Nuts kɛ Bolts
Nuts ni yɔɔ mlɛo? O weak link ɔ ngɛ biɛ.
Sinsun ŋmeii lɛ tsiɔ gbee ni hosoɔ lɛ naa.
Kaaha Ohe Wa Kɛkɛ, Shweshweeshwe.
Afee wɔ ŋmeii lɛ koni amɛhi shi.
Nɔ ni Sa lɛ He Hiaa.
Sinsun nuts lɛ ji nɔ ni akɛtoɔ he pɛpɛɛpɛ kɛha emuuyeli, ni yɔɔ shweshweeshwe.
Ohe ni Yeɔ Emuu: Sinsun Nuts ni Afee Kɛha Kanemɔi ni Anyɛɛɛ Akpokpo
Nut lɛ ji nɔ ni haa bolt ni akɛwo mli lɛ fɛɛ feɔ ekome. Sinsun feɔ ŋmeii ni afee lɛ pɛpɛɛpɛ lɛ fɛɛ, kɛjɛ hex kɛ lock ŋmeii ni afɔɔ nitsumɔ lɛ anɔ kɛyashi flange kɛ dome ŋmeii pɔtɛɛi anɔ. Afee ŋmeii nɛɛ fɛɛ koni amɛkɛ wɔ bolts lɛ akpã gbee jogbaŋŋ ni amɛshɛ nitsumɔhei lɛ ashishitoo mlai ahe. Taomɔ bɔ ni wɔhe ni wɔjɔɔ wɔha nibii ni hi jogbaŋŋ, tsɔne ni akɛwoɔ mli daa, kɛ tsɔnei ni akɛwoɔ mli ni yaa hiɛ lɛ haa okpeei ni he hiaa lɛ nyɛɔ amɛhosoɔ, amɛfiteee, ni amɛbaahi shi yɛ be ni sa mli.
Na Quote Oya
Nitsumɔhei-Grɛd Nuts kɛ Bolts
Afee wɔ nuts kɛ bolts lɛ koni amɛtsu nii yɛ nibii srɔtoi amli—kɛjɛ ŋshɔ hiɛ tsɔnei ni yɔɔ shiŋŋ lɛ amamɔ nɔ kɛyashi nitsumɔhei nibii asaamɔ nɔ. Dade ni akɛfee lɛ ni he wa waa lɛ nyɛɔ edamɔɔ nɔnyɛɛ ni tsii naa, yɛ be mli ni nɔ ni akɛwoɔ mli ni nyɛɔ efiteɔ lɛ haa sɛɛfimɔ shihilɛ yaa hiɛ. Eyɛ mlɛo akɛ akɛ nibii ni akɛtsuɔ nii ni akɛtsuɔ nii daa lɛ baawo mli, nɛkɛ nibii ni akɛfiɔ nii ahe nɛɛ feɔ fãji ni mli wa ni teɔ shi ewoɔ ŋmɔlɔŋmɔlɔ yɛ be mli ni be hoɔ lɛ.
Nut dalɛ (mɛtrik) | Thread Pitch | Klɛɛmɔ yɛ Flɛtii lɛ Amli | Etsilɛ | Nibii Grade (Nibii Klas) | Odaseyeli Jatsu (Min.) | Nɔ ni akɛwo nɔ (Standard) | Nɔkwɛmɔnii ni Akɛtsuɔ Nii Klɛŋklɛŋ |
M6 | mm 1.0 | 10 mm | milimita 5.2 | Klas 8.8 (Klas 8) | 17,050 lbf (75.9 kN) | Zinc ni akɛwo mli, 5-8 μm | Tsɔnei ni waaa, tsɔne mli nibii, srawa hewalɛ adekai. |
M8 | mm 1.25 | milimita 13 | milimita 6.8 | Klas 8.8 (Klas 8) | 31,350 lbf (kN 139.5) | Zinc ni akɛwo mli, 5-8 μm | Nifeemɔi fɛɛ, brakɛtii, okwaayeli nibii. |
M10 | mm 1.5 | milimita 17 | milimita 8.4 | Klas 10.9 (Klas 10) | 50,600 lbf (kN 225.1) | Zinc ni akɛwo mli, 5-8 μm | Nitsumɔhei tsɔnei, tsɔnei ni akɛwoɔ tsɔne mli, dade freim tsakpaai. |
M12 | mm 1.75 | milimitai 19 | milimita 10.8 | Klas 10.9 (Klas 10) | lbf 73,200 (kN 325.6) | Zinc ni akɛwo mli, 5-8 μm | Nibii ni tsii, tsumaa sɛkɛfol, nɔnyɛɛ ni mli wa waa. |
M16 | 2.0 mm | milimitai 24 | milimita 14.8 | Klas 10.9 (Klas 10) | lbf 133,600 (kN 594.5) | Zinc ni akɛwo mli, 8-12 μm | Dade nitsumɔ agbo, blɔfo nibii, shika tsuru tsaa nibii. |
M20 | 2.5 mm | mm 30 | 18.0 mm | Klas 10.9 (Klas 10) | 209,400 lbf (kN 931.5) | Zinc ni akɛwo mli, 8-12 μm | Shishitoo, nitsumɔhei wuji, maŋ tsɔne he nitsumɔi wuji. |
Kaadimɔi:
Shishitoo mlai: Afee lɛ yɛ DIN 934 / ISO 4032 mli.
