Polikarbonat tsũ yiteŋ ŋtayaai

Panel lɛ mli etseee, polycarbonate ni yɔɔ shiŋŋ.

Seal ni nyɛɛɛ atsɔ mli, damɔ shi shiŋŋ yɛ kɔɔyɔŋ tsakemɔi fɛɛ amli.

Nitsumɔhe lɛ tɛ̃ɛ, ni hi fe fɛɛ kɛha polycarbonate tsũi anɔ.

Sinsun polikarbonɛt ŋwɛi ŋtayaai: Afee kɛha Thermal Nyiɛmɔ kɛ Naasɔomɔi ni Hiɔ Shi Daa

Ani ootao polycarbonate tsũ yiteŋ ŋtayaai kɛjɛ nifeelɔ ko ni anyɛɔ akɛ he fɔ̃ɔ enɔ lɛ dɛŋ? Sinsun kɛ tsɔnei ni akɛtswaa tsɔne ni akɛ EPDM tsuɔ nii kɛfoɔ tsei kɛ dade tsɔnei amli lɛ haa. Kwɛmɔ dalɛ woji, henɔi ni akɛhaa, kɛ jara babaoo.

Na Quote Oya

Sinsun nitsumɔhe lɛ tɛ̃ɛ Polycarbonate ŋwɛi ŋtayaai | Nibii ni akɛfiɔ he ni hi fe fɛɛ

Sinsun ji ŋaalɔ ko ni feɔ tsɔnei ni akɛwoɔ tsũ yiteŋ ni ji polycarbonate ni hi jogbaŋŋ lɛ. Polikarbonat wolo nɔ skru, polikarbonat ŋwɛi ŋtayaai, polikarbonat ŋwɛi ŋtayaai, ŋwɛi ŋtayaai kɛha polikarbonat. Afee nɛkɛ nibii krɛdɛɛi nɛɛ koni amɛkɛ polycarbonate tsɔnei lɛ ahi shi ni amɛkagbala loo amɛkafite nibii lɛ - eji nɔ ko ni mɛi ni tsuɔ nii yɛ tsumalɔi kɛ tsumalɔi amli lɛ fɔɔ nijiaŋwujee kɛji amɛkɛ polycarbonate tsɔnei ni yɔɔ mlɛo miitsu nii. Kɛha blɛoofeemɔ ni yɔɔ paneli lɛ anɔ, ŋmeii ni nyɛɔ efiteɔ, kɛ sɛɛfimɔ ni hiɔ shi be kakadaŋŋ lɛ, afee skru lɛ eko fɛɛ eko pɛpɛɛpɛ koni ekɛ nitsumɔhe lɛ shishitoo mlai ni nɔ kwɔlɔ lɛ akpee.

Sinsun ji nɔ ko krɛdɛɛ ejaakɛ wɔfeɔ polycarbonate ni wɔfeɔ lɛ bɔ ni wɔsumɔɔ. Wɔfeɔ nibii srɔtoi ni fa babaoo ni bastion polycarbonate ŋwɛi ŋtayaai, ŋwɛi ŋtayaai ni akɛ ŋtayaai ebɔ he, ŋtayaai ni akɛwoɔ ŋtayaai ni akɛtswaa ŋtayaa kome kɛ ŋtayaai ni sa fe fɛɛ kɛha ŋtayaai ni akɛwoɔ ŋtayaai amli lɛ fata he. Skru lɛ eko fɛɛ eko kɛ nitsumɔ lɛ taomɔ nii srɔtoi lɛ kpãa gbee. Wɔ skrui lɛ yɛ gbɛjianɔtoo krɛdɛɛ ko ni kɛ ehe wooo mli ni jaa nɔnyɛɛ lɛ mli pɛpɛɛpɛ koni ekɛtsi ehe kɛjɛ panel mli ŋmeii ni generic skrui lɛ kɛbaa lɛ he. Nibii ni afee lɛ eko fɛɛ eko tsɔɔ nitsumɔhe lɛ nɔkwɛmɔ ni mli wa mli koni eha bo nibii ni yaa nɔ daa, ni anyɛɔ akɛ he fɔ̃ɔ nɔ ni akɛfiɔ polycarbonate tsũ yiteŋ kɛ polycarbonate woji ni akɛfiɔ he lɛ.

Na Quote Oya

Wɔ Pneumatic tsũ nɔ tsɔji ni yɔɔ ŋwɛi lɛ

Wɔkɛ polycarbonate ŋwɛitsu nɔ ŋtayaai babaoo haa koni ekɛ polycarbonate ŋwɛitsu nɔ nitsumɔi srɔtoi lɛ akpã gbee, ni afee eko fɛɛ eko koni ekɛtsu nitsumɔhe pɔtɛɛ ko he naagbai ahe nii:

Polycarbonate ni akɛwoɔ tsũ yiteŋ lɛ he tsɔne kome

Enɛ ji nɔ ni akɛtoɔ polycarbonate tsũ yiteŋ. Bei pii lɛ, atsɛɔ nɛkɛ ŋtayaai nɛɛ akɛ One Shot polycarbonate roofing screws ni amɛyɛ 10mm hole cutter ni akɛwoɔ ŋtayaa lɛ mli.Kɛ́ akɛ ŋtayaa lɛ naa lɛ fɔ panel crest lɛ nɔ ni akɛ RPM ni baa shi tsu nii lɛ, akɛ nɔnyɛɛ lɛ tsuɔ nii kɛ RPM ni baa shi. Afoɔ pilot hole awoɔ shishigbɛ lɛ mli ni afee he ko ni abaanyɛ agbɛ ashwã yɛ nakai beaŋ nɔŋŋ. Nɔ ko bɛ ni afeɔ dani atsuɔ nii, nɔ ko bɛ ni atsakeɔ dɛŋdadei, oshara ko bɛ ni baaha ashi bu bibioo tsɔ ni baaha wolo lɛ ajie. Ehi kɛha tsei kɛ dade ni akɛwoɔ shishi lɛ fɛɛ, ni amɛji nɔ ni mɛi ni he esa ni kɛ nibii woɔ mli ni biɔ oyaiyeli kɛ hekɛnɔfɔɔ lɛ sumɔɔ waa.

