Carbon Dade ni Akɛwo Phillips He-Tap Tso Skrui
Tsɔɔmɔ dani atsuɔ nii. Tsɔ tsɔne kɛbote tso mli tɛ̃ɛ.
Hewalɛ, ni hiɔ shi daa kɛha tso nitsumɔ fɛɛ nitsumɔ.
Oya, shweshweeshwe ni akɛwoɔ mli, yɛ shia kɛ kpo nɔ.
Sinsun He-Tap Tso Skru:Kudɔ Oya, Hiɛ Hewalɛ, Pre-Drill He Ehiaaa
Afee yɛ wɔ diɛŋtsɛ wɔ nitsumɔhe lɛ kɛha nɔ ni hi jogbaŋŋ kɛ jara ni akaa mɔ he. Wɔ self-tapping tso screws lɛ kudɔɔ tɛ̃ɛ ni ekɛ tsɔne tsuuu nii dani, ni ehaa obei kɛ nitsumɔ baa shi. Na jara babaoo kɛ kusum naa tsabaai kɛjɛ jɛɛhe lɛ tɛ̃ɛ.
Na Quote Oya
| Su / Taomɔ nii | Kusum Tso Skrui | Sinsun He-Tap Tso Skrui |
| Gbɛjianɔtoo ni akɛwoɔ mli | 2-Step Gbɛjianɔtoo: 1. Gbalamɔ pilot bu. 2. Drive skru. | 1-Step Gbɛjianɔtoo: Drive skruu lɛ tɛ̃ɛ. Nibii ni yɔɔ ŋwɛi lɛ, threads lɛ tswaa. |
| Dɛŋdadei ni He Hiaa | Drill (kɛha pilot bu) + Driver Bit. | Driver Bit pɛ. Ejieɔ drill & bit tsakemɔ. |
| Be kɛ Nitsumɔ | +50-100% be babaoo kɛha skru fɛɛ skru yɛ gbɛjianɔtoo kɛ ŋtayaa hewɔ. | Kɛwo mli kɛyashi 50% oya. Gbɛjianɔtoo ko bɛ, tsɔne kudɔmɔ ni yaa nɔ. |
| Hesaai / Tɔmɔ Oshara | Nɔ ni nɔ kwɔ. Pilot bu ni ejaaa loo dalɛ ni ejaaa kɛ mligbalamɔ loo ŋmɛlɛtswaa ni bɛ hewalɛ baa. | Shishi. Afee koni ekɛba mligbalamɔ shi; hetooi ni yaa nɔ daa kɛha mɛi ni he esa kɛ DIYers. |
| Ehi Fe Fɛɛ Kɛha | Nitsumɔi ni naagbee pɛpɛɛpɛ yɛ tsei ni wa waa nɔ lɛ he hiaa waa. | Kɛtsu nii: Frem, deki, fɛ̃i, shĩa mli nibii, tsumaa fɛɛ. |
| Anɔkwale Jara | Nibii ahe nyɔmɔwoo + nitsumɔ be ni fa babaoo kɛ dɛŋdadei ni awoɔ. | Nibii ahe nyɔmɔwoo + nitsumɔ be fioo. Nitsumɔ fɛɛ nitsumɔ mli hewalɛwoo ni nɔ kwɔ. |
Nɔ ni yɔɔ shishijee:
Skrui ni tswaa amɛhe lɛ jeee nɔ ko ni yɔɔ srɔto kɛkɛ; amɛji gbɛ ni atsɔɔ nɔ akɛfiɔ nii ahe ni tsuɔ nii jogbaŋŋ. Kɛtsɔ ŋtayaa kɛ ŋtayaa ni akɛfiɔ he lɛ ni akɛaafee ekome lɛ nɔ lɛ, amɛhaa be ni anyɛɔ asusuɔ he lɛ baa shi, amɛhaa dɛŋdadei ahe naagbai baa shi, ni amɛhaa tɔmɔi baa shi, ni ehaa shika ni akɛwoɔ mli lɛ he nyɔmɔwoo ni yɔɔ faŋŋ haa kɛha nitsumɔ fɛɛ nitsumɔ.
Sharp He-Driling He ŋaawoo
Enɛ ji nɔ ni he hiaa fe fɛɛ. Nɔ ko ni yɔɔ ŋmɔlɔ ni mli wa tsuɔ nii tamɔ tsɔne ni akɛfoɔ nii amli, ni eboteɔ nibii amli jogbaŋŋ ni enyiɛɛɛ loo ehe ehiaaa hewalɛ fe nine.
