Ankɔ ni Gbalaa Mli
Nɔ ni Akɛfiɔ He Shweshweeshwe, Oshara ni Akɛbaatsu Nii.
Ankɔ ni He Wa Kɛha Shishi Nibii Fɛɛ.
Factory Ama, Ehiɔ Shi Be Be kakadaŋŋ.
Nitsumɔhe lɛ mlilɛɛmɔ tɛ̃ɛ Ankɔ | Plastic ni afee lɛ diɛŋtsɛ & Shield Bolt ni mlilɛɛmɔ shii enyɔ
Nitsumɔhe nitsumɔ mlilɛɛmɔ ankɔ, plastic mlilɛɛmɔ ankɔ fata he, mlilɛɛmɔ shield enyɔ, dade mlilɛɛmɔ bolts. Sinsun haa M6/M8/M10 shweremɔ bolt kɛha kɔnkrit kɛ dade ni akɛwoɔ nɔ, jatsu ni yɔɔ shiŋŋ kɛ ŋmeii ni teɔ shi ewoɔ. Na jara ni akɛhɔ̃ɔ lɛ fɛɛ bianɛ.
Na Quote Oya Ankɔ ni Gbalaa Mli: Kɔnkrit Nibii ni Akɛfiɔ He ni Anyɛɔ Akɛ He Fɔ̃ɔ Nɔ ni jɛ Sinsun Nitsumɔhe lɛ
Taakɛ eji nɔ kome ni anyɛɔ atsuɔ he nii jogbaŋŋ ni akɛfiɔ tsumaa kɛ nitsumɔhei nitsumɔi ahe lɛ, ale ŋwɛi ŋtayaai hu akɛ ŋwɛi ŋtayaai, ŋwɛi ŋtayaai ni akɛbuɔ shield he, kɛ tsɔnei ni akɛyaa ŋwɛi ŋtayaai. Nɛkɛ hardware nɛɛ haa tensile kɛ shear hewalɛi ni yɔɔ shiŋŋ yɛ shishitoo nibii srɔtoi anɔ kɛtsɔ tsɔne mlilɛɛmɔ nɔ yɛ be mli ni akɛwoɔ mli lɛ sɛɛ, ni ehaa friction lock ni mli wa baa. Nibii ni afɔɔ feemɔ ji M6 shweremɔ bolt, M8 shweremɔ bolt, kɛ M10 shweremɔ bolt, ni akɛtsuɔ nii yɛ jatsu ni tsii kɛyashi jatsu ni tsii ni akɛwoɔ mli lɛ mli.
Sinsun shweremɔ ankɔs lɛ yɛ srɔto yɛ jarayeli nibii ni afɔɔ feemɔ lɛ ahe yɛ nifeemɔ gbɛjianɔtoi ni asaa kɛ nɔkwɛmɔ ni mli wa hewɔ. Heat tsamɔ ni ato he gbɛjianɔ kɛ anti-rust coating. Wɔ tsɔnei ni haa shwereɔ shii enyɔ kɛ dade ni shwereɔ ni sɛɛ tsɛɔ lɛ fɛɛ yɛ shweremɔ ni yaa hiɛ, gbogbo ni mli wa ni ekɛ ehe kpaa gbee, ni ehiɔ shi jogbaŋŋ fe ŋtayaai ni akɛtsuɔ nii daa lɛ. Ayɛ dalɛ kɛ hiɛ he tsamɔi ni ato he gbɛjianɔ koni ekɛ jeŋ muu fɛɛ tsumaa kɛ nitsumɔhei ni akɛwoɔ mli lɛ ahe mlai lɛ akpee.
Wɔtswaaa mɛi ni wɔsumɔɔ waa lɛ. Wɔfeɔ nibii yɛ board lɛ fɛɛ nɔ. Nɔ ni miitsi ehe amrɔ nɛɛ nɛ :
Teknik mli saji kɛ dalɛ okpɔlɔ bolt ni mlilɛɛmɔ
Teknik mli saji kɛ dalɛ okpɔlɔ bolt ni mlilɛɛmɔ
Hunu
Kladowa
Teknik paramitai:
Teknik paramitai:
Matiria:
Kabon dade (ni akɛ zinki ewo mli/HDG), dade ni bɛ ŋmɔlɔ 304/316, nailon PA6.