Kɛ sanebimɔ amaje Amrɔ nɛɛ

Polikarbonat Wolo Skrui

Polycarbonate sheet screws ji tsɔne ko ni akɛfiɔ nii ahe jogbaŋŋ ni afee koni ejie naagbai enyɔ ni afɔɔ naa yɛ plastic tsũi ahe lɛ; hulutsoo nyiɛmɔ kɛ shwiemɔ naatsii. Beni okɛ nɛkɛ tsɔnei nɛɛ tsuɔ nii lɛ, amɛfeɔ 10-11mm clearance hole, no hewɔ lɛ o-panels lɛ etseŋ yɛ fastener lɛ he, etamɔɔɔ dade tsɔnei ni akɛwoɔ tsũ yiteŋ lɛ. Polycarbonate skru kɛha ŋtayaai loo gbogboi babaoo ahe ŋtayaai. Nɔ ni haa mɔ tsui nyɔɔ emli, lá ni hoɔ kɛjɛɔ ŋmɔtɔ mli, mɛi ni tsɛɔ bo sɛɛ beni ohala polycarbonate screw ni sa lɛ bɛ.

Kɛ sanebimɔ amaje Amrɔ nɛɛ

bastion henɔ 17 ni akɛfee tsɔne ni akɛwoɔ tsũ yiteŋ

Bastion Type 17 lɛ ji yiŋtoo ko ni ato he gbɛjianɔ koni akɛfi polycarbonate ŋtayaai ni akɛwoɔ tsei ahe lɛ ahe. Eji tsabaa ni yɔɔ mlɛo kɛha tsũ yiteŋ ni sɛɛ tsɛɔ ni kɔɔyɔŋ tsakemɔi nyɛɔ eshiɔ lɛ. Nɛkɛ skru nɛɛ ji nɔ ni yɔɔ srɔto diɛŋtsɛ yɛ e-Type 17 drill point lɛ hewɔ.E-fluted tip kɛ coarse biting thread lɛ haa efeɔ mlɛo akɛ aaafo tsei amli ni afooo pilot hole. Kɛji akɛ EPDM cupped washer lɛ shwie shi kwraa lɛ, ekɛ wolo lɛ he saji lɛ kpãa gbee jogbaŋŋ kɛji akɛ substrate bite lɛ egbe naa pɛ. Gbɛjianɔtoo lɛ baa yɛ shishijee zinc-coated Class 3 mli kɛha hei ni egbi kɛ ŋmɔlɔ ni mli wa fe tsutsu lɛ mli kɛha hei ni ŋmei efite lɛ, ni ehaa onáa hebuu ni sa kɛha onitsumɔ lɛ.

Kɛ sanebimɔ amaje Amrɔ nɛɛ

ŋtayaai ni akɛwoɔ tsũ yiteŋ ni akɛ polycarbonate fee lɛ

Naagba wulu kome ni yɔɔ plastic ni akɛwoɔ tsũ yiteŋ ni akɛwoɔ tsũ mli lɛ he ji hulutsoo ni yaa hiɛ, no hewɔ lɛ ehe miihia ni oná nɔ ko ni akɛfiɔ he ni kwɛɔ nakai tsũ lɛ nɔ. Akɛ skrui ni yɔɔ ŋmɛnɛ lɛ ŋmɛɔ wolo lɛ shi, ni be mli ni nibii lɛ mli lɛɛɔ ni egbɔjɔɔ lɛ, ekɛ nɔnyɛɛ mli fãji kɛ ŋmɔlɔ baa. Polycarbonate ni akɛwoɔ tsũ yiteŋ lɛ tsuɔ naagba nɛɛ he nii kɛtsɔ tsɔne ni akɛfoɔ bu ni da fe nine, ni ji 11mm kɛha #12 ŋtayaa lɛ nɔ. Afeɔ enɛ yɛ gbɛ ni atsɔɔ nɔ akudɔɔ tsɔne lɛ nɔŋŋ mli. Nɛkɛ ŋwɛi ŋta ni yɔɔ mli nɛɛ haa ŋwɛi ŋta lɛ tsakeɔ ehe kɛyaa hulutsoo be mli ni ekɛ haomɔ haaa nɔ ni akɛfiɔ he lɛ. Nɔ ni jɛɔ mli baa ji ŋwɛitsu ni ŋmɛlɛtswaa bɛ mli ni nu nyɛɛɛ atsɔ mli.

