Ankɔ ni Akɛbaawo Mli
Flush Wo mli, Kɔnkrit Grip ni Wa.
Ankɔ ni akɛ tsɔne ebɔ he, nɔ ko nɔ ko bɛ ni jeɔ kpo yɛ nɔ.
Factory Pɛpɛɛpɛ, Be kakadaŋŋ ni Akɛfiɔ Shi.
Ankɔ ni shwieɔ shi | Flush Mount Kɔnkrit Nibii ni Akɛfiɔ He lɛ Ahe Nitsumɔhe | Hunu
Ankɔs ni akɛshwieɔ shi kɛha yiteŋ loo flɔsh kɔnkrit nibii ahe miihia? Sinsun nitsumɔhe lɛ feɔ 1/4′′ 3/8′′ 1/2′′ 5/8′′ 3/4′′ zinc & dade ni sɛɛ efooo ni akɛwoɔ mli lɛ. ETA henɔi. Nitsumɔhe jara babaoo. Jeŋ muu fɛɛ majemɔ.
Na Quote OyaAni Oyɛ Siling Nitsumɔ? Je Shi yɛ Biɛ
Atsɛɔ ŋwɛi ŋta ni shwieɔ shi lɛ hu akɛ ŋwɛi ŋta ni akɛ tsɔne ebɔ he, ŋta ni shwieɔ shi kɛ ŋta ni shwieɔ shi yɛ yoo mli. Akɛ yoo ŋtayaa nɛɛ buaa naa kɛ mligbɛ tsɔne ni haa ŋtayaa lɛ yaa hiɛ ni abaanyɛ akɛwo mli oya kɛtsɔ dɛŋdade ko ni akɛtoɔ he lɛ nɔ. 1/4 ŋwɛi ŋtayaai ni shwieɔ shi, 3/8 ŋtayaai ni shwieɔ shi, 1/2 ŋtayaai ni shwieɔ shi kɛ 3/4 ŋtayaai ni shwieɔ shi, ni haa ŋwɛi ŋtayaai ni yɔɔ mlɛo, ni yɔɔ teŋgbɛ kɛ ni tsii ni akɛsaa kɔnkrit nitsumɔi lɛ ahe kwraa. Ehi jogbaŋŋ kɛha nitsumɔi ni biɔ ni afee gbogbo ni yɔɔ tɛ̃ɛ, ni he tse ni haa shikpɔŋ lɛ nɔ tseɔ yɛ nɔ ni akɛwoɔ mli lɛ sɛɛ.
Ákɛ tsɔne ni akɛfiɔ tsɔne mli lɛ he nilelɔ lɛ, Sinsun efee tsɔnei ni akɛwoɔ tsɔne mli lɛ amli saji fitsofitso fɛɛ jogbaŋŋ koni ekɛsrɔto amɛ kɛjɛ nibii ni afɔɔ namɔ yɛ jara nɔ lɛ ateŋ. Wɔ drop-in ankɔs lɛ ji carbon dade, zinc plated kɛ stainless steel, ni fɛɛ ji kpãa ni abɔle kɛ pɛpɛɛpɛ ni amɛkpɛtɛɔ dimensional tolerans he pɛpɛɛpɛ. Wɔtsuɔ naagbai ni kɔɔ tsɔne ni etse ehe kɛ shweremɔ ni fa bɔ ni sa ni bei pii lɛ anaa yɛ nibii ni jara waaa lɛ amli lɛ ahe nii. Nibii fɛɛ ni yɔɔ mli lɛ ji tensile kɛ shear loaded ni wɔbaanyɛ wɔkɛ bespoke sizes kɛ surface treatments aha jeŋ muu fɛɛ tsumaa kɛ nitsumɔhei jarayelɔi.
