Mashinii Gboɔ & Punch

Gbomɔi ni He Wa, Kumɔ Ko bɛ – Hewalɛ ni fe nine kɛha tsɔji ni wa.

Nibii ni ja, Tɔmɔi ni bɛ – Nɔ ni hi jogbaŋŋ ni obaanyɛ okɛ ohe afɔ̃ nɔ.

Roll Oya, Hiɛɔ Be kakadaŋŋ – Boost nibii ni jɛɔ mli baa, slash be ni akɛtsuɔ nii.

Sinsun kpãa ni akɛfoɔ gbohii afeelɔi: Nɔ ni Hiɔ Shi Kɛyaa He Fɛɛ & Pɛpɛɛpɛ kɛha Nitsumɔi ni Biɔ

Nɔyelɔ ni feɔ kpãa ni sɛɛ tsɛɔ waa ni gboiɔ. Tsɔɔmɔ fitemɔ kɛ nitsumɔ be. Na thread ni yaa nɔ daa & jara ni baa shi yɛ fã fɛɛ fã mli. Bi otsabaa lɛ.

Mɛni hewɔ esa akɛ ohala Sinsun yitso kɛ tsɔne ni akɛfoɔ tsɔne mli lɛ?

Hewalɛ ni nɔ bɛ, jara ni baa shi

Dade kɛ latsaa ni yɔɔ srɔto ni wɔkɛtsuɔ nii lɛ tsiɔ ŋmeii kɛ fitemɔ naa, ni no haa dɛŋdade lɛ wala sɛɛ tsɛɔ 30% ni ehe nibii lɛ ahe nyɔmɔwoo baa shi.

Nɔ ni ja kɛha nifeemɔ ni tɔmɔ ko bɛ he

CNC ni akɛtsuɔ nii pɛpɛɛpɛ lɛ haa tsɔji lɛ kɛ yitsei lɛ yeɔ emuu, ni no haa tsɔji lɛ shwieɔ shi ni ehaa fãi ni akpooɔ lɛ ayibɔ baa shi.

Afee Koni Eya Nɔ Ejo Foi Be Be Fɛɛ Bɔ ni Eeenyɛ

Nibii ni afee lɛ jogbaŋŋ kɛ nibii ni akɛwoɔ mli lɛ tsiɔ nibii anaa koni amɛkatsi amɛhe ni amɛkumɔ, ni no haa be ni okɛtsuuu nii ni atooo he gbɛjianɔ lɛ baa shi, ni ehaa nibii ni okɛtsuɔ nii lɛ yaa hiɛ.

Sɛɛnamɔ ni yɔɔ shika fɛɛ he

Wɔkɛ wɔjwɛŋmɔ maa shika fɛɛ ni akɛwoɔ nɔ lɛ nɔ ejaakɛ wala sɛɛ tsɛɔ, be ni akɛtsuɔ nii fioo, kɛ nɔ ni hi jogbaŋŋ ni yaa nɔ daa lɛ kɛ shika ni akɛwoɔ mli lɛ he nyɔmɔwoo ni yaa hiɛ oya, ni fa babaoo baa.

Sinsun pɛpɛɛpɛ kpãa ni shwieɔ shi - Nɔ ni kɔɔ he lɛ fɛɛ kɛ saji ni kɔɔ he

Kwɛmɔ Sinsun tsɔne ni akɛwoɔ tsɔne mli lɛ he saji fɛɛ (S, H, L1, L2). Taomɔ die pɔtɛɛ kɛha o-fastener lɛ dalɛ. Afee koni ehi shi be kakadaŋŋ ni etsu nii pɛpɛɛpɛ. Gbalamɔ nibii lɛ loo bi ni aha bo shika.

Skru kpã ni akɛfoɔ gbonyo he saji (Sinsun)

Okpɔnɔ nɔ ni yɔɔ shishigbɛ nɛɛ tsɔɔ wɔ tsɔne ni akɛfoɔ tsɔne lɛ mli lɛ dalɛi, ni afee koni etsu nii jogbaŋŋ kɛ tsakemɔ.