Kɛ sanebimɔ amaje Amrɔ nɛɛ

Kɛtsɔ Coating kɛ Korrosion Hewalɛ nɔ

Nɔ ni Akɛwoɔ Nɔ Henɔ	Koroshin Hetoo	Nitsumɔ ni afɔɔ feemɔ
Elektro‐zinki / Zinki ni akɛwo mli	Mligbɛ/gbi shihilɛ ni sa	Carports ni aha nɔ, shĩa mli atriums, shihilɛi ni mli ejɔ fioo
Klas 3 / Klas 4 ni akɛ dade ni mli edɔ woɔ mli	ŋmɛlɛtswai 500–1,000 ni akɛ ŋmei shwieɔ nɔ	Kpo nɔ tsu yiteŋ, shĩa kɛ okwaayeli
Ruspert nɔ ni akɛwoɔ mli ni ji etɛ	1,000+ ŋmɛlɛtswai ni akɛ ŋmei shwieɔ nɔ	Ŋshɔnaa nibii ni akɛwoɔ ŋmei nu mli kilomitai 10 mli, nitsumɔhei akutsei
304 Dade ni bɛ ŋmɔlɔ	Ehi jogbaŋŋ kɛha ŋshɔnaa kɛ tsofai ni ajieɔ lɛ kpo fioo	Niyenii feemɔ, tsofafeemɔ, mligbɛ ni mli edɔ waa
316 Dade ni bɛ ŋmɔlɔ (Ŋshɔ mli Gbɛjianɔtoo)	Nu ni mli edɔ ni fe fɛɛ ni nyɛɔ eshiɔ	Lɛlɛdaamɔhe tsũi, ŋshɔ hiɛ tsũi, ŋshɔ hiɛ kpojiemɔ tɛ̃ɛ

Sinsun polycarbonate ŋwɛi ŋtayaai ahe saji

Daramɔ	Kɛlɛ He	Point henɔ	Yitso Style	Washer henɔ	Nɔ ni Akɛwoɔ Nɔ	Nɔ ni akɛtsuɔ nii yɛ shishigbɛ
#8-#9	25mm - 45mm (1" - 1-3/4")	Henɔ 17 (naa wa)	Hex Washer	EPDM ni yɔɔ ŋwɛi	Zinc-ni akɛwo mli, Klas 3	Tso he mfoniri, polycarbonate panɛl bibii
#10	38mm - 50mm (1-1/2" - 2")	Nɔ ni akɛfoɔ nii kome / Henɔ 17	Hex Washer / Pan	EPDM ni yɔɔ ŋwɛi / Dome ni akɛwoɔ mli	Klas 4, Ruspert, 304SS	Tso purlins, woji ni akɛ dade ebɔ he
#12	50mm - 75mm (2" - 3")	Nɔ ni akɛfoɔ nii kome / TEK 2–3	Hex Washer	EPDM ni yɔɔ ŋwɛi	Klas 4, Ruspert, 304SS, 316SS	Tso loo dade purlins ni yɔɔ mlɛo
#14	65mm - 100mm (2-1/2" - 4")	TEK 3–4 (he-tsɔmɔ)	Hex Washer	EPDM ni yɔɔ ŋwɛi	Ruspert, 316SS	Dade purlins ni tsii, tsɔne he mfonirifeemɔ
M4.8 (milimita ejwɛ kɛ kpaanyɔ)	milimitai enyɔ kɛ enumɔ – milimita oha	Nɔ ni akɛfoɔ nii kome / Henɔ 17	Hex Washer	EPDM ni yɔɔ ŋwɛi	Klas ni ji ejwɛ, ni ji Ruspert	Polikarbonat kɛ tso loo dade
M5.5 (5.5mm)	50mm – 150mm	TEK 3 / Nɔ ni akɛfoɔ nii kome	Hex Washer	EPDM ni yɔɔ ŋwɛi	Klas 4, Ruspert, 304SS	Jarayeli polycarbonate tsũ yiteŋ, ehe saji ni mli tse

Teknik Paramitai

Nibii: C1022A carbon dade (ni mli wa) | A2/A4 dade ni bɛ ŋmɔlɔ (304/316)

Kasemɔ Pii

Drill he lɛ nyɛmɔ

(tso), TEK 2–3 (0.9–3.0mm dade), tsɔne ni akɛfoɔ nii kome (polycarbonate pɛ).

Ekspansion hole tsɔne

10mm diameter ni akɛfoɔ yitso ni akɛwo mli lɛ, jieɔ bu ni mli tse yɛ tsɔne kudɔmɔ be mli.

Washer ni akɛfiɔ nii ahe

EPDM rɔbɔt ni yɔɔ ŋwɛi, UV‐hiɛɛɛ shi, ni nyɛɔ etsakeɔ kɛjɛɔ -40°C kɛyashi +120°C.

Nɔ ni akɛwoɔ nɔ lɛ mli ŋmɔlɔ

Elektro-zinki (5μm), Klas 4 ni akɛwoɔ la mli (8μm+), Ruspert ni ji etɛ (ŋmɛlɛtswai 1,000+ ŋmei ni akɛshwieɔ nɔ).

Driver kɛ ehe kpãa gbee

5/16′′ hex shank, hex tsɔne kudɔlɔ ni haa mɔ tsui nyɔɔ emli.

Nibii ni akɛwoɔ kotoku mli

Adeka babaoo (50-200 pcs), nitsumɔ he nine (100-500 pcs), nitsumɔhe adekai

Nibii ni Akɛtsuɔ Nii Kɛhaa Polycarbonate Skrui ni Akɛwoɔ Tsu He

1. Shihilɛhe ni Akɛ Polycarbonate Woɔ Shia

Wɔ polycarbonate ŋwɛi ŋtayaai lɛ hi kɛha shĩa mli nitsumɔi tamɔ ŋtayaai, kpokui kɛ ŋtayaai bibii. Amɛkɛ polycarbonate woji lɛ fĩɔ tso loo dade ni akɛwoɔ tsɔne mli lɛ he ni etseee, ni eji sane ko ni afɔɔ naa yɛ tsɔnei ni akɛwoɔ tsɔne mli lɛ ahe. Shiatsɛmɛi kɛ DIYers heɔ wɔ skru ni hi jogbaŋŋ kɛha polycarbonate tsũ yiteŋ lɛ amɛyeɔ yɛ bɔ ni amɛwoɔ mli mlɛo kɛ bɔ ni amɛhaa nu shwieɔ shi lɛ hewɔ. Wɔ gbɛjianɔtoo krɛdɛɛ lɛ haa polycarbonate woji ni akɛwoɔ tsɔne mli lɛ feɔ mlɛo, ni ehaa be kɛ shika baa shi yɛ tsɔnei ni akɛtsakeɔ panel lɛ ahe.