Nɔ ni akɛhaa: 12μm) ni haa ŋmɛlɛtswai 72-120 ni ŋmei ni bɛ mli lɛ nyɛɔ eshiɔ (ASTM B117). Nibii krokomɛi ni akɛgbeɔ naa (ni akɛ sũ ni mli edɔ woɔ mli, Geomet, kɛ ekrokomɛi) yɛ.
Odaseyeli Jatsu: Esa akɛ hewalɛ bibioo fe fɛɛ ni nut lɛ adamɔ shi ni efiteee daa. Values lɛ ji nɔ ni miihe ashɛ nibii ni kɛ amɛhe kpãa gbee lɛ ahe.
Kɛ feeɔ: Be fɛɛ be lɛ, kɛ bolt ni yeɔ egbɔ loo nɔ ni nɔ kwɔ fe nakai lɛ afee ekome kɛha emuuyeli ni hi fe fɛɛ.
thread ni akɛwoɔ mli kɛhaa tso
● Sinsun nibii ni akɛwoɔ mli ni akɛ tsɔne woɔ mli lɛ boteɔ bu ni afo yɛ tsei amli lɛ amli koni efee hei ni tsɔne kɛ tsɔne woɔ mli ni wa. Akɛ dade loo akɔɔble ni akɛ zinc ewo mli lɛ fee amɛ, ni kɛ́ ajie amɛ lɛ, amɛhe wa fe tso mli ŋtayaai pɛ fe 50%. Abaanyɛ akɛ dɛŋdade nɛɛ abua shĩa mli nibii ahe naji, nibii ni akɛwoɔ nitsumɔ sɛi kɛ wiemɔ tsɔnei amli lɛ anaa ni ajie kɛjɛ mli. Ehe miihia ni kpãai lɛ anyɛ adamɔ shi shii abɔ ni akɛtsuɔ nii.
t nuts kɛha tso
● Sinsun T-nuts lɛ haa mligbɛ flange ni mli wa kɛ ŋmeii ni boteɔ tsei ni akɛwoɔ tsɔne mli lɛ asɛɛ lɛ mli. Mashin lɛ mli tsɔji lɛ haa anyɛɔ agbalaa bolt ko kɛjɛɔ he kroko lɛ mli shiŋŋ. Enɛ ji nɔ ni akɛfiɔ okpɔlɔ naji, naji ni akɛtoɔ he, kɛ 80/20 aluminum ni ajieɔ kɛjɛɔ plywood loo particleboard nɔ lɛ he.
nut kɛha bolt
● Kɛtsɔ Sinsun nuts nɔ lɛ, abaanyɛ akɛ bolts abɔ amɛhe ni akɛ nibii abɔ he. Kɛha nibii ni jeɔ shishi kɛjɛɔ 4 kɛyashi 10 lɛ, obaanyɛ ona amɛ yɛ hex, square, kɛ flange henɔi amli. Atsakeɔ bolt tension lɛ awoɔ clamping force mli, ni akɛtsuɔ nii yɛ nɔ ni miihe ashɛ tsɔnei fɛɛ amli, kɛjɛ tsɔne tsɔnei amli kɛyashi dade tsɔnei anɔ.
nut ni akɛwoɔ mli kɛha dade
● Akɛ Sinsun nut ni akɛwoɔ dade mli lɛ woɔ dade fãi amli daa koni ekɛha kpãa lɛ mli awa ni ekɛ tsɔne lɛ akafite. Ayɛ nɔ ni akɛwoɔ mli, nɔ ni akɛwoɔ mli, kɛ nɔ ni akɛwoɔ helical coil mli, kɛ henɔi krokomɛi. Afee koni ekɛtsi kpãai ni yɔɔ dade ni yɔɔ blɛoo tamɔ aluminum lɛ amli lɛ anaa, ni akɛtsuɔ nii yɛ kɔɔyɔŋ lɛlɛ he tsɔnei, tsɔnei ahe tsɔnei, kɛ tsɔnei ni tsuɔ nii shii abɔ lɛ amli.