Saji	Etsitsi (S) mm	Kɛlɛ (H) mm	Kɛlɛ (L1) mm	Kɛlɛ (L2) mm	Nɔ ni aŋmala ashwie shi
KO	19	25	51	64	Kɛha fastener tsɔji bibii
B	25	25, 38, 55	75	90	Nɔ ni yɔɔ srɔtoi yɛ teŋgbɛ
C	25	25, 40, 55, 65, 80	100	115	Hewalɛ ni nɔ kwɔ ni ato he gbɛjianɔ
D	25	25, 40, 55, 65, 80, 105	127	140
KƐ	25	25, 40, 55, 65, 80, 105	150	165	Kɛha tsɔne ni sɛɛ tsɛɔ
F	35	55, 80, 105, 125, 150	190	215	Fastener agbo ni tsuɔ nii waa
G	38	55, 80, 105, 125, 150	230	265	Nitsumɔ ni tsii babaoo
H	15	20	45	55	Kɔmpakt pɛpɛɛpɛ sɛɛkuu
hi	20	25	65	80
J	20	25	60	70
K	25	25, 30, 40, 55	90	105
L	25	25, 30, 40, 55, 65	108	127
M	25	25, 40, 55	110	125
N*	20.8	25, 40	73.3	86.2	*Kɛ hiɛ ni yɔɔ 5°koŋ
P*	20.8	25, 40, 53 lɛ nɔ	92.3	105.2	*Kɛ hiɛ ni yɔɔ koŋ 5°
Q*	23.8	25, 40, 54 lɛ	112	131.2	*Kɛ hiɛ ni yɔɔ koŋ 5°

Kladowa:

S (Kwɛmɔ):Die gbɔmɔtso lɛ mlilɛɛmɔ.

H (Kɛlɛ):Nitsumɔ he saji ni he hiaa waa.

L1 / L2:Gbomɔ lɛ fɛɛ sɛɛ tsɛɔ kɛha nɔ ni akɛwoɔ nɔ kɛ shifimɔ.

Aplikashiŋ:Halamɔ yɛ skru/bolt diamita, kpã lɛ kɛlɛ, kɛ tsɔne ni shwieɔ shi lɛ henɔ nɔ.

Mɔ diɛŋtsɛ nifeemɔ:Dalɛi ni ato he gbɛjianɔ lɛ fɛɛ yɛ. Na wɔ kɛha kusum naa susumɔi kɛ saji.

Skru yitso punch henɔi (Sinsun feemɔ)

Okpɔlɔi ni nyiɛ sɛɛ nɛɛ tsɔɔ wɔ yitso ni akɛtswaa tsɔne lɛ mli kɛtsɔ skru yitso henɔi kɛ tsɔne kudɔmɔ henɔi ni afee amɛ koni amɛfee lɛ nɔ.