Hewalɛ grade:
4.8, 8.8, 10.9 ni yɔɔ
Mlilɛɛmɔ henɔ:
Torque‐kudɔ (wedge kɛ sleeve ankɔs babaoo)
Dɔlɛ henɔ:
–40°C kɛyashi +100°C (nailon), –40°C kɛyashi +400°C (dade)
Nibii ni akɛtsuɔ nii: Sinsun ŋwɛi ŋta ni mlilɛɛmɔ
He ni Okɛ Enɛɛmɛi Baatsu Nii yɛ
1.Expansion ankɔs kɛha kɔnkrit
Shishitoo ko ni atoɔ? Musu gbogbo ni ama? Amrɔ nɔŋŋ ni akɛ M10 shweremɔ bolt loo M8 shweremɔ bolt ni akɛwo kɔnkrit ni wa mli lɛ ahiɛ mli. Nɔ ni fata ŋwɛi ŋtayaai ni wɔkɛha lɛ ahe ji ŋwɛi ŋtayaai ni akɛwoɔ nitsumɔhei shikpɔŋ, ŋtayaai ni akɛshwieɔ shi kɛha ŋwɛi ŋtayaai, kɛ ŋtayaai ni akɛwoɔ tsɔne ni akɛwoɔ tsɔne mli lɛ nɔ. Ebɛ naakpɛɛ akɛ tsakpaa lɛ hiɔ shi.
2. Ankɔɔ ni akɛgbalaa dade
Esa akɛ dade ni akɛwoɔ tsɔne mli lɛ afee kɔnkrit. NO JI HE NI MECHANICAL EXPANSION ANN Otsɔɔ dade shishitoo tsɔne lɛ mli kɛboteɔ kɔnkrit ni yɔɔ shishi lɛ mli, ni okɛwoɔ mli waa. Nibii ni akɛwoɔ tsɔne mli ni haa mɔ he jɔɔ lɛ shii enyɔ lɛ kɛ jatsu lɛ yaa hei enyɔ, ni ehaa nɔnyɛɛ ni yɔɔ kɔnkrit lɛ naa lɛ baa shi, ni ehaa tsɔnei ni tsii, shweshweeshwefeemɔ he tsɔnei, kɛ tsɔnei ni akɛtswaa ŋwɛi ŋtayaai lɛ ehiɛ shi yɛ afii babaoo ni amɛhoso kɛ kɔɔyɔŋ tsakemɔi amli lɛ amli. Na Quote Oya
3.Outdoor & Ŋshɔ mli Nibii ni Akɛbaatsu Nii
Sinsun dade ni bɛ ŋmɔlɔ ni akɛwoɔ tsɔne mli lɛ tsuɔ nii jogbaŋŋ yɛ he ko ni ŋmɔlɔ babaoo yɔɔ. Dade nibii ni hi fe fɛɛ lɛ tsiɔ ŋmei kɛ oksideshin kɛjɛɔ nugbɔ, ŋshɔ kɔɔyɔɔ kɛ kɔɔyɔɔ ni mli edɔ naa. Ehiɔ shi jogbaŋŋ yɛ gbɛjianɔtoo naa ni ekɛ ehe fĩɔ shi jogbaŋŋ afii babaoo ni baa lɛ amli. Akɛtsuɔ nii babaoo yɛ kponɔgbɛ guardrail ni akɛwoɔ mli, ŋshɔ hiɛ nibii asaamɔ kɛ ŋshɔnaa tsumaa he nitsumɔi amli.
Na Quote Oya4.Kane Hesaamɔ & Shia Hardware Saamɔ
M6 shweremɔ bolts bibii kɛ plastic shweremɔ ankɔs. Ehi kɛha shĩa kɛ jarayeli tsũi ni akɛwoɔ tsɔne mli lɛ ahe fɛofeemɔ. Nɔ ni jɛɔ mli baa lɛ, efiteee gbogbo lɛ hiɛ loo egbaŋ. Amɛhi kɛha musu ni akɛwoɔ gbogbo he, kane saamɔ, adeka mli ni akɛwoɔ mli kɛ shĩa mli nibii bibii ni akɛwoɔ mli. Amɛjara waaa ni amɛtsuɔ odaa kane ni akɛfiɔ he lɛ he hiamɔ nii fɛɛ ahe nii.
- 01
Nɔ ni ji 1: Kwɛmɔ ni okɛ bu ni sa lɛ atsu nii.
Kɛ hama ni akɛ carbide ewo mli lɛ atsu nii. Esa akɛ bu lɛ mligbɛ ŋwɛigbɛ lɛ afee nɔ ni sa kɛha ŋwɛi ŋta lɛ. Eyɛ mlɛo tsɔ ni nine lɛ mli egbɛɛɛ eshwaa, ni eyɛ ŋmɔlɔ tsɔ ni obaagbala shishigbɛ lɛ mli.KANEMƆ PII - 02
Nɔ ni ji enyɔ: Kwɛmɔ akɛ ehe tse.
Ni ajieɔ sũ lɛ. Vacuum kɛji ebaahi. Dust haa gbeekpamɔ baa shi. Ni gbeekpamɔ ji nɔ pɛ ni haa o-ankɔ lɛ hiɔ shi.KANEMƆ PII - 03
Nɔ ni ji etɛ: Too ŋwɛi ŋta lɛ.
