔɔ mli lɛ, wɔkɛ Ruspert triple-layer loo 316 dade ni bɛ ŋmɔlɔ woɔ ŋaa waa. Akɛ Standard Class 4 skrui ni akɛ penti yɛŋ ekpɛ lɛ etsɔɔɔ ŋshɔnaa shihilɛi ni fe be kukuoo mli nibii ni ajieɔ lɛ kpo lɛ.

Sui ni kɛ amɛhe kpãa gbee kɛ RAL Mlai

Wɔkɛ ŋwɛi ŋtayaai yɛŋ ni akɛ RAL sui wuji ewo mli lɛ haa

Na wɔ

RAL 9002 (Eyɛŋ)

Eyɛŋ ni mli edɔɔ fioo, ni afɔɔ namɔ yɛ Europe shĩai kɛ jarayeli hei ni yɔɔ mlɛo lɛ anɔ.
RAL 9010 (Eyɛŋ krɔŋŋ)

Eyɛŋ ni kpɛɔ ni he tse kɛha ŋmɛnɛŋmɛnɛ beaŋ tsumaa he nitsumɔi.
RAL 9006 (Aluminium yɛŋ)

Eyɛŋ ni mli ejɔ ni dade ni yɔɔ shishi lɛ yɔɔ mlɛo, ni ehe gbɛi waa kɛha nitsumɔhei ni akɛwoɔ tsɔne mli lɛ.

Kɛha nitsumɔhe nibii ni abiɔ lɛ, wɔbaanyɛ wɔkɛ RAL kood loo kusum naa shade yɛŋ fɛɛ ato he. Ha panel nɔkwɛmɔnɔ loo RAL yibɔ, ni wɔbaafee nɔ ni kɛ lɛ kpãa gbee.

Nihɔɔlɔi Hetoo diɛŋtsɛ

Tsu lɛ he gbɛjianɔtoo lɛ biɔ ni akɛ dade yɛŋ ni kpɛɔ awo ŋwɛitsu lɛ nɔ fɛɛ. Jwɛi ni akɛfiɔ nii ahe lɛ jeee nɔ ko ni ahalaa kɔkɔɔkɔ. Mikɛ Sinsun ŋtayaai yɛŋ ni ji RAL 9010 TEK 3 lɛ—#12 kɛ 75mm, ni Ruspert ehà nɔ lɛ ba. Akɛ su ni kɛ ŋtayaai lɛ kpãa gbee lɛ je kpo, ni TEK ŋtayaai lɛ tsɔ dade ni ji 1.5mm lɛ mli amɛfee 2.0mm purlins ni shãaa ko bɛ he. Mɛi ni tsuɔ nii yɛ lɛlɛ lɛ mli lɛ jo foi kɛtsɔ skrui aaafee 8,000 nɔ yɛ otsi kome mli, ni hex yitsei lɛ kɛ wɔ magnetic tsɔnei lɛ tara shi be fɛɛ be. Yɛ fɛ̃i bei enyɔ ni wɔkɛfã gbɛ kɛtee fɛ̃i mli lɛ sɛɛ lɛ, nu ko hoɔ, ŋmei lá hoɔ kɛtsɔɔ pɛnte yɛŋ lɛ mli, ni tsutsɛ lɛ etsɔɔ wɔ nitsumɔi krokomɛi enyɔ momo.

'-Thomas Bauer (tsu yiteŋ nitsulɔ, Munich, Germany)

Kooloi akwɛmɔhei lɛ biɔ ni amɛmli afee fɛo, no hewɔ lɛ atsɔɔ gbogbo ni yɔɔ futafuta mli lɛ mli fɛɛ. Esa akɛ fastener lɛ su lɛ kɛ lɛ akpã gbee. Mikɛ Sinsun yɛŋ ni ji Class 4 ni akɛ dade fee ni ji M5.5×65mm hex yitso ŋtayaai lɛ tsu nii kɛha gbogbo lɛ he ŋtayaai lɛ fɛɛ. TEK 3 points lɛ tsɔ 0.7mm dade ŋtayaai amli kɛtee 1.6mm dade purlins ni nɔ ko nɔ ko bɛ ni tsɔɔ mli dani atswaa, ni powda yɛŋ ni akɛwo nɔ lɛ hi shi shiŋŋ ni nɔ ko nɔ ko bɛ mli. EPDM tsɔnei ni akɛfɔɔ nii ahe lɛ tsiɔ Ireland hulutsoo be lɛ naa jogbaŋŋ. Yɛ nyɔji 18 ni akɛ ŋmɔtɔ kɛ ammonia woɔ mli be fɛɛ be lɛ sɛɛ lɛ, skru lɛ ejieee ŋmɔtɔ tsuru ko kpo ni pɛnte yɛŋ lɛ hu efeee ŋmɔtɔ. Shika fɛɛ ni akɛwoɔ mli lɛ bashɛ shika he gbɛjianɔtoo lɛ shishi ejaakɛ wɔkɛ nitsumɔ to dani atswaa shikpɔŋ lɛ.