Na Quote Oya 
cap nuts kɛha kanei ahe nibii
● Sinsun cap nuts, ni ale lɛ hu akɛ acorn nuts lɛ yɛ ŋwɛi ni tamɔ dome ni buɔ bolt lɛ naagbee ni je kpo lɛ he. Bei pii lɛ, akɛ akɔɔble loo dade ni akɛ chrome ewo mli lɛ feɔ. Akɛtsuɔ nii babaoo kɛgbeɔ tsɔnei ni akɛwoɔ maŋ okadii, kanei, kɛ kanei ni akɛwoɔ ŋwɛi lɛ anɔ lɛ anaa. Yiŋtoo ni amɛyɔɔ ji koni nibii akakpɛtɛ he, ni amɛha amɛfee tamɔ nɔ ni amɛhe tse.
t nuts kɛha dade
● Afee Sinsun T-slot nuts lɛ koni ekɛbote ŋmeii amli yɛ aluminum ni ajie lɛ kpo lɛ mli. Akɛ bɔɔlu ni akɛ spring woɔ mli loo tsɔnei ni akɛ tsɔne ebɔ he lɛ tsuɔ nii kɛfiɔ amɛhe. Enɛ haa anyɛɔ atsakeɔ nibii ni bɛ naagbee ni yɔɔ shweshweeshwe yɛ tsɔne lɛ mli fɛɛ, ni he hiaa waa kɛha tsɔnei ahe mfonirii, tsũi, kɛ gbɛjianɔtoi ni akɛfeɔ nɔkwɛmɔnɔ lɛ.
nut ni akɛwoɔ mli kɛha plastic
● Akɛ Sinsun ultrasonic loo nut ni akɛwoɔ la mli lɛ feɔ kɛtsɔ plastic tsũi amli ni akɛwoɔ mli loo ni akɛmiimiɔ mli lɛ nɔ. Amɛyɛ dade kpãai ni mli wa ni sɛɛ efooo kɛji okɛ skruu wo mli shii abɔ. Nibii ni he hiaa ni akɛfiɔ nibii ni akɛtsuɔ nii, tsɔnei ni akɛtsuɔ nii yɛ tsɔne mli, tsɔne mli nibii, kɛ tsɔne mli nibii.
barrel nut kɛha shĩa mli nibii
● Krɔs dowel ŋmeii, ni atsɛɔ amɛ hu akɛ sinsun barrel ŋmeii lɛ ji ŋmeii ni tamɔ ŋmeii ni kɛ ŋmeii ni akɛtsaa ŋmeii lɛ yaa. Amɛboteɔ mli yɛ koŋ ni ja nɔ kɛyaa bɔlt lɛ he, ni amɛfeɔ fã ko ni mli wa ni yɔɔ teemɔŋ. Gbɛ ni atsɔɔ nɔ akɛ saatso ni yɔɔ ŋwɛigbɛ, shĩa mli nibii ni akɛwoɔ mli, kɛ shĩa mli nibii krokomɛi ni jɛɔ mli baa lɛ feɔ ekome.
rivet nuts kɛha dade ni akɛwoɔ tsɔne mli
● Rivnuts, loo sinsun rivet nuts ji nibii ni akɛfiɔ shwilafoi ahe ni akɛ nibii ni yɔɔ mlɛo tsuɔ nii. Amɛtsakeɔ amɛhe yɛ amɛsɛɛ kɛ́ okɛ nine loo kɔɔyɔɔ dɛŋdade ko wo mli, ni no haa amɛfeɔ bushing ni tsɔne yɔɔ mli ni hiɔ shi daa. Akɛtsuɔ nii koni akɛ kpãai ni mli wa ni baanyɛ ahiɛ muji babaoo afata tsɔne mli tsɔnei ahe, tsɔnei ni akɛwoɔ tsɔne mli, kɛ HVAC tsɔnei ni akɛwoɔ tsɔne mli he ni fã kome pɛ baanyɛ ashɛ he lɛ ahe.
wing nut kɛha tai tso
● Sinsun wing nuts ji nuts ni yɔɔ "wings" enyɔ ni jeɔ kpo ni abaanyɛ akɛ nine atswa. Obaanyɛ otsake bolts lɛ oya ni okɛ dɛŋdadei tsuuu nii, ni no haa amɛfeɔ nɔ ni hi jogbaŋŋ kɛha tai, turnbuckles, kɛ clamp shafts. Bei pii lɛ, akɛ dade loo dade ni sɛɛ tsɛɔ feɔ amɛ, ni no haa amɛhi jogbaŋŋ kɛha shwɛmɔ kpoku nɔ nibii, buu mli tsɔnei, kɛ jatsui ni akɛwoɔ mli lɛ.
Sanebimɔ: Te mafee tɛŋŋ makpɛ miyiŋ yɛ nut & screw ni akɛtsuɔ nii daa lɛ kɛ bolt ni ji fã kome lɛ teŋ?