Koni ojie bolts: Jiemɔ nuts kɛ washers lɛ. Kudɔ ankɔ lɛ kɛ ŋshɔ lɛ nɔ. Ekolɛ ehe baahia ni akɛ pɔmpi ni yɔɔ mlɛo ni akɛ hama awo mli. Kɛji akɛ okɛ shields ni haa shwereɔ shii enyɔ miitsu nii lɛ, mɔmɔ naagbee kroko lɛ ni otsi lɛ klɛŋklɛŋ.KANEMƆ PII - 04
Nɔ ni ji ejwɛ: Torque ni akɛbaatswa
Kaaha ohe miiwo mli fe nine. Kɛ torque wrench atsu nii yɛ nitsumɔi ni he hiaa waa amli. Beni okɛ ohe woɔ mli lɛ, ŋshɔŋloo lɛ mli lɛɛɔ kɛjeɔ kpo. Kpa beni ana torque ni ato lɛ.KANEMƆ PII - 05
Nitsumɔ Kuu
Gbalamɔ kɛba sɛɛ. Kɛji etsiɔ lɛ nɔ ko lɛ ejaaa. Gbalamɔ mli ni okɛwo mli ekoŋŋ. Wɔbaasumɔ ni ofite minitii enumɔ fe ni okɛ ohe awo oshara mli ni okɛ ohe awo mli.KANEMƆ PII
Gbɛtsɔɔmɔ ni kɔɔ halamɔ he (Dalɛ kome kɛ fɛɛ kpaaa gbee)
Gbɛtsɔɔmɔ ni kɔɔ halamɔ he (Dalɛ kome kɛ fɛɛ kpaaa gbee)
nɔ ni Wɔ Nihɔɔlɔi lɛ Kɛɔ-Fluff ko bɛ, Anɔkwalei kɛkɛ
"Wroclaw fɛ̃i be mli tsɔne ni akɛwoɔ mli. Kɔnkrit lɛ mli latsaa lɛ bɛŋkɛ ais. Kulɛ wɔnyɛŋ wɔshɛ wɔbe he gbɛjianɔtoo lɛ he yɛ epoxy tsamɔ be lɛ hewɔ. Yɛ no najiaŋ lɛ wɔkɛ Sinsun tsɔne ni akɛgbalaa ŋwɛi ŋtayaai lɛ tsu nii. Akɛwo mli waa. 8am Loaded. 9am. No callbacks."
"“Shields ni mlilɛɛmɔ shii enyɔ kɛha helatsamɔhe tsɔne daamɔhe gbɛjianɔtoo. Blɔki nitsumɔ lɛ su lɛ kɛ ehe kpaaa gbee—ankɔ ni yɔɔ daa lɛ tee nɔ efo. Sinsun dual‐point mlilɛɛmɔ lɛ mɔ he ni mɛi krokomɛi nyɛɛɛ amɛtsu nii yɛ lɛ. Wɔbi ni akɛ tsɛnsii enyɔ krokomɛi awo mli kɛjɛ nakai be lɛ mli. Akɛ gbii 18 tee Jebel Ali.”
"Wɔka ankɔ henɔi srɔtoi ejwɛ wɔkwɛ yɛ gbogbo ni nɔ kwɔ nɔ. Sinsun M10 dade bolts lɛ pɛ ji nɔ ni hiɛɔ torque be fɛɛ be yɛ shikpɔŋ lɛ nɔ fɛɛ. Ebɛ sɛɛkuu 500 sɛɛ. Mi-lead installer lɛ kɛɛ, 'Enɛɛmɛi shwieee shi.' No ji srɔtofeemɔ lɛ.”
Sanebimɔi ni Mɛi Pɔɔ Bimɔ
Sanebimɔ: Mɛni ji srɔtofeemɔ ni yɔɔ wedge ankɔ kɛ sleeve ankɔ teŋ?
A: Wedge anchor yɛ sɛɛgbɛtsɔɔmɔ klip kome pɛ yɛ shishigbɛ. Sleeve ankɔ yɛ nine ni mli lɛɛɔ yɛ elɛɛmɔ mli. Wedge ankɔ lɛ mli wa fe tsutsu lɛ. Sleeve ankɔs tsuɔ nii jogbaŋŋ yɛ brikii kɛ blɔki nɔ.
Sanebimɔ: Mɛni ji srɔtofeemɔ ni yɔɔ 3/16" kɛ 1/4" diamita teŋ?