Na Quote Oya
| Ankɔ dalɛ (Inch) | Thread dalɛ (UNC) | Kponɔgbɛ diamita (Inch) | Gbomɔ Bu lɛ mlilɛɛmɔ (Inch) | Ankɔ kɛlɛ (Inch) | Min. Bu lɛ mlibotemɔ (Inch) | Min. Nɔ ni akɛwoɔ mli (Inch) |
|---|---|---|---|---|---|---|
| 1/4′′ | 1/4-20 | 3/8′′ | 3/8′′ | 1′′ | 1′′ | 1′′ |
| 3/8′′ | 3/8-16 | 1/2′′ | 1/2′′ | 1-9/16′′ | 1-9/16′′ | 1-9/16′′ |
| 1/2′′ | 1/2-13 | 5/8′′ | 5/8′′ | 2′′ | 2′′ | 2′′ |
| 5/8′′ | 5/8-11 | 7/8′′ | 7/8′′ | 2-1/2′′ | 2-1/2′′ | 2-1/2′′ |
| 3/4′′ | 3/4-10 | 1′′ | 1′′ | 3-1/8′′ | 3-1/8′′ | 3-1/8′′ |
Teknik Nibii pɔtɛɛ
Thread henɔ:Maŋ lɛ mli Kɔɔyɔɔ (UNC) kɛha inchi dalɛi; ISO mɛtrik kɛha mɛtrik dalɛi
Mligbɛ tsɔne lɛ mlibotemɔ:Aaafee ankɔ lɛ kɛlɛ fɛɛ fã
Taomɔ nii:Dɛŋdade ni ato he gbɛjianɔ ni he hiaa kɛha diamita fɛɛ diamita—dɛŋdade ni ejaaa ni akɛtsuɔ nii lɛ tsɔɔ shweremɔ ni eshɛɛɛ he .
Dɔlɛ henɔ: –40°C kɛyashi +100°C (kabon dade); –40°C kɛyashi +400°C (ni bɛ muji)
Kpɛlɛmɔi: Diamond point (ni yɔɔ ŋmɔlɔ, ehaa tso mligbalamɔ baa shi yɛ tsɔne kudɔmɔ be mli).
Nibii ni akɛfee:ETA‐22‐0912 / 0913 yɛ kɛha flange mɛtrik henɔi
Kpɛlɛmɔi:120-240 nails yɛ coil kome mli (nitsumɔhe-nibii ni akɛwoɔ mli babaoo kɛha nitsumɔ jogbaŋŋ).
Jeee kɛha:Brikii, blɔki ni mli ewo muji, CMU, drywall, tso, loo nɔ fɛɛ nɔ ni yɔɔ blɛoo
Na Quote Oya| Thread Dalɛ | Bu lɛ mlilɛɛmɔ (mm) | Ankɔ kɛlɛ (mm) | Min. Bu mlibotemɔ (mm) | Torque ni ajieɔ yi (Nm) | Gbalamɔ Jatsu (kN) C20/25 Kɔnkrit |
|---|---|---|---|---|---|
| M6 | 10 | 25 | 30 | 8 | 2.7 |
| M8 | 12 | 30 | 40 | 15 | 3.3 |
| M10 | 14 | 40 | 50 | 17 | 5.0 |
| M12 | 16 | 50 | 55 | 35 | 7.6 |
| M16 | 20 | 60 | 65 | 60 | 10.2 |
He ni Okɛbaatsu Nii Diɛŋtsɛ -lɛlɛAnkɔs ni akɛwoɔ mlilɛ
1. Drop‐in anchor kɛha paipii ni yɔɔ ŋwɛi ni akɛkpɛtɛɔ kɔnkrit ŋwɛitsu lɛ nɔ
Oyɛ elevator ko mli ni kɛlɛ ji ninetalɔi 30 kɛyaa ŋwɛi. Siling lɛ ji kɔnkrit ni wa. Eheɔ nɔ ni miihe ashɛ pound 500 ni tsiimɔ yɔɔ mli koni akɛfɔ̃ tsɔne ni akɛshwieɔ nu nɔ ni dalɛ ji 6 inch ni nu eyi mli obɔ lɛ nɔ. Esa akɛ tso ni akɛ tsɔne ebɔ he lɛ aya ŋwɛitsu lɛ mli, shi osumɔɔɔ ni ejɛɔ mli dani ofeɔ klalo. Akɛ ŋwɛi ŋtayaai ni shwieɔ shi lɛ tsuɔ enɛ he nii. Gbalamɔ bu lɛ, ni okɛ dɛŋdade lɛ ato ŋwɛi ŋta lɛ he. Amrɔ nɛɛ oyɛ mligbɛ tsɔne ni okɛbaahe otso lɛ. Ku osɛɛ kɛ tso lɛ aba ni okɛ kpãa atsɔ mli. Kɛ opaipi lɛ afɔ shi. Akɛ shishigbɛ ŋtayaa ko bɛ. Nakai kɔnkrit sũ lɛ eko bɛ ohiɛ. Wɔkɛ mɛi ni tsuɔ nii kɛgbeɔ la, HVAC duct nitsumɔ kɛ tsɔne ni akɛwoɔ tsɔne mli lɛ eha yɛ jarayeli nitsumɔi babaoo amli.