+
A: Nut kɛ screw set ni yɔɔ srɔto lɛ hi fe fɛɛ beni ehe hiaa ni okɛ nibii enyɔ abɔ he kɛjɛ afãi enyɔ lɛ fɛɛ nɔ ni onyɛ ojie amɛ. Sinsun kɛ sets ni kɛ amɛhe kpãa gbee haa koni ekwɛ akɛ tsɔji lɛ feɔ ekome kɛtsuɔ nii. Obaanyɛ okɛfee brakɛtii, okɛ tsɔnei ahe tsɔji ato he, loo nɔ fɛɛ nɔ ni akɛbɔlt ko tsuuu nii yɛ mli ejaakɛ onyɛɛɛ oyashɛ bu ko ni akɛ tsɔne ebɔ he yɛ sɛɛ lɛ he.
Sanebimɔ: Ehe miihia ni makɛ kpãai ni mli wa afata dade woji bibii ahe. Mɛni ji nihalamɔ kpakpa?
+
A: O nɔ nɛ hi pe kulaa ji Sinsun riv nut (rivet nut). Obaanyɛ okɛ dɛŋdade ko ni yɔɔ mlɛo atsu nii ni okɛ nɛkɛ tsɔne ni akɛ tsɔne ebɔ he nɛɛ awo bu ko ni afo mli momo lɛ mli. Efoɔ yɛ sɛɛ, ni efeɔ tsɔne ni hiɔ shi daa, ni baanyɛ atere jatsu ni tsuɔ nii jogbaŋŋ kɛhaa tsɔne mli tsɔnei, tsɔnei ni akɛwoɔ tsɔne mli, loo nɔ kroko ni anyɛɛɛ ashɛ sɛɛgbɛ lɛ he.
Sanebimɔ: Ehe miihia ni makɛ kpãai ni mli wa afata dade woji bibii ahe. Mɛni ji nihalamɔ kpakpa?
+
A: O nɔ nɛ hi pe kulaa ji Sinsun riv nut (rivet nut). Obaanyɛ okɛ dɛŋdade ko ni yɔɔ mlɛo atsu nii ni okɛ nɛkɛ tsɔne ni akɛ tsɔne ebɔ he nɛɛ awo bu ko ni afo mli momo lɛ mli. Efoɔ yɛ sɛɛ, ni efeɔ tsɔne ni hiɔ shi daa, ni baanyɛ atere jatsu ni tsuɔ nii jogbaŋŋ kɛhaa tsɔne mli tsɔnei, tsɔnei ni akɛwoɔ tsɔne mli, loo nɔ kroko ni anyɛɛɛ ashɛ sɛɛgbɛ lɛ he.
Sanebimɔ: Mijeɔ tsɔne nitsumɔ shishi kɛkɛ. Mɛni ji nuts kɛ bolts henɔi titrii ni esa akɛ mikɛto?
+
A: Je shishi kɛ Sinsun shishijee nibii: Bolts lɛ baa yɛ henɔi enyɔ mli: hex yitso (kɛha nitsumɔ fɛɛ) kɛ socket yitso (kɛha ŋwɛi ŋta ni baa shi). Hex nuts (ni ji nɔ ni akɛtsuɔ nii), nylon lock nuts (ni nyɛɛɛ akpokpo), kɛ flange nuts (ni bɛ washer ni yɔɔ srɔto) ji nuts henɔi fɛɛ. Kɛji akɛ nɛkɛ henɔi nɛɛ yɛ dalɛ kome mli (M4, M5, M6, kɛ M8) lɛ, ebaashɛ 80% yɛ kpee kɛ nɔkwɛmɔnɔ nitsumɔ mli.
Sanebimɔ: Mɛni hewɔ bei pii lɛ, nibii ni akɛtsuɔ nii lɛ ahe nyɔmɔwoo lɛ fiɔ nuts lɛ srɔtoi lɛ?
+
A: Nut lɛ ji nɔ ko ni he hiaa ni hiɛɔ jatsu lɛ, shi jeee nɔ ko ni fata he kɛkɛ. Esa akɛ okɛɛ shwapo lɛ Sinsun nuts ni ji grade ni he hiaa bo lɛ (akɛ nɔkwɛmɔ nɔ lɛ, Class 8 loo 10) koni ona nɔmimaa akɛ amɛji hewalɛ ni sa kɛha bolt lɛ. Nɔ ni bɛ hewalɛ fe fɛɛ ji nut ni bɛ hewalɛ ni yɔɔ bolt ni mli wa nɔ. Ebaanyɛ efo kɛji akɛ eyɛ jatsu shishi, ni efite fã lɛ fɛɛ.