Nɔ ni hi jogbaŋŋ: Eshishigbɛ lɛ ji nɔ ni kɛ ehe kpãa gbee, ni eyɛ dade ni akɛ carburized kɛ quenched dade fee ni eyɛ ŋwɛigbɛ ni yɔɔ ŋmɔlɔŋmɔlɔ.
Nɔ ni bɛ sɛɛnamɔ: Eshishigbɛ lɛ mli edɔ, eyɛ kokroo, loo ekɛ ehe kpaaa gbee, ni no haaa atsu nii jogbaŋŋ yɛ ŋshɔ lɛ mli, ni ekolɛ ehe baahia ni atsu nii dani atsu he nii, nitsumɔ ko ni shishijee lɛ esusuuu he akɛ ebaatsu.
Threads ni mli kwɔ ni tsuɔ nii jogbaŋŋ
Jeee akɛ esa akɛ tsɔji lɛ anyɛ ahiɛ muji kɛkɛ, shi moŋ esa akɛ amɛnyɛ amɛjie tsɔji ni shwieɔ shi lɛ oya ni amɛfee mlɛo, amɛtsi tsɔji ni shwieɔ shi lɛ anaa, ni amɛkwɛ koni tsɔji ni amɛ diɛŋtsɛ amɛfeɔ lɛ aya nɔ jogbaŋŋ ni efee oya.
Nɔ ni hi jogbaŋŋ: Amɛtsiɔ chips lɛ anaa koni amɛkatsi bu lɛ mli ni amɛkatsi amɛhe yɛ be mli ni akɛwoɔ mli lɛ.
Nɔ ni Ehiii: Kpãai ni afee lɛ jogbaŋŋ lɛ haa ŋmeii buaa amɛhe naa yɛ bu lɛ mli, ni ehaa tsɔne ni akɛtswaa tsɔne lɛ yaa hiɛ, ni ehaa oshara ni yɔɔ akɛ ebaakumɔ lɛ yaa hiɛ.
Nɔ ko ni akɛwoɔ nɔ ni shãaa.
Nɔ ni akɛwoɔ mli lɛ haa oleɔ be abɔ ni skru lɛ baahi shi kɛji ebaatsu nii yɛ shihilɛ mli. Eji fã ko ni tsuɔ nii, shi jeee fã ko kɛkɛ.
Zinc ni akɛwo mli ni yɔɔ ekome, ni mli tse (bluu, ŋmɔŋ, loo mli tse) ji nɔ pɛ ni he hiaa kɛha shĩa mli nitsumɔ.
Kɛji oosumɔ ni okɛtsu nii yɛ kpo nɔ loo yɛ nu mli lɛ, ehe miihia ni okɛ dade ni sɛɛ efooo (304 loo 316 grade) loo nɔ ko ni tsii tamɔ zinc-aluminum flake (tamɔ Geomet loo Dacromet) awo nɔ.
Drive henɔ ni sa
Drive lɛ saa bɔ ni torque lɛ jeɔ odɛŋdade lɛ mli kɛyaa skru lɛ nɔ jogbaŋŋ lɛ he, ni no hu saa oyaiyeli he ni eyeɔ ebuaa ni nɔ ko nɔ ko akafite.
Phillips: afɔɔ namɔ shi efɔɔɔ shwiemɔ loo shwiemɔ kɛji akɛ akɛ torque babaoo tsu nii.
Sqɛɛ / Pozidriv: Ehiɛɔ nii jogbaŋŋ ni ekɛ cam-out faaa fe Phillips tsɔnei.
Torx: torque ni hi fe fɛɛ, cam-out fioo, kɛ wala ni sɛɛ tsɛɔ fe fɛɛ kɛha tsɔne kudɔmɔ nibii. Eji nɔ ni hi fe fɛɛ kɛha nitsumɔ ni biɔ gbee loo torque babaoo.
Yitso He Saji ni Afee lɛ Hiɛ
Yitso lɛ kwɛɔ koni nɔ ni akɛfiɔ nii lɛ atsu enaagbee nitsumɔ, ni ji ni ekɛ nibii ni akɛfiɔ he lɛ afee ekome jogbaŋŋ.
Yitso ni yɔɔ ŋmɔlɔŋmɔlɔ loo ni yɔɔ ŋwɛigbɛ: etaa shi ekɛ nibii lɛ hiɛ feɔ ekome koni efee nɔ ni he tse.