Liam O'Sullivan (Okwaayeli Tsumalɔ, Cork Maŋ lɛ, Ireland)

Mi ŋshɔnaa nitsumɔhei lɛ miitao tsũ yiteŋ ŋtayaai yɛŋ ni baanyɛ ahi shi yɛ ŋmei ni ashwieɔ nɔ lɛ mli ni efiteee loo ehiɛɛɛ ŋmei. Mika Sinsun ŋmei ni akɛ Ruspert ewo mli lɛ mikwɛ yɛ mi diɛŋtsɛ mi ŋmei shwiemɔ tsu lɛ mli. Yɛ ŋmɛlɛtswai 1,000 ni akɛtsu nii yɛ ASTM B117 lɛ eko fɛɛ eko sɛɛ lɛ, nɔ ni akɛwo nɔ lɛ ejieee ŋmɔtɔ tsuru ko kpo ni ŋmɔtɔ yɛŋ lɛ hu etsɔɔɔ ŋmɔtɔ loo esɛɛ efooo. Amrɔ nɛɛ mikɛ Sinsun ŋwɛi ŋtayaai ni yɔɔ RAL 9002 kɛ RAL 9010 lɛ efata mi-stɔki lineup lɛ he yɛ nitoohei etɛ amli. Nɔ ni tsɔɔ akɛ manyɛ makɛ adekai ni jɛ nifeemɔi srɔtoi amli lɛ afutu ni srɔtofeemɔ ko ni anaaa yɛ ŋwɛitsu lɛ nɔ. Mi-kontrakta jarayelɔi lɛ miibi Sinsun gbɛi bianɛ, ni ebako mi tsutsu nihɔɔlɔ lɛ nɔ pɛŋ .

Pieter de Vries (Tsumaa Nibii Jalɔ, Rotterdam, Netherlands)

Sanebimɔi ni Abiɔ Be Fɛɛ Be (FAQ)

Sanebimɔ: Mɛni atsɛɔ ŋwɛi ŋtayaai yɛŋ yɛ tsumaa nitsumɔ mli?

A: Obaanu akɛ atsɛɔ amɛ Tek ŋtayaai yɛŋ, ŋwɛi ŋtayaai yɛŋ ni shwieɔ amɛhe, ŋwɛi ŋtayaai ni kɛ amɛhe kpãa gbee, dade ŋtayaai yɛŋ, loo ŋtayaai yɛŋ kɛkɛ.

Sanebimɔ: Mɛɛ RAL sui ahe koodii ni ŋwɛi ŋtayaai yɛŋ lɛ baa mli?

A: Wɔkɛ ŋwɛi ŋtayaai yɛŋ ni yɔɔ RAL 9002 (yɛŋ yɛŋ), RAL 9010 (yɛŋ krɔŋŋ), kɛ RAL 9006 (aluminium yɛŋ) haa akɛ nɔ ni akɛtsuɔ nii. RAL su ni kɛ ehe kpãa gbee yɛ kɛha nitsumɔhe nibii [3†L4-L9][1†L27-L29].

Sanebimɔ: Ani manyɛ mikɛ ŋtayaai ni akɛ zinc ewo mli ni afɔɔ nitsumɔ lɛ atsu nii yɛ ŋtayaai yɛŋ ni akɛwoɔ tsũ yiteŋ lɛ najiaŋ?