Na Quote Oya
2. Drop‐in anchor kɛha tsɔnei ni tsii ni yɔɔ nitsumɔhei lɛ ashishi
Nitsumɔhe lɛ shikpɔŋ lɛ nɔ feɔ ŋmɔlɔŋmɔlɔ. Vibration ni jɛɔ stamping tsɔne lɛ mli. Lift lɔle ni tswaa jatsui. Naagba ni yɔɔ ŋwɛi ŋtayaai ni akɛwoɔ ŋwɛi ŋtayaai amli lɛ ahe ji akɛ, amɛbaanyɛ amɛgbala amɛhe fiofio kɛji akɛ amɛwo amɛhe be fɛɛ be. Nɔ ni tamɔɔɔ ŋwɛi ŋtayaai ni akɛwoɔ mli lɛ, ŋtayaai ni akɛwoɔ mli lɛ tsuɔ nii yɛ gbɛ ni yɔɔ srɔto nɔ, ejaakɛ ŋtayaai ni yɔɔ mli lɛ haa gbɔmɔtso lɛ kɛ bu lɛ gbogboi lɛ kpaa gbee daa. Ankɔ lɛ eba shi ni ekɛ ehe kpaaa gbee. Anaa nɛkɛ ŋwɛi ŋtayaai nɛɛ yɛ tsɔnei kɛ niyenii ahe nitsumɔhei kɛha tsɔnei ahe nibii, nibii ni akɛwoɔ tsɔne mli, kɛ nibii ni akɛwoɔ tsɔne mli ni tsii.
Na Quote Oya
3. kɔnkrit tɛ kɛ blɔki ni wa yɛ tsumaa he
Tɛ ni akɛwoɔ mli. GBƆŊI NI TSƆƆ HE TSƆƆ - Gbogboi ni yɔɔ momo ni akɛ ŋtayaai ni akɛwulaa amɛhe efata he. Mla lɛ yɛ mlɛo: ŋwɛi ŋta ni akɛwoɔ mli lɛ tsuɔ nii jogbaŋŋ kɛji akɛ shishigbɛ ŋta lɛ mli wa ni etsa. Shi ŋaawoo ko nɛ - kɛji akɛ okɛ tɛ loo blɔki ni ekolɛ ehiɛ ŋmɔlɔ ni kɛ ehe kpaaa gbee miitsu nii lɛ, kɛ dade ni akɛwoɔ mli ni akɛwoɔ mli ni akɛwoɔ mli lɛ atsu nii. Knurling lɛ mɔ̃ɔ bu ko gbogbo lɛ jogbaŋŋ fe gbɔmɔtso ni yɔɔ ŋmɔlɔŋmɔlɔ. Wɔkɛ enɛɛmɛi eha kɛha marble tɛi ni yɔɔ hotɛl shĩai lɛ amli, blɔkii ni wa kɛha park sɛii kɛ kɔnkrit kanei ni akɛwoɔ maŋ lɛ gbɛjegbɛi lɛ anɔ lɛ.
Na Quote Oya
4. tsɔne ni akɛtswaa tsɔne kɛ tsɔne ni akɛtsakeɔ tsɔne lɛ nɔ
La tsuji ji hei ni agu. Transforma lɛ tsii. Esa akɛ akɛ mitai kɛ switchgear akpɛtɛ kɔnkrit gbogboi ahe ni akatsɔ fã kroko lɛ mli. 1/2” drop-in anchor yɛ hewalɛ ni ekɛhiɛɔ wedge anchor, shi eyɛ ŋmɔlɔŋmɔlɔ kwraa. Ekɛ panel shinaai kpaaa gbee. Kpãa ko bɛ ni ajieɔ lɛ kpo ni akɛbaamɔ ŋaalɔ nine. Elektrik nitsumɔhei lɛ sumɔɔ amɛ ejaakɛ amɛbaanyɛ amɛto amɛ anchor hei lɛ fɛɛ dani panel lɛ aba he lɛ e. .