Round/Dome Head: haa naagbee lɛ feɔ fɛo ni ehaa ŋwɛi ni da ni bearing lɛ baanyɛ atsu nii yɛ nɔ.
Washer/Hex Washer Head: Yitso nɛɛ yɛ washer ni mli kwɔ ni jaa jatsu ni tsiɔ nibii ni yɔɔ mlɛo ni akɛgbalaɔ kɛtsɔɔ mli lɛ naa, ni ehaa anyɛɔ akɛ torque babaoo tsuɔ nii kɛ tsɔne ni akɛwoɔ tsɔne mli lɛ.
Kɛtsɔ skru ni hi fe fɛɛ yɛ hei enumɔ nɛɛ amli lɛ nɔ lɛ, okɛ shika woɔ nitsumɔ lɛ mli jogbaŋŋ, anɔkwayeli, kɛ nitsumɔ lɛ he nyɔmɔwoo fɛɛ mli.
-
Gbɛtsɔɔmɔ 1: Halamɔ Skru lɛ Kɛlɛ ni Sa.- Esa akɛ skru lɛ atsɛ bɔ ni sa koni etsɔ ŋwɛi nibii lɛ amli fɛɛ ni enyɛ emɔ shishigbɛ nibii lɛ jogbaŋŋ.
- Skru lɛ Kɛlɛ = Nɔ ni yɔɔ ŋwɛi lɛ mli ŋmɔlɔ + Nifeemɔ ni baa shi fe fɛɛ
- Nifeemɔ ni baa shi fe fɛɛ: Bɔni afee ni anyɛ amɔmɔ tso jogbaŋŋ lɛ, esa akɛ kɛ hoo lɛ, kpãa lɛ abote shishigbɛ nibii lɛ amli kɛyashɛ 1 inch (25mm). Esa akɛ kɛ hoo lɛ, tsɔne ni akɛwoɔ mli lɛ afee 1.5 inches (38mm) kɛha tsɔne ni akɛtswaa tsɔne lɛ.
-
Gbɛtsɔɔmɔ 2: Angle ni Sa Kɛha Nɔ ni Akɛwoɔ Mli- Yɛ be mli ni akɛwoɔ mli lɛ, nɔ ni akɛwoɔ mli lɛ ŋwɛigbɛ lɛ náa hewalɛ ni yɔɔ tsakpaa lɛ kɛ nɔnyɛɛ ni yɔɔ nibii lɛ anɔ lɛ fɛɛ nɔ hewalɛ waa.
- Angle ni akɛwoɔ mli: Taakɛ slant-screw ŋaa lɛ ji lɛ, skru ni akudɔɔ yɛ koŋ nɔ lɛ haa shear tsakpaa hewalɛ yaa hiɛ. Kɛfata he lɛ, angle installation he miihia kɛji akɛ aŋmɛ gbɛ ni akɛyaa ŋwɛi. Angles ni afɔɔ namɔ jeɔ shishi kɛjɛɔ digrii 15 kɛyashiɔ 30.
- Kaadi ni he hia: Kɛji ebaahi lɛ, esa akɛ akɛ nibii ni damɔ shi shiŋŋ lɛ atsu nii klɛŋklɛŋ koni anyɛ atere jatsu babaoo.
-
Ŋaawoo 3: Okɛ odɛŋdadei lɛ ahe gbɛjianɔtoo lɛ atsu nii jogbaŋŋ
- Kɛ́ okɛ gbɛjianɔtoo ni sa ni yɔɔ odɛŋdadei lɛ anɔ lɛ tsu nii lɛ, ehaaa amɛkumɔ ni ehaa amɛhiɔ shi jogbaŋŋ.
- Kɛ drill icon mode (jeee hama) atsu nii kɛha sɛɛtsimɔ hewalɛ ni yaa nɔ daa.
- Oyaiyeli ŋaa: Je shishi blɛoo koni oha he ni okɛ ohe woɔ mli lɛ aba mli ni okpa "nyiɛmɔ." Kɛji eshɛ he ni eyɔɔ lɛ, oya oya kɛyashɛ oyaiyeli fɛɛ he kɛha tsɔne kudɔmɔ oya.