Na Quutes Oya

Shihilɛhe ni akɛ polycarbonate fee lɛ yiteŋ

Jarayeli Greenhouses kɛ Okwaayeli He Gbɛjianɔtoi

2. Jarayeli Greenhouses & Okwaayeli He Gbɛjianɔtoi

Nibii ni akɛwoɔ ŋwɛi ŋtayaai amli lɛ sa kɛha nitsumɔ yɛ okwaayeli hei kɛ jarayeli ŋtayaai amli. Esa akɛ ŋtayaai nɛɛ afee nɔ ni sa jogbaŋŋ. Akɛni nɛkɛ ŋtayaai nɛɛ hiɔ shi be kakadaŋŋ ni eyeɔ ebuaa ni akɛwoɔ mli oya hewɔ lɛ, mɛi ni tsuɔ nii yɛ jɛmɛ lɛ sumɔɔ amɛ waa kɛha nitsumɔi ni kɔɔ ŋtayaai ahe.

Na Quote Oya

3. Nitsumɔhei kɛ Jarayeli Hei Ahe Nitsumɔhei

Bastion polycarbonate ŋwɛi ŋtayaai kɛ ŋwɛi ŋtayaai ni akɛtsuɔ nii shikome lɛ ji kɛha nitsumɔhei kɛ jarayeli ŋwɛi ŋtayaai ni tsuɔ nii waa. Akɛ polycarbonate ni mli tse fĩɔ dade purlins lɛ ahe, ni no teɔ shi ewoɔ kɔɔyɔɔ ni woɔ mɔ nɔ kɛ shikpɔŋhosomɔ. Nɛkɛ polycarbonate tsɔnei ni akɛfiɔ tsũ yiteŋ nɛɛ ahe tsɔnei ni awo mli hewalɛ lɛ tsiɔ tsɔnei ni hoɔ babaoo loo nitsumɔ hei ni mli wa po amli lɛ naa. Wɔ feɔ skru nɛɛ wɔ diɛŋtsɛ wɔ kɛha jarayeli tsũi wuji, nitoohei kɛ nitsumɔhei.

Na Quote Oya

4. DIY & Nitsumɔi Bibii

Polycarbonate sheet screws lɛ hi kɛha Do-It-Yourself nitsumɔi tamɔ abɔɔ mli tsũi, tsɔnei ahe tsũi kɛ samflɛi amli tsũi. Nɔ ni yɔɔ ŋmɔlɔŋmɔlɔ kɛ tsɔne ni akɛfɔɔ nii ahe lɛ buɔ polycarbonate woji ni yɔɔ mlɛo lɛ ahe kɛjɛɔ fitemɔ he, ni ehi kɛha mɛi ni jeɔ shishi lɛ. Nɔkwɛmɔnii ni akɛtswaa shikome lɛ ni akɛwoɔ mli lɛ biɔ ni atsu he nii dani atsu he nii, ni nibii ni akɛtsuɔ nii daa lɛ pɛ ji nɔ ni he hiaa. Skrui nɛɛ haa efeɔ mlɛo akɛ aaawo polycarbonate tsũ yiteŋ. Mɛi sumɔɔ amɛ waa ejaakɛ amɛhe jara waaa ni anyɛɔ akɛ he fɔ̃ɔ amɛnɔ kɛha nitsumɔi bibii.

Na Quote Oya

Gbɛtsɔɔmɔ ni kɔɔ bɔ ni akɛwoɔ mli kɛ halamɔ he

Halamɔ ni Sa Kɛha O-Polycarbonate Panel lɛ

Skru lɛ sɛɛtsɛmɔ ni he hiaa lɛ damɔ panɛl ni akɛfee ŋtayaa lɛ nɔ kɛ shishigbɛ ni boteɔ mli lɛ mlilɛɛmɔ nɔ. Kɛha polycarbonate panɛl ni yɔɔ 18mm–25mm lɛ, kɛ polycarbonate ŋwɛi ŋta ni kɛlɛ shɛɔ ŋwɛi ŋta ni kɛ hoo lɛ 25mm boteɔ tso lɛ mli lɛ atsu nii. Afeɔ enɛ kɛtsɔɔ kpãai etɛ ni eyi obɔ ni akɛwoɔ dade lɛ mli lɛ nɔ.
Fomula: Skru lɛ kɛlɛ = Panel lɛ yiteŋ lɛlɛ + Shishigbɛ botemɔ hegbɛ (tso: 25mm, dade: 3 thread pitches). Kɛ akɛ 50mm skru tsu nii yɛ tso purlin ni ŋwɛi ŋta ni ji 20mm lɛ nɔ lɛ, shweshweeshwe sɛɛgbɛ ni ji 20mm + 30mm yɛ.