Sanebimɔ: Te ooofee tɛŋŋ okɛ panɛl akpɛtɛ sqɛɛ tube frem he jogbaŋŋ?
+
A: Okɛ Sinsun U-nut, ni ale lɛ hu akɛ tsɔne ni akɛwoɔ tsɔne mli lɛ atsu nii. Efoɔ kɛtsɔɔ tsɔne lɛ naa, ni etsitsii enyɔ lɛ mɔ̃ɔ mligbɛ. "U" su lɛ haa kpãa lɛ damɔ shi shiŋŋ ni enyɛɛɛ etsɔ kɛji okɛ skru lɛ tswa. Eji gbɛ ni yɔɔ oya ni yɔɔ mlɛo ni atsɔɔ nɔ atsumɔ srawa hewalɛ adekai, adekai, kɛ kar mli nibii.
Sanebimɔ: Ani rivnuts kɛ rivet nuts ni akɛ tsɔne ebɔ he lɛ ji nɔ kome?
+
A: Hɛɛ, amɛji. Gbɛi diɛŋtsɛ ni akɛtsɛɔ Sinsun nibii nɛɛ ji "threaded rivet nut," shi yɛ nitsumɔhe lɛ, bei pii lɛ atsɛɔ lɛ "rivnut." Eji shwilafoi ni akɛfiɔ nii ahe ni baa yɛ fã kome mli ni efeɔ mligbɛ tsɔne ni mli wa, ni hiɔ shi daa yɛ nibii ni yɔɔ mlɛo tsɔ ni anyɛɛɛ atswa mli.
Sanebimɔ: Mɛni haa shwilafo rivet nut lɛ feɔ srɔto yɛ pop rivet he?
+
A: Sinsun shwilafo rivet nut (rivnut) yɛ mligbɛ nine ni akɛ tsɔne ewo mli, shi pop rivet ji tsɔne ni wa ni tsɔne bɛ mli. Bɔni afee ni okɛ nibii abɔ he mlɛo lɛ, kɛ pop rivet atsu nii. Blind rivet nut ji nɔ ni hi jogbaŋŋ beni ehe hiaa ni ofee bolt-down point ni mli wa, tamɔ be mli ni ehe hiaa ni okɛ hinge loo bracket afata he ni ebaanyɛ etsu nii kɛjɛ nibii lɛ afã kome pɛ.
Sanebimɔ: Mibaanyɛ mayashɛ minitsumɔ nii lɛ hiɛ pɛ. Mɛɛ tsɔne ni akɛfiɔ nii ahe lɛ feɔ nut yɛ sɛɛ?
+
A: Sinsun shwilafo nut he miihia bo. Rivet ŋmeii (rivnuts) kɛ nubu ŋmeii ji nɔkwɛmɔnii enyɔ ni kɔɔ nibii ni yɔɔ kuu nɛɛ mli lɛ ahe. Akɛwoɔ mli kɛjɛɔ hiɛ, ni no sɛɛ lɛ dɛŋdade ko shwereɔ loo ekɛmiimɔ amɛ koni ekɛ amɛ ahi he ni amɛyɔɔ lɛ yɛ sɛɛ. Enɛ haa threaded point ni aŋɔ lɛ nom ni ehe ehiaaa ni ajɛ sɛɛ ashɛ he lɛ baa koni akɛwo mli.
Sanebimɔ: Miyɛ nut ko ni yɔɔ kokroo ni ŋmeii yɔɔ esɛɛ. Mɛɛ dɛŋdade he hiaa mi?
+
A: Nakai nut lɛ tamɔ circlip loo spanner. Bɔni afee ni ŋmeii lɛ atsu nii lɛ, ehe miihia ni oná Sinsun spanner nut (pin wrench) ni ŋmeii ni kɛ amɛhe kpãa gbee lɛ yɔɔ mli. Esa akɛ nɛkɛ ŋmeii nɛɛ asɛɛgbɛ ŋwɛi ŋta lɛ afee ŋmɔlɔŋmɔlɔ ni ehiɛ aka shi, bɔni afee ni akɛtsu nii yɛ bearing kuu, shwiili ni akɛshwieɔ nii anɔ, kɛ ŋmeii ni akɛshwieɔ nii anɔ pɛpɛɛpɛ lɛ anɔ.
Sanebimɔ: Mɛɛ nut akɛtsuɔ nii yɛ linear motion gbɛjianɔtoo ni yɔɔ pɛpɛɛpɛfeemɔ ni nɔ kwɔ nɔ?