A: Obaanyɛ, shi shika yitsei lɛ baadamɔ shi yɛ ŋtayaai yɛŋ lɛ ahe, ni ebaafite fɛo lɛ. Akɛ tsɔnei ni akɛwoɔ tsũ yiteŋ lɛ ahe tsɔi yɛŋ lɛ tsuɔ nii koni akɛfutu mli, ni ekɛ nɔ ni he tse, ni ji ŋaalɔi agbe naa ni shĩatsɛmɛi kɛ jarayelɔi kpaa gbɛ lɛ baa.

Sanebimɔ: Te mafee tɛŋŋ matsi tsũ yiteŋ ŋtayaai yɛŋ lɛ anaa koni amɛkafee ŋmei yɛ ŋshɔnaa tsũ yiteŋ?

A: Tsɔɔmɔ ŋwɛi ŋtayaai yɛŋ ni akɛ Ruspert triple-layer coating (ŋmɛlɛtswai 1,000+ ŋmei ni akɛshwieɔ shi lɛ ekwɛ) loo 304 dade ni sɛɛ efooo ni akɛ yitso ni akɛwo mli lɛ yɛŋ. Kɛha ŋmei nu ni ajieɔ lɛ kpo tɛ̃ɛ lɛ, halamɔ 316 dade ni bɛ ŋmɔlɔ. Akɛ Standard Class 4 ni akɛ penti yɛŋ ekpɛ lɛ etsɔɔɔ ŋshɔnaa shihilɛi.

Sanebimɔ: Ani ŋwɛi ŋtayaai yɛŋ kɛ EPDM washers ni akɛkpɛtɛɔ he lɛ baa?

A: Hɛɛ. Sinsun ŋwɛi ŋtayaai yɛŋ lɛ fɛɛ kɛ EPDM ŋtayaai ni akɛfiɔ he lɛ ni abua naa momo yɛ hex yitso lɛ shishi lɛ tsuɔ nii. Nɔ ni akɛfɔɔ nii lɛ hiɔ shi yɛ nyɔŋyeli mli yɛ be mli ni akɛmajeɔ kɛ akɛwoɔ mli lɛ, ni EPDM rɔba lɛ hiɔ shi kɛjɛɔ -40°C kɛyashiɔ +120°C [10†L4-L11][15†L21-L22].

Sanebimɔ: Mɛɛ TEK point he hiaa mi kɛha 0.7mm dade ni akɛwoɔ 1.6mm dade purlins nɔ lɛ?

A: Okɛ #12 loo M5.5 ŋwɛi ŋta ni TEK 3 point yɔɔ mli lɛ atsu nii. TEK 3 lɛ tsuɔ dade lɛ fɛɛ he nii (0.7 + 1.6 = 2.3mm) ni shãaa [14†L4-L7].

Sanebimɔ: Ani manyɛ mikɛ ŋwɛi ŋtayaai yɛŋ atsu nii yɛ polycarbonate loo bitumen ŋtayaai anɔ?

A: Kɛha polycarbonate lɛ, okɛ ŋtayaai yɛŋ ni yɔɔ ŋtayaa ni akɛfoɔ ŋtayaa kɛ EPDM ŋtayaa ni da fe nine lɛ atsu nii koni akɛtsi haomɔ mli ŋtayaai ni jɛɔ hulutsoo mli lɛ naa. Kɛha sũ (Corrapol® style) lɛ, kɛ skruu yɛŋ ni hiɛ tsitsi ni ebɔle ehe ni kɛ sũ lɛ he mfoniri lɛ kpãa gbee lɛ atsu nii [12†L6-L10].

Sanebimɔ: Skrui yɛŋ ni akɛwoɔ tsũ lɛ yiteŋ lɛ enyiɛ he miihia mi yɛ sqɛɛ mita kome mli?

A: Kɛha ŋwɛi ŋta ni yɔɔ 900mm purlin sɛɛjɛkɛmɔ lɛ, bu aaafee ŋtayaai 9 he akɔntaa yɛ sqɛɛ mita kome mli. Yɛ 600mm teŋ jɛkɛmɔ, aaafee 14 skrui yɛ sqɛɛ mita kome mli. Be fɛɛ be lɛ, akɛ ekrokomɛi fataa he kɛha jwɛi kɛ gbɛ ni kã amɛteŋ lɛ tsakemɔi.

Sanebimɔ: Mɛni ji tsɔne kudɔmɔ bibioo lɛ dalɛ kɛha hex yitso ŋwɛi ŋtayaai yɛŋ?