Gbɛi ni atsɔɔ nɔ akɛ Polycarbonate Wolo Skrui lɛ Woɔ Mli

Gbɛ 1

Okɛ polycarbonate panel lɛ awo tsũ lɛ yiteŋ ni UV-hebuu sini lɛ fã lɛ akwɛ ŋwɛi.
Gbɛ 2

Too ŋtayaai lɛ ahe gbɛjianɔ bɔni afee ni ŋtayaai ni akɛ ŋtayaai fee lɛ ahi ŋtayaai lɛ anɔ jogbaŋŋ.
Gbɛ 3

Okɛ skru lɛ yitso lɛ awo ŋwɛi ŋta ko nɔ ni ekɛ ŋta lɛ hiɛ afee ekome.
Gbɛ 4

Ha drili lɛ aya oyaiyeli ni baa shi (kɛyaa 1,800–2,000 RPM). Nɔ ni akɛfoɔ nii lɛ miitswa oya fe tsutsu lɛ.
Gbɛ 5

Okɛ nɔnyɛɛ fioo awo hiɛ. Ni mɔ ni shwieɔ nii lɛ baashɛ wolo lɛ he ni efee 10mm mlilɛɛmɔ bu.
Nɔ ni ji 6

Mɔ ni foɔ nii lɛ jieɔ wolo lɛ mli ni skru lɛ kpãai lɛ kɛ shishigbɛ tsɔne lɛ kpãa gbee. Kudɔ tsɔne lɛ kɛyashi obaashɛ panel lɛ yiteŋ kɛ EPDM washer ni yɔɔ ŋwɛigbɛ lɛ he ni ona bɔ ni etswaa lɛ.
Gbɛ 7

Kpaa foidamɔ beni tsɔne ni akɛfɔɔ nii ahe lɛ etsɔ ŋmɔlɔŋmɔlɔ fioo yɛ kponɔgbɛ ŋshɔ lɛ naa shi AKƐƐƐ eshi kɛho yitso lɛ ŋshɔ lɛ he.

Gbɛtsɔɔmɔi ni kɔɔ ŋwɛi ŋtayaai ahe kɛha Polycarbonate

Gbɛ ni ato he gbɛjianɔ kɛha polycarbonate tsu yiteŋ panɛl fimɔ:

He ni Panel lɛ yɔɔ	Skru Gbɛ
Yɛ panɛl lɛ sɛɛ kɛ sɛɛkuu	150-300mm (inchi 6-12)
Mligbɛ ŋmɔ mli hei (kɛjɛ naa)	300-600mm (inchi 12-24)
Eaves, ŋwɛi ŋta, kɛ gable naagbee	150mm (inchi 6) ni fe fɛɛ
Klɛŋklɛŋ kɛ naagbee purlins	Kpɛtɛ ŋtayaa fɛɛ ŋtayaa he

Nihɔɔlɔi Hetoo diɛŋtsɛ

"Wɔkɛ Sinsun tsɔne ni akɛwoɔ ŋwɛitsu nɔ lɛ tsuɔ nii yɛ jarayeli tsũi fɛɛ ni amaa lɛ amli. Washers ni ebɔle ehe lɛ ji nɔ ni hi jogbaŋŋ kɛha tsɔnei ni akɛwoɔ ŋwɛitsu lɛ nɔ lɛ ni efeɔ nɔ ko ni nu nyɛŋ abote mli ni nyɛɔ edamɔ wɔ nugbɔshiimɔ afii lɛ anaa. ma 5,000m2 greenhouse kɛ nɛkɛ skrui nɛɛ ni paneli lɛ eko kwraa etseee “Sinsun nitsumɔhe lɛ jara ni awoɔ tɛ̃ɛ lɛ yeɔ ebuaa wɔ ni wɔhiɔ shi yɛ akaŋshii mli, wɔ hu.”

Mɔ ni tsuɔ nii yɛ ŋmɔ mli ni jɛ South Africa

“Kɛha nitsumɔhei polycarbonate tsũi anɔ lɛ, wɔkɛ Sinsun Bastion polycarbonate tsũi anɔ ŋtayaai tsuɔ nii. Wɔmiitao nibii ni akɛfiɔ gbogboi babaoo ni mli wa lɛ ahe kɛyaa dade purlins nɔ, ni enɛɛmɛi tsu nitsumɔ lɛ. afii.Quality nɔkwɛmɔ ji nɔ ni nɔ kwɔ fe fɛɛ yɛ nitsumɔhe lɛ Batch fɛɛ batch ji ekome.

Nitsumɔhe Tsumalɔ ni jɛ Germany

“Wɔji DIY nihɔɔlɔ, no hewɔ lɛ wɔyɛ Sinsun polycarbonate sheet screws kɛ screws ni hi fe fɛɛ kɛha polycarbonate ŋwɛi ŋtayaai – amɛji wɔ jarayelɔi ni ehe gbɛi fe fɛɛ. “Wɔmiiná famɔi ni afɔɔ feemɔ nyɔŋ fɛɛ nyɔŋ nɔ ni Sinsun nitsumɔhe lɛ yelikɛbuamɔ lɛ hi waa – kusum naa dalɛi baa oya be mli ni ehe hiaa wɔ lɛ.”

DIY nihɔɔlɔ kɛjɛ Canada

Sanebimɔi ni Abiɔ Be Fɛɛ Be (FAQ)

Sanebimɔ: Mɛni atsɛɔ polycarbonate ŋwɛi ŋtayaai yɛ nitsumɔhe lɛ?

A: Amɛyaa kɛ gbɛi srɔtoi: ŋtayaai ni akɛfee ŋtayaai, ŋtayaai ni akɛfiɔ ŋtayaai ahe, ŋtayaai ni akɛfiɔ ŋtayaai ahe, ŋtayaai ni akɛfiɔ ŋtayaai ahe, loo ŋtayaai kɛkɛ. Nibii komɛi hiɛ jarayeli gbɛi tamɔ One Shot polycarbonate ŋwɛi ŋtayaai loo Vortex Polycut ŋtayaai.

Sanebimɔ: Mɛni ji skruu ni hi fe fɛɛ kɛha polycarbonate ŋwɛitsu?