+
A: No ji bɔɔlu skru nut ni jɛ Sinsun. Kɛji akɛ bɔɔlu ni tsɔɔ ŋwɛigbɛ lɛ shwieɔ shi yɛ skru lɛ tsɔne lɛ nɔ lɛ, nɔ ni fe 90% ni ebɔleɔ ehe lɛ tsɔɔ linear motion ni yɔɔ ŋmɔlɔŋmɔlɔ, ni sɛɛ efooo. Ehe miihia ni CNC tsɔnei, 3D printa, kɛ robot nibii ni tsuɔ nii lɛ fɛɛ afee nɔ ni ja jogbaŋŋ ni amɛhe ejɔɔɔ amɛ fioo ko pɛ.
Sanebimɔ: Mɛɛ nut akɛtsuɔ nii yɛ linear motion gbɛjianɔtoo ni yɔɔ pɛpɛɛpɛfeemɔ ni nɔ kwɔ nɔ?
+
A: No ji bɔɔlu skru nut ni jɛ Sinsun. Kɛji akɛ bɔɔlu ni tsɔɔ ŋwɛigbɛ lɛ shwieɔ shi yɛ skru lɛ tsɔne lɛ nɔ lɛ, nɔ ni fe 90% ni ebɔleɔ ehe lɛ tsɔɔ linear motion ni yɔɔ ŋmɔlɔŋmɔlɔ, ni sɛɛ efooo. Ehe miihia ni CNC tsɔnei, 3D printa, kɛ robot nibii ni tsuɔ nii lɛ fɛɛ afee nɔ ni ja jogbaŋŋ ni amɛhe ejɔɔɔ amɛ fioo ko pɛ.
Sanebimɔ: Mɛɛ tsɔne ni akɛfiɔ nii ahe esa akɛ mikɛtsu nii kɛ ehe miihia ni mikɛ minine atswa nɔ ko ni mikɛjie lɛ babaoo?
+
A: Okɛ Sinsun wing nuts loo thumb nuts atsu nii. Amɛhe nibii wuji ni tamɔ fɛ̃i lɛ haa onyɛɔ omɔɔ nii babaoo kɛha nine ni okɛtswaa. Amɛhi jogbaŋŋ kɛha gbɛ ni akɛboteɔ mli, kanei ahe tsɔnei, jigs, klampii, loo nitsumɔ kroko ni he hiaa ni onyɛ otsake loo ojie amɛ oya ni okɛ nibii tsuuu nii.
Sanebimɔ: Kpãai lɛ yaa nɔ amɛjeɔ mi aluminum fã ni yɔɔ blɛoo lɛ mli. Mɛni ma nyɛ ma pee kɛ ma pee?
+
A: Okɛ bushing ni wa loo helical coil ni akɛwoɔ mli lɛ afee Sinsun tsɔne ni akɛwoɔ mli lɛ. Ofoɔ kpãai momo lɛ amli, ohaa bu lɛ feɔ agbo, ni no sɛɛ lɛ okɛ skru loo onyɛɔ dade ni akɛwoɔ mli ni wa nɛɛ nɔ kɛyaa he ni eyɔɔ lɛ. Efeɔ kpãa hee ni mli wa fe tsutsu nɔ lɛ, efiteee, ni abaanyɛ akɛtsu nii shii abɔ.
Sanebimɔ: Mɛni ji locknut kpakpa ni abaanyɛ akɛtsu nii shii abɔ yɛ tsɔnei ni hosoɔ waa lɛ amli?
+
A: Sinsun Stover nut (loo ŋwɛi ŋta ni tsɔɔ ŋwɛi ŋta) ji nɔ ni hi jogbaŋŋ. Nut lɛ yiteŋgbɛ fã lɛ tamɔ oval fioo, ni akɛ dade fee. Enɛ haa bɔlt lɛ tsɔji lɛ shwieɔ amɛhe (prevailing torque) beni atswaa lɛ, ni no haa ehiɔ shi yɛ he ni eyɔɔ lɛ. Abaanyɛ akɛtsu nii fe shikome ni ehi jogbaŋŋ yɛ dɔlɛ kɛ shikpɔŋhosomɔ he nitsumɔ mli fe nylon ni akɛwoɔ mli lɛ.
Sanebimɔ: Mi lathe lɛ fã ni kɛ lead screw lɛ tsuɔ nii koni ekɛfee tsɔji?
+
A: No ji Sinsun mligbalamɔ nut lɛ, ni atsɛɔ lɛ hu akɛ fã nut. Eji ŋmei ni afo mli enyɔ yɛ elɛɛmɔ mli. Lathe tsɔne lɛ fãi enyɔ lɛ tsiɔ amɛhe kɛbɔleɔ lead screw lɛ he kɛ́ ogbala lever lɛ. Enɛ haa tsɔne lɛ nyiɛmɔ lɛ kɛ tsɔne ni akɛfoɔ tsɔne lɛ mli lɛ sɛɛtsimɔ, ni ŋmɛɔ tsɔne lɛ mli tsɔnei pɔtɛɛi lɛ kpaa gbee.