- Kɛtsɔ klatsi ni anyɛɔ atsakeɔ lɛ nɔ lɛ, too lɛ nɔ jogbaŋŋ bɔ ni sa koni ekɛ skru lɛ yitso lɛ awo mli kɛyashɛ he ni sa (flush loo shishi fioo). Enɛ haa mɔ he jɔ̃ɔ ehe kɛ tsɔne kudɔmɔ fe nine. Kɛ torque ni nɔ kwɔ loo impact driver atsu nii kɛha skru ni mli wa waa.
-
Ŋaawoo 4: Kasemɔ be ni esa akɛ okɛ drill atsu nii dani okɛtsu nii- Eyɛ mli akɛ amɛji "self-tapping" moŋ, shi pre-drilling he hiaa waa yɛ shihilɛi komɛi amli koni akafee nɔ ko:
- Be fɛɛ be lɛ, tsɔ hiɛ okɛ tsɔne lɛ atsu nii yɛ he ni bɛŋkɛ tsei lɛ ashishigbɛ loo amɛnaagbee lɛ koni amɛkagbala. Esa akɛ bu ni akɛbaatsu nii yɛ tsɔne kudɔlɔ lɛ mli lɛ afee bibioo fioo fe skru lɛ shishi.
- Tsei ni wa (tamɔ oak kɛ maple): Kɛ́ atsɔ hiɛ atsɔ pilot hole nɔ lɛ, ehaa efeɔ mlɛo akɛ oootsɔ skru lɛ nɔ, ni ehaaa efo.
- Nibii ni yɔɔ mlɛo loo egbɔjɔ: Nɔ ni afeɔ dani atswaa lɛ haaa efo loo efoŋ.
- Skrui ni da (bei pii lɛ >1/4" loo 6mm): Hewalɛ kroko ni he hiaa lɛ baanyɛ aha tso lɛ mli agbala, no hewɔ lɛ, atsɔɔ akɛ afee pilot hole waa.
- Kɛ okɛ gbɛi pɔtɛɛ nɛɛ tsu nii lɛ, ebaaha odɛŋdadei lɛ ahi shi be kakadaŋŋ, ebaaha onibii lɛ ahi shi shweshweeshwe, ni ebaaha onine ashɛ nɔ ni hi jogbaŋŋ nɔ.
| Paramita / Su | Tso Skrui ni Tswaa He | Dade Skrui | Hex/Washer Yitso He-Tapɛi | Skrui ni Akɛwoɔ Mɔ Diɛŋtsɛ | Dade ni Akɛfee He-Tappers |
| Gbɛjianɔtoo Klɛŋklɛŋ | Kpoji ni yɔɔ shɔŋŋ, ni yɔɔ ŋmɔlɔ loo Type-17 point. | Yunifɔm kpãa ni kɛlɛ fɛɛ, kapãa naa naa. | Hex yitso ni washer bɛ mli kɛha tsɔne kudɔmɔ ni yɔɔ hewalɛ waa. | Nibii ni akɛwoɔ mli (tamɔ, TEK 2/3/4) kɛha dade mlibotemɔ. | Skru muu lɛ fɛɛ ni akɛ dade ni ji 304/316 fee. |
| Yitso Style ni afɔɔ namɔ | Flɛt, Kɔɔyɔɔ, Washa. | Flɛt, Kɔɔyɔɔ, Hex. | Hex Washer Yitso titri. | Hex Washer Yitso, Flɛt, Pan. | Henɔi fɛɛ (Flat, Hex, kɛ ekrokomɛi). |
| Core Thread He Saji | Kpãa ni mli kwɔ, ni mli kwɔ kɛha tso ni amɔɔ nii jogbaŋŋ. | Kpãai ni hi, ni bɛŋkɛ amɛhe kpaakpa kɛha dade bibioo. | Fine (dade) loo Coarse (tso), ni hi jogbaŋŋ kɛha torque. | Kpãai kpakpai, kɛ amɛhe woɔ mli amrɔ nɔŋŋ yɛ drill point lɛ sɛɛ. | Nɔ ni damɔ nitsumɔ nɔ (ehi kɛha dade, ehiii kɛha tso). |