A: Skrui ni hi fe fɛɛ kɛha polycarbonate ŋwɛitsu lɛ kɛ nibii etɛ feɔ ekome: 10mm bu ni akɛfee ekome kɛha hulutsoo mlilɛɛmɔ, domed EPDM sealing washer ni tsiɔ nu ni hoɔ lɛ naa, kɛ nɔ ni nyɛɔ efiteɔ ni kɛ shihilɛ ni yɔɔ jɛmɛ lɛ kpãa gbee (Class 4, Ruspertless steel, loo sta).

Sanebimɔ: Ani manyɛ mikɛ dade ni akɛwoɔ tsũ yiteŋ ni akɛtsuɔ nii kɛhaa polycarbonate lɛ atsu nii?

A: Jeee akɛ oshara bɛ mli. Dade ni akɛwoɔ tsũ yiteŋ lɛ bɛ nɔ ni akɛfoɔ ŋwɛitsu lɛ mli, no hewɔ lɛ, bu ni amɛfeɔ lɛ mli wa tsɔ kɛha polycarbonate lɛ hulutsoo nyiɛmɔ. Nakai ŋmɛlɛtswaa lɛ haa fãa, efoɔ, loo fastener lɛ gbalaa kɛtsɔɔ mli yɛ bei fioo komɛi amli. Be fɛɛ be lɛ, okɛ polycarbonate ŋwɛi ŋta ni ajɔɔ nɔ aha lɛ atsu nii.

Sanebimɔ: Ani ehe miihia ni matsɔ hiɛ mafo bu kɛha polycarbonate ŋwɛi ŋtayaai?

A: Kɛ polycarbonate ŋwɛi ŋtayaai ni akɛwoɔ ŋwɛi ŋtayaa kome mli lɛ, daabi. 10mm hole cutter ni akɛwo mli ni haa ŋwɛi ŋtayaa ni he hiaa lɛ baa yɛ tsɔne kudɔmɔ be mli lɛ fata skru lɛ he. 10mm bit ni akɛ polycarbonate sheet screws tsuɔ nii yɛ mli lɛ biɔ ni akɛ 10mm bit atsu nii dani atsu he nii, shi wɔkɛ nakai gbɛ lɛ haaa kɛha nibii heei ni akɛwoɔ mli lɛ.

Sanebimɔ: Mɛɛ skru dalɛ he hiaa mi kɛha 4mm polycarbonate?

A: Kɛha 4mm polycarbonate woji ni yɔɔ tsei ahe lɛ, #9 loo #10 skru ni kɛlɛ ji 25mm–38mm lɛ sa. Elɛɛmɔ pɔtɛɛ lɛ damɔ o-crest lɛ nɔ kɛ purlin lɛ mlibotemɔ nɔ. Wɔ 38mm one‐shot screws lɛ haa shĩa nitsumɔi babaoo nɔ.

Sanebimɔ: Mɛni ji srɔtofeemɔ ni yɔɔ Bastion polycarbonate ŋwɛi ŋtayaai kɛ Sinsun teŋ?

A: Enyɔ lɛ fɛɛ tsuɔ nitsumɔ kome he nii—polycarbonate wolo ni akɛkpɛtɛɔ he. Bastion ji nɔ ko ni ale waa yɛ Australia jarayelihe lɛ. Sinsun kɛ nɔ ni hi jogbaŋŋ ni akɛtoɔ nitsumɔhe lɛ jara tɛ̃ɛ, tsɔnei ni akɛfoɔ nii ni akɛfee ekome, kɛ Ruspert loo dade ni akɛwoɔ mli lɛ haa. Wɔ kɛ wɔ yeɔ akaŋ yɛ nɔ ni yaa nɔ daa, jara, kɛ nyɛmɔ ni wɔyɔɔ ni wɔɔfee nɔ ni wɔsumɔɔ kɛha nibii babaoo ni abiɔ lɛ.

Sanebimɔ: Ani tsɔnei ni akɛwoɔ tsũ yiteŋ ni akɛwoɔ tsɔne mli lɛ kɛ tsɔnei ni akɛwoɔ tsũ yiteŋ lɛ fɛɛ kpãa gbee?

A: Nibii ni akɛwoɔ tsɔne mli ni akɛwoɔ tsɔne mli lɛ—tamɔ ROMA, GRECA, Timdek, kɛ Beehive—kɛ tsɔne ni akɛwoɔ tsɔne mli ni akɛwoɔ tsɔne mli lɛ tsuɔ nii. Multiwall panels baanyɛ abi washers wuji (1′′ diameter) kɛ sɛɛgbɛ srɔtoi. Ma nɔ mi akɛ oprofail lɛ kɛ onihɔɔlɔ lɛ kpãa gbee dani obi.

Sanebimɔ: Mɛni ji shweremɔ bu lɛ dalɛ kɛha polycarbonate ŋtayaai?

A: Yɛ ŋaa gbɛ nɔ lɛ, hɛɛ, shi kaafee nakai. Galvanic hewalɛi srɔtoi baanyɛ aha ŋmeii ni akɛkpeɔ lɛ aba. Kpɛtɛ grade kome he yɛ ŋwɛitsu fɛɛ ŋwɛitsu nɔ.

Sanebimɔ: Mɛɛ nɔ ni hi fe fɛɛ kɛha polycarbonate skrui ni bɛŋkɛ ŋshɔ lɛ?

A: Kɛha ŋshɔnaa nibii ni akɛwoɔ ŋshɔnaa ni kɛ ŋmei nu lɛ teŋ jɛkɛmɔ ji kilomitai 10 lɛ, atsɔɔ akɛ akɛ Ruspert triple‐layer coating loo 304 dade ni bɛ ŋmɔlɔ awo mli. Kɛha ŋshɔ mli nibii ni ajieɔ lɛ kpo tɛ̃ɛ loo chloride ni fa babaoo lɛ, ha aya hiɛ kɛya 316 dade ni bɛ ŋmɔlɔ nɔ.