A: Daabi. Asusuuu tsɔne mlilɛɛmɔ ankɔs lɛ he kɛha kɔnkrit ni egbɛ eshwa. Egbɛlɛɛmɔ baanyɛ aha ŋmeii lɛ alɛɛ diɛŋtsɛ. Nibii ni egbɛ eshwa lɛ biɔ epoxy ŋtayaai loo ŋtayaai krɛdɛɛi ni afo shishi.
Sanebimɔ: Mɛɛ torque mikɛtsuɔ nii kɛhaa M10 shweremɔ bolt?
A: 27 Nm kɛha M10 ŋwɛi ŋta ni yɔɔ kɔnkrit ni wa mli. Kwɛmɔ mɔ ni fee lɛ adafitswaa wolo lɛ mli be fɛɛ be. Kɛ́ okɛ ohe wo mli fe nine lɛ, ejieɔ kpãai lɛ, shi otso lɛ tsɔɔ akɛ omɔɔɔ mli.
Sanebimɔ: Ani abaanyɛ akɛ plastic ni akɛwoɔ ŋwɛi lɛ atsu nii ekoŋŋ?
A: Daabi. Plastic sleeve lɛ hiɔ shi ni egbɛɔ eshwaa kɛji ojie skruu lɛ pɛ. Esa akɛ otsake plɔg lɛ koni okɛwo mli ekoŋŋ.
Q. Mɛni ji jatsu ni akɛwoɔ ŋwɛi ŋta ni shwereɔ shii enyɔ lɛ he?
A: Edamɔ substrate kpakpa kɛ ekɛwomɔ nɔ. Taakɛ eji mla lɛ, ŋwɛi ŋtayaai ni shwereɔ shii enyɔ lɛ haa ŋtayaai ni ajieɔ kɛjɛɔ mli lɛ he hewalɛ ni nɔ kwɔ fe ŋtayaai ni shwereɔ shii ekome lɛ ejaakɛ jatsu lɛ gbɛɔ eshwaa ŋtayaai enyɔ nɔ.
Sanebimɔ: Ani Sinsun kɛ kusum mli tsɔnei kɛ nibii ni akɛtsuɔ nii lɛ haa?
A: Anɔkwale. Wɔjeee mɛi ni yɔɔ teŋgbɛ, shi moŋ nitsumɔhe ko ji wɔ. Okɛ omfonirii kɛ amɛyibɔ amaje wɔ. Wiemɔ yɛ ŋmɛlɛtswai 48 mli.
Sanebimɔ: Mɛɛ dalɛ mlilɛɛmɔ ankɔ lɛ sa kɔnkrit ni akɛwoɔ nɔ lɛ?
A: M6 kɛha jatsui ni waaa, M8 kɛha jatsui ni yɔɔ teŋgbɛ, kɛ M10 shweremɔ bolt kɛha kɔnkrit ni tsii ni akɛsaa. Kɛ drili bu lɛ dalɛ ato paramita okpɔlɔ lɛ he pɛpɛɛpɛ.
Sanebimɔ: Ani dade ni sɛɛ efooo lɛ baanyɛ atsu nii yɛ ŋshɔnaa hei?
A: Hɛɛ. Wɔ 304/316 dade ni sɛɛ efooo lɛ teɔ shi ewoɔ ŋshɔ mli ŋmei ni fiteɔ nii lɛ, ni ehi kɛha be kakadaŋŋ ni akɛtsuɔ nii yɛ ŋshɔnaa.
Sanebimɔ: Ani abaanyɛ akɛ expansion anchors atsu nii kɛha dade tsɔne lɛ he saamɔ?
A: Hɛɛ. Wɔ ankɔ ni akɛha kɛha dade lɛ jieɔ kpãa pɔtɛɛ ni kɛ dade plɛte ni yɔɔ shiŋŋ kɛ frem saamɔ kpãa gbee.
Ohe miihia ankɔs ni hiɛɔ. Wɔfeɔ amɛ. Eyɛ mlɛo tamɔ nakai.
Bi ni aha bo shika ŋmɛnɛ. Kɛɛmɔ wɔ otsɔne lɛ dalɛ (M6 / M8 / M10 / M12 / M16 / M20), bɔ ni eyɔɔ ha, kɛ nɔ ni yɔɔ shishigbɛ lɛ henɔ. Wɔ kɛ nitsumɔhe jara kɛ be ni akɛbaa maje bo.
Sinsun Fastener – Hewalɛ ni Akɛtsuɔ Nii Kɛha Jeŋ Muu Fɛɛ Nibii.
- Emailinfo@hbsinsun.com
- Tswaa wɔ yɛ+86-15802235005
- Wɛbsaitiwww.sin hulutsoo.com
Keep In Touch
TO KNOW MORE ABOUT Sinsun, PLEASE CONTACT US！
We are committed to providing you with the best quality service and look forward to communicating with you to solve problems together and bring you a better experience.
our experts will solve them in no time.