Sanebimɔ: Mɛɛ mi lathe lɛ fã kɛ lead screw lɛ tsuɔ nii kɛfoɔ tsɔji?
+
A: No ji Sinsun mligbalamɔ nut lɛ, ni ale lɛ hu akɛ fã nut. Enɛ ji ŋmei ko ni afo mli enyɔ yɛ elɛɛmɔ naa. Kɛ́ ogbala lever lɛ, lathe tsɔne lɛ fãi enyɔ lɛ feɔ ekome kɛbɔleɔ lead screw lɛ he. Enɛ haa tsɔne ni akɛfoɔ tsɔne lɛ mli lɛ sɛɛtsimɔ lɛ kɛ tsɔne lɛ nyiɛmɔ, ni shwieɔ kpãai pɔtɛɛi lɛ kpaa gbee.
Sanebimɔ: Mɛɛ nut ji nɔ ni hi fe fɛɛ kɛha naji ni akɛkpɛtɛɔ tso tsɔji ahe?
+
A: Kɛha tso lɛ, tso nuts ni jɛ Sinsun lɛ he baahia bo. Shishitoo lɛ mli kwɔ ni eyɛ ŋmɔlɔŋmɔlɔ, ni ŋmeii lɛ yɛ ŋmɔlɔŋmɔlɔ ni amɛtswaa tso lɛ sɛɛ. Bolt lɛ tsɔɔ nut lɛ tsɛnsi lɛ mli kɛjɛɔ he kroko lɛ ni egbalaa T-nut lɛ shishigbɛ lɛ kɛyaa tso lɛ he waa. Afeɔ tsakpaa ko ni mli wa waa ni gbɛɔ muji lɛ eshwaa.
Sanebimɔ: Miitao nut ni shɛɔ gbɛ fɛɛ gbɛ kɛyaa chanel loo slot mli. Mɛni esa akɛ mikɛtsu nii?
+
A: Afee Sinsun flat nut (ni atsɛɔ lɛ hu akɛ sqɛɛ nut loo hex nut ni yɔɔ shishigbɛ) kɛha enɛ. Eyɛ mlɛo ni ekɛ ehe woɔ T-slots ni ji extrusion profiles loo tsɔnei ni akɛtsuɔ nii lɛ amli. Okɛshwieɔ shi kɛyaa he ni eyɔɔ lɛ, ni etsiŋ ehe, ni no haa onyɛɔ okɛ bolt ko tswaa kɛjɛɔ ŋwɛi—ni afɔɔ feemɔ yɛ tsɔnei ahe mfonirifeemɔ, tsɔnei ahe nitsumɔ, kɛ nibii ni akɛwoɔ tsɔne mli lɛ amamɔ mli.
Sanebimɔ: Minaa ŋmei ko ni yɔɔ kokroo ni bu loo ŋmeii yɔɔ ehiɛ. Te efeɔ tɛŋŋ efeɔ mlɛo?
+
A: No ji Sinsun ŋmɛlɛtswaa ŋmɛlɛtswaa. Obaanyɛ okɛ C-wrench ni shɛɔ ŋmeii lɛ amli loo pin spanner wrench ni shɛɔ ŋmeii lɛ amli lɛ atsu nii. Nɛkɛ gbɛjianɔtoo nɛɛ haa kponɔgbɛ lɛ feɔ ŋmɔlɔŋmɔlɔ, ni bei pii lɛ akɛtsuɔ nii koni akɛwo bearings lɛ awo tsɔne ko nɔ loo akɛhiɛ fãi komɛi yɛ he ni tsɔne ni akɛtsuɔ nii daa lɛ nyɛŋ ashɛ he lɛ.
Sanebimɔ: Mɛɛ nut nɛkɛ abaanyɛ akɛtsu nii hu akɛ spacer loo shaft kɔla?
+
A: Sinsun kɔla nut, ni ji hex nut ni yɔɔ flange ni sɛɛ tsɛɔ fe no. Kɔla lɛ, ni ji fã kakadaŋŋ ni tsɔne bɛ mli lɛ, tsɔɔ fãi ni yɔɔ tsɔne loo bolt nɔ lɛ amli, ni ekɛtoɔ amɛhe, ni ebuɔ tsɔnei lɛ ahe. Bei pii lɛ, hewalɛ ni akɛhaa kɛ kpeei ni akɛtsuɔ nii pɛpɛɛpɛ lɛ kɛtsuɔ nii.
Sanebimɔ: Enɛ baanyɛ afee tamɔ sanebimɔ ko ni yɔɔ mlɛo, shi mɛni ji nitsumɔ titri ni tsɔne ni akɛwoɔ tsɔne mli lɛ tsuɔ?