| Point He Mfonirifeemɔ | He ni yɔɔ ŋmɔlɔ loo Type-17 (auger) he ni akɛjieɔ ŋmeii. | Sharp needle point kɛha tsɔne ni akɛfoɔ mɔ mli kɛ tsɔne shishijee. | Sharp he loo drili he. | Nibii ni akɛwoɔ mli lɛ, ni ato he gbɛjianɔ kɛha ŋmɔlɔ (tamɔ, TEK 3 kɛha ~3mm dade). | Nitsumɔ-ni damɔ (sharp loo Type-17). |
| Nibii ni akɛtsuɔ nii kɛ naagbee | Kabon dade, Zinc-ni akɛwo mli, phosphated, loo nɔ ni nyɛɔ efiteɔ. | Carbon dade, Zinc-ni akɛwo mli (sui srɔtoi). | Carbon dade ni akɛ Zinc loo nɔ ni tsii woɔ mli (tamɔ, Dacromet). | Kabon dade ni mli wa, ni akɛ zinc ewo mli. | A2-304 loo A4-316 Dade ni bɛ ŋmɔtɔ, ni jɛ fɔmɔ mli lɛ nyɛɔ efiteɔ. |
| Nibii ni Akɛtsuɔ Nii Klɛŋklɛŋ | Tso-kɛ-tso, tso panɛl tsakpaai. | Dade bibioo ni akɛfiɔ he, aluminum. | Tsu lɛ he frem, dade yiteŋ, torque ni nɔ kwɔ ni akɛwoɔ mli. | Dade ni akɛwoɔ mli (dade, aluminium) ni akɛtsuuu nii dani atsuɔ he nii. | Shihilɛi ni fiteɔ nii waa: kpo nɔ, ŋshɔnaa, tsofa. |
| Halamɔ He Gbɛtsɔɔmɔ | Esa akɛ elɛɛmɔ ashɛ shishi tso lɛ he kɛ hoo lɛ 25mm (1"). | Esa akɛ diamita lɛ kɛ dade gaaji lɛ akpã gbee; tsi ohe kɛjɛ torque ni fe nine lɛ he. | Kɛ yitso dalɛ ato tsɔne kudɔmɔ dɛŋdade (wrench/socket). | Halamɔ drill he lɛ dalɛ ni damɔ nibii fɛɛ ni yɔɔ mli lɛ mli. | Tsɔɔmɔ A4-316 kɛha ŋshɔ mli/tsofai ni ajieɔ lɛ kpo. |
| Sɛɛnamɔ Titri | Teɔ shi ewoɔ mligbalamɔ, hewalɛ ni nɔ kwɔ ni ajieɔ kɛjɛɔ mli. | Efeɔ kpãai ni mli wa yɛ dade ni mli tseee mli. | Oya ni akɛwoɔ mli, torque ni nɔ kwɔ, teɔ shi ewoɔ cam-out. | Ejieɔ dani atsuɔ nii, ehaa etsuɔ nii jogbaŋŋ. | Nɔ ni yɔɔ srɔto ni teɔ shi ewoɔ ŋmeii kɛha sɔɔmɔ wala kakadaŋŋ. |
Kpaa tsei ni ekumɔ kɛ tsei ni egbo lɛ ahe nɔmɔ. Drill-point tip ni yɔɔ wɔ self-tapping screws lɛ nɔ lɛ haa amɛtsɔɔ tsei ni akɛ nɔnyɛɛ etsu nii yɛ mli lɛ amli ni ehe ehiaaa ni amɛfo pilot holes klɛŋklɛŋ. Enɛ jieɔ yiŋtoo titri ni haa tsei mli gbalaa yɛ eshishigbɛ lɛ kɛjɛɔ mli. Obaanyɛ ofo be ni heɔ koni akɛ 20-foot fɛ̃i fã ko awo nɔ lɛ nɔ aaafee 40% kɛtsɔ 3.5-inch screws ni okɛbaafata piketii lɛ ahe lɛ nɔ. Kɛtsɔ tsei ni agbalaa kɛyaa ŋwɛi ŋtayaai lɛ anɔ lɛ nɔ lɛ, washer yitso ni akɛwo mli lɛ haa ŋtayaa lɛ nɔ feɔ ŋtayaa ni ŋtayaa ko bɛ he.
Na yibii ni he tse, ni he esa yɛ onitsumɔhe lɛ. Nibii ni hi jogbaŋŋ kɛ wɔ tso nitsumɔ he ŋtayaai ni yɔɔ ŋmɔlɔŋmɔlɔ lɛ afolɔ pɛpɛɛpɛ awo tsei ni wa tamɔ oak kɛ maple mli, ni ehaa hewalɛ ni nɔ kwɔ ni akɛhiɛɔ nii amli ni sɛɛgbɛ lɛ tswaaa. be kɛ 25%.