A: Dade yɛŋ ni akɛwoɔ tsũ yiteŋ ni jɛ Sinsun lɛ kɛ 1/4-inch loo 5/16-inch hex tsɔne tsuɔ nii, ni ekɛ magnetic hex shank tsɔne kudɔlɔi kɛ nut tsɔnei ni akɛtsuɔ nii [10†L33-L34] lɛ kpãa gbee.

Sanebimɔ 10

Sanebimɔ: Ani okɛ AS 3566 ni yɔɔ ŋwɛi ŋtayaai yɛŋ ni akɛwoɔ ŋwɛi ŋtayaai amli lɛ haa Australia jarayelihe lɛ?

A: Hɛɛ. Wɔfeɔ tsɔnei ni akɛwoɔ tsũ yiteŋ ni amɛ diɛŋtsɛ amɛfoɔ amɛhe lɛ yɛ AS 3566 Class 3 kɛ Class 4 mlai lɛ anaa kɛhaa Australia tsumaa jarayelihe lɛ. AS 3566.2:2025 tsɔɔ nɔ ni he hiaa kɛha hex-head self-drilling screws ni akɛtsuɔ nii yɛ tsũ yiteŋ kɛ tsũi ahe nitsumɔhe lɛ [6†L14-L18]. Australia jarayelihe lɛ biɔ nɛkɛ woji nɛɛ koni akɛye mlai lɛ anɔ.

Sanebimɔ 11

Sanebimɔ: Te mafee tɛŋŋ male kɛji ŋwɛi ŋtayaa yɛŋ ko yɛ nɔ ni buɔ mɔ he jogbaŋŋ kɛjɛɔ ŋmeii ahe?

A: Taomɔ ŋmei ni akɛshwieɔ shi lɛ he kaa hetooi ni aŋmala ashwie shi (ASTM B117). Wɔ Ruspert-coated screws lɛ haa ŋmɛlɛtswai 1,000+ ni ŋmei tsuru bɛ mli, yɛ be mli ni ŋmɛlɛtswai 500–1,000 haa. Wɔbaanyɛ wɔkɛ kaa he amaniɛbɔɔ aha kɛji abi [13†L5-L9].

Sanebimɔ12

Sanebimɔ: Ani okɛ nitsumɔhe lɛ jara tɛ̃ɛ haa yɛ ŋwɛi ŋtayaai yɛŋ nɔ?

A: Hɛɛ. Sinsun feɔ dade ni akɛwoɔ tsũ yiteŋ ni akɛwoɔ tsũ yiteŋ lɛ tɛ̃ɛ kɛhaa mɛi ni kɛ amɛhe woɔ nitsumɔ mli, mɛi ni jaa, kɛ nitsumɔhei ni heɔ nii yɛ Europa, Australia, UK, kɛ jeŋ fɛɛ lɛ. Kɛ ogbɛjianɔtoo lɛ—diamita, elɛɛmɔ, TEK point, coating, RAL su code, kɛ afi mli volume—ni wɔbaasaa jara ni ato he gbɛjianɔ ni yeɔ jara ni jaraa lɛ nɔ kunim lɛ nɔ kunim.

Sanebimɔ 13

Sanebimɔ: Ani manyɛ maná ŋwɛi ŋtayaai yɛŋ ni EPDM washer diŋ yɔɔ mli yɛ ŋtayaai yɛŋ najiaŋ?

A: Hɛɛ, wɔ washers ni afɔɔ nitsumɔ lɛ ji EPDM rɔbɔt diŋ, ni haa sɛɛfimɔ nitsumɔ lɛ nɔŋŋ yɛ jara ni baa shi fe tsutsu lɛ nɔ. Kɛha nitsumɔi ni biɔ ni afee fɛo yɛŋ kwraa lɛ, wɔbaanyɛ wɔkɛ EPDM washers yɛŋ aha yɛ nitsumɔhe lɛ famɔi ni afee lɛ diɛŋtsɛ nɔ.

Sanebimɔ 14

Sanebimɔ: Mɛni ji ŋwɛi ŋtayaai yɛŋ ni akɛwoɔ ŋwɛi ŋtayaai amli lɛ wala be?