Na Quote Oya-
Nɔ ni ji 1 - Tsɔɔmɔ bu.
Kɛ hama ni akɛfoɔ nii kɛ carbide ni akɛ ŋwɛi ŋta ni dalɛ tamɔ ŋta lɛ kponɔgbɛ ŋta lɛ nɔŋŋ atsu nii. No ji 3/8" bibioo kɛha 1/4" ŋwɛi ŋta ni shwieɔ shi. Kɛha 3/8” nibii ni baa shi. Kɛ 1/2” atsu nii. Drill ni damɔ shi shiŋŋ kɛya ŋwɛi. Kaaha drill lɛ miiho, ni okɛ bu lɛ mli atse fe bɔ ni spec gbeɔ hewalɛ ni hiɛɔ lɛ.kanemɔ babaoo -
Nɔ ni ji enyɔ – Na mlibotemɔ lɛ jogbaŋŋ.
Esa akɛ bu lɛ mli kwɔ kɛ ŋwɛi ŋta lɛ kɛlɛ lɛ nɔŋŋ. Ankɔ lɛ kɛ kɔnkrit lɛ nɔ lɛ kpãa gbee kɛji akɛ awo mli kwraa. Kadimɔ o-drill bit lɛ kɛ teepu yɛ he ni sa. Kɛha 2 inch kɛlɛ 1/2” drop‐in ankɔ drill 2 inch mlibotemɔ.kanemɔ babaoo -
Nɔ ni ji etɛ – Tsumɔ bu lɛ mli jogbaŋŋ.
Kɛ kɔɔyɔɔ ni mli wa atsu nii ni okɛfo sũ lɛ. Kɛ nylon brɔsh atsumɔ sɛɛgbɛ gbogboi lɛ ahe. Vacuum kɛji eyɛ. Muji ji gbeekpamɔ henyɛlɔ, ni gbeekpamɔ haa ŋshɔkei ni shwieɔ shi lɛ hiɔ shi yɛ he ni eyɔɔ lɛ.kanemɔ babaoo -
Nɔ ni ji ejwɛ – Okɛ ŋwɛi ŋta lɛ ato.
Okɛ ŋwɛi ŋta lɛ awo bu lɛ mli, ni okɛ tsɔne awo naagbee lɛ nɔ. Nyɛɛ nɔ fioo bɔni afee ni ŋwɛigbɛ lɛ kɛ kɔnkrit lɛ nɔ afee ekome, loo ehi shi pɛ.kanemɔ babaoo -
– Okɛ dɛŋdade ni sa lɛ atswa ŋwɛi ŋta lɛ.
Skruu gbɛjianɔtoo dɛŋdade ni ajɔɔ nɔ aha lɛ awo ŋwɛigbɛ. Okɛ hama atswa dɛŋdade lɛ. Kɛji akɛ dɛŋdade lɛ ehi shi jogbaŋŋ lɛ, esa akɛ dɛŋdade lɛ tsitsi lɛ kɛ ŋwɛi ŋta lɛ abɔ he. Obaanu bɔ ni egbɛ eshwa lɛ he. Ankɔs lɛ mlilɛɛɛ kɛji akɛ dɛŋdade ko bɛ ni akɛtoɔ he.kanemɔ babaoo -
– Okɛ o-bolt loo tso lɛ awo mli.