Skru Yitso Style	Wiemɔ kuku ni afɔɔ namɔ	Nɔ ni Atsɔɔ mli / Nitsumɔ ni Afɔɔ Nitsumɔ
Shia	SHIA	Countersunk kɛha ŋwɛi ni yɔɔ ŋmɔlɔŋmɔlɔ naagbee.
Oval	OVAL	Yitso ni yɔɔ kokroo, ni mli ekɔɔɔ.
Fimɔ	BINDING	Akɛtsuɔ nii yɛ tsɔne ni akɛwoɔ tsɔne mli lɛ mli.
Pan (LƐ)	PAN (LƐ)	Yitso ni tamɔ dish ni eshishigbɛ yɔɔ kokroo (JIS shishitoo mla).
Pan (ANSI)	PAN (ANSI)	Yitso ni tamɔ niyenii (ANSI/DIN shishitoo mla).
Kokróo	KOKRÓO	Domed ŋwɛi hiɛ.
Trɔs	TRASS	Yitso ni yɔɔ shishi, ni mli kwɔ.
Bɔtun	BƆTUN	Dome ni baa shi, diamita bibioo fe Round.
Flɛt ni yɔɔ ŋwɛi	PF.	Nɔ ni yɔɔ ŋwɛi, ni yɔɔ ŋwɛi.
Pan kɛ Washer	PAN HE TSƆƆ	Washer ni akɛwo mli (ni ajieee) shishitoo.
Tsiisi	TSIISI	Yitso ni yɔɔ ŋwɛigbɛ ni yɔɔ ŋwɛigbɛ.
Filista	FILISTA	Yitso ni tamɔ tsilindri ni ŋwɛigbɛ yɔɔ kokroo.
q	Wiemɔ kuku ni afɔɔ namɔ	Tsɔɔmɔ
Filips	FILIPS	Krɔs-hejɔɔmɔ, yiŋtoo-fɛɛ tsɔne kudɔmɔ.
Slot (Standard)	SLOTT	Slot kome ni ja.
Slotted (Elɛɛmɔ muu lɛ fɛɛ)	SLOTTED (Eyi obɔ)	Slot lɛ tsɔɔ yitso lɛ mli fɛɛ.
Phillips/Slɔt ni akɛwoɔ mli	FILIPS / HE.	Hejɔɔmɔ ni akɛfee ekome.
Torx (Lobe-enumɔ)	LOBE-ENƐ	Shibɔlemɔ ŋulami-he-gbɛ kɛha torque ni nɔ kwɔ ni akɛyaa.
Torx ni nyɛɔ efiteɔ nii	TAMPƐ NI HIƐ LOBE ENƐ	Torx ni yɔɔ teŋgbɛ shweshweeshwefeemɔ pin.
Torx/Slɔt Kombo	LOBE-ENƐ / HE.	Hejɔɔmɔ ni akɛfee ekome.
Pozidriv	EKPAKPA	Krɔs-recess kɛ tsitsii krokomɛi ni fata he kɛha cam-out ni baa shi.
Pozidriv/Bu ni yɔɔ kokroo	POZIDRIV / BU NI AKƐ WOƆ	Kɛ shweshweeshwefeemɔ bu ko ni yɔɔ teŋgbɛ ni yɔɔ kokroo lɛ fata he.
Skwɛɛ (Robertson)	SKWƐƐ	Skwɛɛ hejɔɔmɔ.
Skwɛ/Slot Kombo	SKƐƐ / HE.	Hejɔɔmɔ ni akɛfee ekome.
Phillips/Skwɛɛ Kombo	FILIPS / SQƐƐ	Hejɔɔmɔ ni akɛfee ekome (nɔkwɛmɔnɔ, Quadrex).
Koŋ etɛ	KOJI ETƐ	Recess ni yɔɔ koŋ etɛ kɛha tamper shitee-kɛ-woo.
Y-Henɔ	Y-HENƆ	Y-hegbɛ hejɔɔmɔ.
Fiji etɛ	FƐI-ETƐ	Recess ni yɔɔ blade etɛ kɛha tamper shitee-kɛ-woo.
S-Henɔ	S-HENƆ	"Onufu-hiŋmɛi" bu enyɔ mli hejɔɔmɔ.
H-Henɔ	H-HENƆ	H-hegbɛ ni yɔɔ ŋwɛi.
Hex Sokɛt	HƐKSAAGƆN	Hex draiva ni yɔɔ mli (Allen).
5-Oti	5-YIƐ	Pentagon hejɔɔmɔ kɛha shweshweeshwefeemɔ.
8-Oti	8-YITSƆƆ	Skwɛɛ-enyɔ hejɔɔmɔ.
Splin	SPLIN	Recess ni yɔɔ ŋmeii babaoo.
Spana (Bu-Enyɔ)	SPANNƐ	Shweshweeshwefeemɔ tsɔne ni yɔɔ bu enyɔ mli.
Klatsi	KLATS	Bow-tie he mfoniri.
Phillips/He ni Akɛwo Mli	FILIPS / SLOT.IND.	Kɛfata he kɛ slot ni awo mli.
Slot ni awo mli	SLOT.IND.	Slotted drive ni yɔɔ teŋgbɛ.

Niŋmaa: Sinsun feɔ yitsoŋ tsɔnei ni sa jogbaŋŋ ni ekɛfeɔ yitsoŋ tsɔnei nɛɛ kɛ ekrokomɛi ni yɔɔ srɔto kɛ tsɔne kudɔmɔ tsɔnei. Na wɔ tsɔne he nilelɔi akuu lɛ kɛ otaomɔi pɔtɛɛ.

Gbomɔi ni hiɔ shi be kakadaŋŋ kɛ Punches Pro-GradeMligbalamɔ

Abaanyɛ afee lɛ bɔ ni osumɔɔ, nɛkɛ dɛŋdadei nɛɛ fɔ̃ɔ amɛhe nɔ akɛ amɛhe wa waa. Ehi jogbaŋŋ kɛha skru, waobii, kɛ staples—ewoɔ nitsumɔ mli hewalɛnamɔ kɛ nibii ni afee ekome lɛ nɔ.