A: Kɛ akɛto shihilɛi ni mli egbi, ni yɔɔ shĩa mli yɛ shishijee nibii amli lɛ, ŋwɛi ŋtayaai yɛŋ lɛ buɔ ŋtayaai ahe afii babaoo. Polyester ni ashã kɛ Ruspert ni akɛwoɔ mli lɛ nyɛɔ ehiɔ shi yɛ UV mli, ni efiteee kwraa kɛ́ akɛto he. Kɛha nibii ni akɛtoɔ be kakadaŋŋ lɛ, ha adekai ahi shikpɔŋ ni akɛ kɔnkrit fee lɛ nɔ, ni okɛto he ko ni ŋmɔtɔ bɛ he.

Sanebimɔ 15

Sanebimɔ: Ani okɛ sample packs haa dani mikɛ bulk oda?

A: Eji anɔkwale. Wɔkɛ dade yɛŋ ni akɛwoɔ tsũ yiteŋ lɛ mli ŋtayaai adekai ni yɔɔ o-diameter, elɛɛmɔ, kɛ RAL white shade ni otsɔɔ lɛ mli lɛ he nɔkwɛmɔnɔ adekai majeɔ—okɛ amɛ atsu nii kɛtsɔ odɛŋdadei lɛ anɔ, kaa amɛ okwɛ yɛ o-panel lɛ nɔ, okwɛ bɔ ni amɛhe su lɛ kpãa gbee, bɔ ni washer lɛ ta shi, kɛ bɔ ni nɔ ni akɛwoɔ mli lɛ sɛɛ tsɛɔ ha. Nɔ ni hi jogbaŋŋ lɛ he nɔmimaa ji gbɛ pɛ ni atsɔɔ nɔ aheɔ fasteners kɛ hekɛnɔfɔɔ.

Sanebimɔ16

Sanebimɔ: Mɛni ji Sinsun ŋwɛi ŋtayaai yɛŋ lɛ wala be?

A: Nɔkwɛmɔnii ni atsɔɔ nɔ atsuɔ nii lɛ hiɔ shi afii 15–20; dade ni bɛ ŋmɔtɔ henɔi lɛ yaa hiɛ kɛyashiɔ afii 30+.

Nɔ Hewɔ ni Ahalaa Sinsun Nitsumɔhe lɛ

Akɛni wɔji ŋaalɔi ni feɔ nibii ni akɛfiɔ nii ahe lɛ hewɔ lɛ, wɔkɛ wɔjwɛŋmɔ maa R&D kɛ tsɔnei ni akɛwoɔ tsũ yiteŋ ni kɛ amɛhe kpãa gbee lɛ afeemɔ babaoo nɔ. Wɔ kudɔɔ nifeemɔ gbɛjianɔtoo fɛɛ gbɛjianɔtoo kɛjɛ dade nibii ahalamɔ nɔ kɛyashi nɔ ni akɛwoɔ nɔ lɛ nɔ tsamɔ nɔ. Wɔ ŋwɛi ŋtayaai yɛŋ lɛ haa su ni yɔɔ shiŋŋ, kɔɔyɔŋ tsakemɔi ni hi jogbaŋŋ kɛ tsɔne nitsumɔ ni anyɛɔ akɛ he fɔ̃ɔ nɔ.

Wɔ haa nitsumɔhe lɛ jara tɛ̃ɛ ni akadimɔ ko bɛ he, nitsumɔi ni afee lɛ bɔ ni osumɔɔ kɛ kwɛmɔ ni mli wa dani akɛbaa. Kɛji akɛ otsuɔ nii akɛ tsumaa he nibii ajalɔ, tsɔne he nitsulɔ loo tsumaa nitsumɔhe lɛ, wɔ nibii lɛ kɛ oshihilɛhe, jarayeli kɛ maŋ tsumaa he nibii ni otaoɔ lɛ kpãa gbee kwraa. Kpeemɔ wɔ kuu lɛ ŋmɛnɛ koni onine ashɛ jarayeli nibii heei kɛ nitsumɔ lɛ he tsabaa ni aheee nɔ ko nɔ ko nɔ.

Na Quote Oya

Keep In Touch

TO KNOW MORE ABOUT Sinsun, PLEASE CONTACT US!

We are committed to providing you with the best quality service and look forward to communicating with you to solve problems together and bring you a better experience.

our experts will solve them in no time.

Skrui ni akɛwoɔ tsũ yiteŋ yɛŋ