Sanebimɔ 10

Sanebimɔ: Te EPDM tsɔnei ni akɛfɔɔ nii ahe lɛ yeɔ ebuaa polycarbonate tsɔnei ni akɛfiɔ ŋwɛitsu lɛ he lɛ ehaa tɛŋŋ?

A: EPDM washer ni yɔɔ dome lɛ mli lɛ tsiɔ ehe kɛyaa polycarbonate crest lɛ nɔ beni okɛ skru lɛ kudɔɔ lɛ, ni ehaa nu nyɛɛɛ abote mli ni ebɔleɔ he ni eboteɔ mli lɛ he. EPDM lɛ yaa nɔ ehiɔ shi yɛ hulutsoo be mli ni eteɔ shi ewoɔ UV fitemɔ, etamɔɔɔ neoprene loo foam washers ni jara waaa lɛ.

Sanebimɔ 11

Sanebimɔ: Ani manyɛ mikɛ polycarbonate tsɔne ni akɛwoɔ PVC tsɔne mli lɛ atsu nii?

A: Hɛɛ, shi tsakemɔ ogbɛjianɔtoo lɛ. PVC lɛ shwieɔ shi fe polycarbonate ni egbɛɔ oya yɛ nɔnyɛɛ shishi. Kɛ tsɔne ni akɛfoɔ tsɔne lɛ mli lɛ nɔŋŋ atsu nii, kudɔ tsɔne lɛ yɛ RPM ni baa shi po nɔ, ni okwɛ jogbaŋŋ titri ni okɛ tsɔne ni akɛfɔɔ nii lɛ akatswa tsɔne lɛ fe nine.

Sanebimɔ12

Sanebimɔ: Polycarbonate ŋwɛi ŋtayaai enyiɛ he hiaa mi yɛ sqɛɛ mita kome mli?

A: Kɛha ŋwɛi ŋta ni yɔɔ 900mm purlin sɛɛjɛkɛmɔ lɛ, bu aaafee ŋtayaai 9 he akɔntaa yɛ sqɛɛ mita kome mli. Yɛ 600mm teŋ jɛkɛmɔ, aaafee 14 skrui yɛ sqɛɛ mita kome mli. Be fɛɛ be lɛ, okɛ 10% kroko afata he kɛha jwɛi kɛ sɛɛkuu tsakemɔi.

Sanebimɔ 13

Sanebimɔ: Ani polycarbonate tsũ yiteŋ tsɔnei ni akɛtswaa tsɔne loo tsɔne kudɔlɔ fataa he?

A: Skrui kɛ washers pɛ fata adekai babaoo ni akɛwoɔ mli lɛ ahe. Wɔkɛɔ akɛ akɛ magnetic 5/16′′ hex tsɔne kudɔmɔ bit ni yɔɔ ŋwɛi‐stop kɔla atsu nii kɛha shitaramɔ mlibotemɔ ni yaa nɔ daa. Wɔbaanyɛ wɔkɛ tsɔne kudɔmɔ nibii aha akɛ nitsumɔhe ko nibii ni abiɔ lɛ fã.

Sanebimɔ 14

Sanebimɔ: Mɛni hewɔ mi-polycarbonate ŋtayaai lɛ miigba ŋtayaai lɛ amli lɛ?

A: Nɔ ni fɔɔ baa ji skruu ni akɛ tsɔne ni akɛfoɔ mli lɛ fataaa he lɛ ni akɛtsuɔ nii, nibii ni akɛfiɔ he lɛ ni akɛwoɔ mli fe nine kɛyashiɔ be mli ni panel lɛ shwieɔ shi, loo skruu ni akɛkudɔɔ be mli ni nɔ ni buɔ mɔ he lɛ kã panel lɛ nɔ lolo lɛ. Jiemɔ sini lɛ dani okɛwo mli, okɛ tsɔne ni akɛtswaa tsɔne kome pɛ atsu nii, ni okpa tsɔne kudɔmɔ beni EPDM washer lɛ jeɔ shishi efoɔ kɛkɛ lɛ.

Ani ofee klalo akɛ obaakwɛ o-polycarbonate tsũ yiteŋ nibii ni akɛhaa lɛ anɔ?

Kɛji oyɛ jarayeli ŋmɔ, shĩa kpoku nɔ nitsumɔ, loo nitoohe ni ajaa lɛ, wɔkɛ nibii ni hi jogbaŋŋ haa yɛ nitsumɔhe lɛ jara nɔ. Wɔ polycarbonate tsũ yiteŋ ŋtayaai ni akɛtsuɔ nii shikome lɛ jieɔ ŋtayaai ni akɛtsuɔ nii dani atswaa ŋtayaai lɛ, etsĩɔ hulutsoo ŋtayaai anaa, ni ehaa ŋtayaai lɛ feɔ shiŋŋ afii nyɔŋmai abɔ. Kɛ ohe saji lɛ amaje mi, ni mikɛ shika babaoo ni fe nɔ fɛɛ nɔ ni mɔ ni kɛ nibii haa bo amrɔ nɛɛ kɛhaa lɛ baafee ekome.

Na Quote Oya

Keep In Touch

TO KNOW MORE ABOUT Sinsun, PLEASE CONTACT US！

We are committed to providing you with the best quality service and look forward to communicating with you to solve problems together and bring you a better experience.

our experts will solve them in no time.