+
A: Nitsumɔ titri ni Sinsun threaded nut tsuɔ ji ni etsake ŋmei ni yɔɔ bolt mli lɛ mli kɛya hewalɛ ni akɛfiɔ fãi lɛ ateŋ lɛ mli. Kɛ́ otsɔ nut lɛ mli waa lɛ, efãa kɛyaa bolt lɛ mli kpãai lɛ anɔ, ni egbalaa tsɔne ni akɛtswaa lɛ lɛ mli. Hewalɛ ni akɛfiɔ nii ahe lɛ haa ŋmɔlɔ baa, ni no ji nɔ ni haa okpee lɛ tsiɔ ehe ni ehaa efeɔ ekome.
Sanebimɔ: Mɛɛ be ehe baahia ni mikɛ dade ŋmeii atsu nii yɛ plastic ŋmeii najiaŋ?
+
A: Be fɛɛ be lɛ, okɛ Sinsun dade ŋmeii atsu nii kɛ́ ehe miihia ni okɛ tsɔne lɛ atsu nii jogbaŋŋ, kɛ́ hulutsoo be lɛ fe 250°F/120°C, loo kɛ́ ehe miihia ni okɛ hewalɛ babaoo awo mli. Nibii ni akɛtsuɔ nii ekomɛi ji tsɔne lɛ nɔ nibii, tsɔne lɛ fãi, dade ni akɛfeɔ tsɔne lɛ, kɛ tsɔne fɛɛ tsɔne ni esa akɛ ekɛ nɔnyɛɛ babaoo, shikpɔŋhosomɔ, loo dɔlɛ atsu nii yɛ he ni plastic baatsɔ loo ebaatsɔ mli lɛ.
Sanebimɔ: Mɛni ji "ss nut" shishi, ni mɛɛ be ehe hiaa?
+
A: "SS nut" shishi ji dade ni bɛ ŋmɔlɔ. Sinsun nuts (ni bei pii lɛ eji 304 loo 316 grade) lɛ haa ŋmeii nyɛɔ eshiɔ ŋmeii jogbaŋŋ yɛ shihilɛi ni mli wawai amli. Akɛ nɔkwɛmɔnɔ lɛ, ŋshɔ mli nitsumɔi, niyenii afeemɔ, tsofafeemɔ tsei, kɛ kponɔgbɛ nibii fɛɛ ji nitsumɔi ni hi jogbaŋŋ kɛha Sinsun dade ni bɛ ŋmɔtɔ (bei pii lɛ 304 loo 316 grade). Amɛtsiɔ ŋmei ni shwieɔ shi kɛ fitemɔ naa, eyɛ mli akɛ amɛhe yɛ blɛoo fe dade ŋmeii ni tsii waa moŋ.
Sanebimɔ: Ani obaanyɛ otsɔɔ mli faŋŋ: ani rivnut ni akɛ tsɔne ebɔ he lɛ kɛ rivet lɛ ji ekome?
+
A: Daabi, jeee nakai. Akɛ "pulling" dɛŋdade ko woɔ amɛyi enyɔ lɛ fɛɛ mli, shi Sinsun threaded rivnut shĩɔ thread bu ko ni baanyɛ aŋɔ skru loo bolt yɛ sɛɛ. Rivet ni akɛtsuɔ nii daa lɛ ji tsɔne ko ni wa kɛkɛ ni tsɔɔ bu ko mli koni ekɛfi nibii ahe. Rivnut feɔ nut, ni rivet ji tsɔne ni hiɔ shi daa ni tsɔne ko bɛ he.
Sanebimɔ: Ani ehe miihia ni mikɛ grade 8.8 bolts ni grade 8.8 nuts yɔɔ mli lɛ atsu nii?
+
A: Hɛɛ, anɔkwale. Be fɛɛ be lɛ, okɛ Sinsun nut ni ji grade kome loo nɔ ni fe nakai atsu nii (akɛ nɔkwɛmɔnɔ lɛ, esa akɛ 8.8 bolt lɛ aná 8-grade nut). Kɛ́ bɔlt lɛ mli wa waa lɛ, ŋmeii ni yɔɔ shishigbɛ lɛ baanyɛ ajie loo abɔle, ni no haa bɔlt ni he wa waa lɛ feɔ nɔ ni he ehiaaa. Bolts he miihia nuts koni amɛfee ekome kɛtsu nii koni amɛfee tsakpaa ni yɔɔ shweshweeshwe ni yɔɔ shweshweeshwe. Kaaha nɔ ni baa shi fe ŋmeii ni hi fe fɛɛ lɛ miitsu nii kɔkɔɔkɔ.
Keep In Touch
TO KNOW MORE ABOUT Sinsun, PLEASE CONTACT US！
We are committed to providing you with the best quality service and look forward to communicating with you to solve problems together and bring you a better experience.
our experts will solve them in no time.