Nitsumɔ ni ana he odaseyeli: Sinsun Nibii ni Akɛbaatsu Nii Kɛjɛ Poland kɛyaa Vietnam

Sinsun nibii ni akɛtsuɔ nii lɛ ji nɔ ni afee koni ekɛfee ekome kɛtsu naagbai ahe nii yɛ nitsumɔhei pɔtɛɛ komɛi amli, shi jeee akɛ nibii ni yɔɔ srɔtoi kɛkɛ. Kɛtsɔ nibii ni anyɛɔ akɛ he fɔ̃ɔ nɔ, nitsumɔ pɔtɛɛ ni haa nitsumɔ yaa hiɛ ni haa nɔ ni jɛɔ mli baa lɛ nɔŋŋ baa be fɛɛ be lɛ nɔ lɛ, wɔtsuɔ nitsumɔ mli naagbai titri ni ji shweshweeshwefeemɔ he osharai, nitsumɔ ni tsuuu nii jogbaŋŋ, kɛ nibii ni hi jogbaŋŋ ni kɛ amɛhe kpaaa gbee lɛ ahe nii.

01 /

Ni mɔ ni heɔ nii kɛ maŋ ni akɛtswaa ŋtayaa yitso lɛ ji Autopart Polska Sp. z oo yɛ Poland.

"Wɔfeɔ bolts babaoo kɛha tsɔne breki, ni Sinsun Screw Header Punch lɛ ehi shi jogbaŋŋ ni akɛtsuɔ nii." Punch lɛ eha wɔdɛŋdadei lɛ ashihilɛ etee hiɛ toi enyɔ ni eha amɛhi shi jogbaŋŋ kwraa.

02 /

Skru Punch Kliɛnt kɛ Maŋ: Nibii ni Akɛtsuɔ Nii Vietnam Co., Ltd., Vietnam

"M1.0 skru bibii feemɔ kɛha tsɔnei ni akɛtsuɔ nii lɛ ji kaa pɔtɛɛ." Sinsun micro screw punch lɛ feɔ yitsei ni yeɔ emuu ni bɛ ŋwɛigbɛ ni yɔɔ ŋmɔlɔŋmɔlɔ. Wɔkɛ wɔhe fɔ̃ɔ enɛ nɔ waa koni wɔkwɛ wɔ yibiiwoo ni nɔ kwɔ lɛ nɔ yɛ Hai Phong.

03 /

Punch Dies Kliɛnt kɛ Maŋ: Brasfix Nitsumɔhe kɛ Nihɔɔmɔ Ltda. yɛ Brazil

"Sinsun punch dies lɛ mli wa waa akɛ ejie wɔ naagba ni haa wɔgbala lɛ shi beni wɔfeɔ dade hex bolts ni yɔɔ carbon babaoo lɛ." Nɔ ni jɛ mli ba ji akɛ, wɔbɛ be babaoo ni wɔkɛbaatsu nii yɛ wɔwoji akalamɔhei lɛ amli yɛ So Paulo, ni enɛ haa wɔshɛɔ wɔbe ni ato lɛ he mlɛo.

04 /

Screw Gboɔ Kliɛnt kɛ Maŋ: MegaFast Nitsumɔhei ni yɔɔ India

Nibii ni akɛtsuɔ nii lɛ yɛ haomɔ babaoo shishi kɛ́ afee ankɔ bolts kɛha nitsumɔi ni kɔɔ tsɔnei ahe lɛ,’ mɔ ko kɛɛ. Sinsun screw dies lɛ mli wa waa ni amɛfoŋ, no hewɔ lɛ, fãi lɛ hi jogbaŋŋ be fɛɛ be.

05/

Mɔ ni Heɔ Nii kɛ Maŋ: Taiwan Nitsumɔhe ni Kwɛɔ Nibii Anɔ yɛ Taiwan, China

Hetoo: "Sinsun kpãa ni shwieɔ shi lɛ haa nɔ ni hi fe fɛɛ kɛ kpãa shishifã hewalɛ kɛha wɔ sokɛt yitso tsɔne ni hi jogbaŋŋ lɛ." Enɛ eha wɔ naagbee nibii lɛ ehi shi be kakadaŋŋ, ni eha wɔ nibii ni wɔkɛtsuɔ nii lɛ ahe gbɛi kpakpa etee hiɛ.

Keep In Touch

TO KNOW MORE ABOUT Sinsun, PLEASE CONTACT US！

We are committed to providing you with the best quality service and look forward to communicating with you to solve problems together and bring you a better experience.

our experts will solve them in no time.

Mashinii Gboɔ & Punch