Rivets ni yɔɔ Sui

Su ni miiho? Jeee kɛ wɔ tsɔne ni ashã ni sɛɛ tsɛɔ lɛ.
Kpaa rivets ni yɔɔ ŋmɔlɔŋmɔlɔ ni yɔɔ ŋmɔlɔŋmɔlɔ lɛ ahe nitsumɔ. Ekɛ ehe kpãa gbee pɛpɛɛpɛ.
Nitsumɔhe hewalɛ. Designer naagbee. Rivets ni yɔɔ kɔla ni akɛtoɔ he kome.

Polikarbonat tsũ yiteŋ ŋtayaai

Polikarbonat tsũ yiteŋ ŋtayaai

Sinsun polikarbonɛt ŋwɛi ŋtayaai: Afee kɛha Thermal Nyiɛmɔ kɛ Naasɔomɔi ni Hiɔ Shi Daa

Sinsun nitsumɔhe lɛ tɛ̃ɛ Polycarbonate ŋwɛi ŋtayaai | Nibii ni akɛfiɔ he ni hi fe fɛɛ

Wɔ Pneumatic tsũ nɔ tsɔji ni yɔɔ ŋwɛi lɛ

Polycarbonate ni akɛwoɔ tsũ yiteŋ lɛ he tsɔne kome

Polikarbonat Wolo Skrui

bastion henɔ 17 ni akɛfee tsɔne ni akɛwoɔ tsũ yiteŋ

ŋtayaai ni akɛwoɔ tsũ yiteŋ ni akɛ polycarbonate fee lɛ

Kɛtsɔ Coating kɛ Korrosion Hewalɛ nɔ

Sinsun polycarbonate ŋwɛi ŋtayaai ahe saji

Teknik Paramitai

Nibii ni Akɛtsuɔ Nii Kɛhaa Polycarbonate Skrui ni Akɛwoɔ Tsu He

1. Shihilɛhe ni Akɛ Polycarbonate Woɔ Shia

2. Jarayeli Greenhouses & Okwaayeli He Gbɛjianɔtoi

3. Nitsumɔhei kɛ Jarayeli Hei Ahe Nitsumɔhei

4. DIY & Nitsumɔi Bibii

Gbɛtsɔɔmɔ ni kɔɔ bɔ ni akɛwoɔ mli kɛ halamɔ he

Halamɔ ni Sa Kɛha O-Polycarbonate Panel lɛ

Gbɛi ni atsɔɔ nɔ akɛ Polycarbonate Wolo Skrui lɛ Woɔ Mli

Gbɛ 1

Gbɛ 2

Gbɛ 3

Gbɛ 4

Gbɛ 5

Nɔ ni ji 6

Gbɛ 7

Gbɛtsɔɔmɔi ni kɔɔ ŋwɛi ŋtayaai ahe kɛha Polycarbonate

Nihɔɔlɔi Hetoo diɛŋtsɛ

Sanebimɔi ni Abiɔ Be Fɛɛ Be (FAQ)

Sanebimɔ: Mɛni atsɛɔ polycarbonate ŋwɛi ŋtayaai yɛ nitsumɔhe lɛ?

Sanebimɔ: Mɛni ji skruu ni hi fe fɛɛ kɛha polycarbonate ŋwɛitsu?

Sanebimɔ: Ani manyɛ mikɛ dade ni akɛwoɔ tsũ yiteŋ ni akɛtsuɔ nii kɛhaa polycarbonate lɛ atsu nii?

Sanebimɔ: Ani ehe miihia ni matsɔ hiɛ mafo bu kɛha polycarbonate ŋwɛi ŋtayaai?

Sanebimɔ: Mɛɛ skru dalɛ he hiaa mi kɛha 4mm polycarbonate?

Sanebimɔ: Mɛni ji srɔtofeemɔ ni yɔɔ Bastion polycarbonate ŋwɛi ŋtayaai kɛ Sinsun teŋ?

Sanebimɔ: Ani tsɔnei ni akɛwoɔ tsũ yiteŋ ni akɛwoɔ tsɔne mli lɛ kɛ tsɔnei ni akɛwoɔ tsũ yiteŋ lɛ fɛɛ kpãa gbee?

Sanebimɔ: Mɛni ji shweremɔ bu lɛ dalɛ kɛha polycarbonate ŋtayaai?

Sanebimɔ: Mɛɛ nɔ ni hi fe fɛɛ kɛha polycarbonate skrui ni bɛŋkɛ ŋshɔ lɛ?

Sanebimɔ: Te EPDM tsɔnei ni akɛfɔɔ nii ahe lɛ yeɔ ebuaa polycarbonate tsɔnei ni akɛfiɔ ŋwɛitsu lɛ he lɛ ehaa tɛŋŋ?

Sanebimɔ: Ani manyɛ mikɛ polycarbonate tsɔne ni akɛwoɔ PVC tsɔne mli lɛ atsu nii?

Sanebimɔ: Polycarbonate ŋwɛi ŋtayaai enyiɛ he hiaa mi yɛ sqɛɛ mita kome mli?

Sanebimɔ: Ani polycarbonate tsũ yiteŋ tsɔnei ni akɛtswaa tsɔne loo tsɔne kudɔlɔ fataa he?

Sanebimɔ: Mɛni hewɔ mi-polycarbonate ŋtayaai lɛ miigba ŋtayaai lɛ amli lɛ?

Ani ofee klalo akɛ obaakwɛ o-polycarbonate tsũ yiteŋ nibii ni akɛhaa lɛ anɔ?

TO KNOW MORE ABOUT Sinsun, PLEASE CONTACT US！

Rivets ni yɔɔ Sui

Rivets ni yɔɔ Sui

Rivets ni yɔɔ Sui