Yɛ nitsumɔhe ko lɛ, oyaiyeli kɛ hekɛnɔfɔɔ ji nɔ fɛɛ nɔ. Wɔ self-tappers krɛdɛɛi ni shwieɔ kɔnkrit lɛ baanyɛ amɛkɛ 2x4 sleepers lɛ akpɛtɛ kɔnkrit shishigbɛ shikpɔŋ lɛ he yɛ gbɛ kome nɔ. Amɛtsɔɔ tso kɛ dade tsɔne ko ni akɛwoɔ ŋshɔ hiɛ lɛ fɛɛ mli. Enɛ yeɔ gbɛ kakadaŋŋ ni atsɔɔ nɔ akɛ powda tsuɔ nii ni akɛfiɔ nii ahe (PAFs) lɛ najiaŋ. Nitsumɔhe nine lɛ kɛɛ akɛ amɛbaanyɛ amɛkɛ skru kome awo mli daa sɛkɛndii 8 kɛyashi 10, yɛ be mli ni eheɔ sɛkɛndii 20 loo nɔ ni fe nakai kɛha PAFs, ni nɔ ni fata he ji tsɔnei ni akɛwoɔ tsɔne mli lɛ ahe nitsumɔ kɛ tsɔnei ni shwieɔ shi shii abɔ lɛ ahe nitsumɔ. Enɛ baanyɛ ajie gbii ni ato he gbɛjianɔ kɛha nitsumɔ ko ni fe fã kome lɛ.
Nibii ni otswaa lɛ baanyɛ ahi shi afii babaoo yɛ shwane kome pɛ mli. Wɔ skru ni akɛtsuɔ nii yɛ kponɔgbɛ lɛ yɛ nɔ ko ni haaa amɛfee ŋmɔtɔ, kɛ́ amɛyɔɔ shikpɔŋ kɛ ŋmɔtɔ mli be fɛɛ be po. Enɛ tsiɔ ŋmei tsuru ni ŋmei ni akɛtsuɔ nii daa lɛ naa yɛ be kome pɛ mli lɛ naa. Eheɔ ŋtayaai ni fa fe 60 ni akɛfiɔ tsei tsei ahe kɛyaa 4x4 ŋtayaai anɔ koni akɛfee abɔɔ mli saatso ni awó nɔ ni dalɛ ji 4 x 8 ni mli ejaaa.
Nɔkwɛmɔnɔ Gbɛjianɔtoo ni aheee nɔ ko
Nitsumɔ He Nilee He Yelikɛbuamɔ
Shiɛmɔ oya
Nɔmimaa ni kɔɔ Nɔ ni hi He
-
Sanebimɔ: Mɛɛ be esa akɛ mikɛ tso ni akɛwoɔ ehe ni dalɛ ji 3-inch lɛ atsu nii? Ani amɛbaanyɛ amɛye lag bolts lɛ najiaŋ?
-
Sanebimɔ: Mɛni gbɔmɛi kɛ 2- 1/2-inch tso ni akɛtswaa amɛhe lɛ tsuɔ nii fe fɛɛ?
-
Sanebimɔ: Mɛni esa akɛ matao yɛ skru ni baaha dade kɛ tso abɔ he lɛ mli?
-
Sanebimɔ: Mɛni hewɔ ni tsɔnei ni akɛtswaa amɛhe lɛ hi kɛha tsɔnei ni yɔɔ kpo nɔ lɛ?
-
Sanebimɔ: Mɛɛ gbɛ nɔ tso ni akɛwoɔ tsɔne mli ni tswaa ehe lɛ yɛ srɔto yɛ tso ni akɛwoɔ tsɔne mli daa lɛ he?
-
Sanebimɔ: Ani manyɛ mikɛ self-tapping screw ko atsu nii kɛha kotoku mli bu ni akɛwoɔ tsɔne mli lɛ?
-
Sanebimɔ: Ani srɔtofeemɔ ko yɛ ‘skru ni akɛtswaa tso’ kɛ ‘skru ni akɛtswaa tsei diɛŋtsɛ’ teŋ?
-
Sanebimɔ: Te efeɔ tɛŋŋ ni skru yeɔ omanye yɛ tsɔji ni yɔɔ tso ni wa kɛ tso ni yɔɔ mlɛo mli lɛ mli?
TO KNOW MORE ABOUT Sinsun, PLEASE CONTACT US！
We are committed to providing you with the best quality service and look forward to communicating with you to solve problems together and bring you a better experience.
our experts will solve them in no time.