Amrɔ nɛɛ, ŋshɔ lɛ efee klalo kɛha tsɔne ni akɛwoɔ tsɔne mli lɛ. Kɛ o-bolt loo threaded rod kɛ torque awo mli kɛyashɛ he ni atsɔɔ lɛ. Kaatsi ohe fe nine ejaakɛ torque ni fa fe nine baanyɛ ajie mligbɛ tsɔji lɛ.kanemɔ babaoo
| Nɔ ni yɔɔ shishi | Ankɔ Henɔ ni hi fe fɛɛ | Drop‐In Ehi? | Mɛni Hewɔ / Mɛni Hewɔ Jeee |
|---|---|---|---|
| Kɔnkrit ni wa (yiteŋ) | Ankɔ ni akɛwoɔ mli | HƐƐ | Flush gɔŋ. Hardware ko bɛ ni jeɔ kpo. Mligbɛ tsɔji ni asaa he kɛha tso. |
| Kɔnkrit ni wa (shikpɔŋ / gbogbo) | Wedge ankɔ loo gbee‐botemɔ mli | HƐƐ | Wedge kɛha jatsu ni nɔ kwɔ ni hiɔ shi daa; drop‐in kɛji ehe miihia ni ojie bolt lɛ sɛɛ mli. |
| Kɔnkrit ni egbɛ eshwa | ETA‐ni ato he gbɛjianɔ loo tsofa ni akɛwoɔ mli | Hɛɛ (kɛ ETA kpɛlɛmɔ) | Asusuuu drop‐ins ni yɔɔ ŋmɛnɛ lɛ he kɛha kɔnkrit ni egbɛ eshwa. Bi wɔ ETA‐ni ato he gbɛjianɔ lɛ. |
| Brikii loo blɔki ni wa | Sleeve ankɔ | DAABI | Drop‐in anchors biɔ kɔnkrit ni mli wa, ni yɔɔ ekome koni ekɛgbala mli. Brikii srɔtoi babaoo. |
| Blɔki ni mli ewo muji / CMU | Toggle bolt loo gbogbo ni yɔɔ ŋwɛi | DAABI | Nibii ni wa bɛ kɛha mligbɛ shweremɔ. Drop‐in baatsake. |
| Gbogbo ni egbi / plastabɔd | Tsɔmɔmɔ bɔlt loo moli bɔlt | DAABI | Ankɔs ni akɛwoɔ mli lɛ tsuuu nii yɛ drywall mli. Nɔ ni yɔɔ shishi lɛ bɛ hewalɛ ni haa mɔ tsui nyɔɔ emli. |
| Kpo nɔ / ŋshɔ hiɛ | Dade ni bɛ ŋmɔlɔ ni akɛwoɔ mli | HƐƐ | 304 kɛha kponɔgbɛ nibii fɛɛ. 316 kɛha ŋmei nu ni ajieɔ lɛ kpo. |
| Shihilɛ ni hosoɔ waa | Nɔ ni akɛwoɔ mli (ni akɛwo mli) loo epoxy | Hɛɛ (akpokpo) | Knurled gbɔmɔtso lɛ teɔ shi ewoɔ sɛɛkuu ni shwieɔ shi jogbaŋŋ fe gbɔmɔtso ni yɔɔ ŋmɔlɔŋmɔlɔ. |
Nɔ ni Wɔ Nihɔɔlɔi lɛ Miikɛɛ
Nibii ni akɛwoɔ ŋshɔ hiɛ lɛ náa nibii babaoo ni ataoɔ yɛ Middle East, Central Asia kɛ Southern Europe jarayeli hei lɛ. Wɔ halaa be kakadaŋŋ nitsumɔ hetoo kɛjɛ hei etɛ koni wɔ tsɔɔ nibii ni tsuɔ nii diɛŋtsɛ:
“
“Wɔmiikɛ la ni akɛshwieɔ shi lɛ miiwo nitsumɔhe tsũ ko ni yɔɔ tsũi 12 mli. Kɔnkrit ŋwɛitsu, 3/8” ŋwɛi ŋtayaai ni shwieɔ shi, paipi ni akɛ tsɔne fĩɔ shi. Klɛŋklɛŋ lɛ wɔka akaŋshilɔ ko ŋshɔkei lɛ wɔkwɛ—enumɔ yɛ oha mli shwieɔ shi beni wɔkɛ torque tswaa lɛ. Atsake kɛtee Sinsun nɔ. Ejeee nɔ kome ni eyeee omanye yɛ ŋshɔkei 450 mli. Mihii lɛ kpa bui ni amɛfoɔ ekoŋŋ lɛ. No ji otsi ni akɛto gbɛjianɔtoo lɛ he.”
“
“Ŋshɔnaa nitsumɔ yɛ Abu Dhabi. Nɔ fɛɛ nɔ fiteɔ yɛ nyɔji enumɔ mli kɛji akɛ jeee ŋshɔ hiɛ nɔ. Wɔbi ni akɛ dade ni bɛ ŋmɔlɔ ni akɛwoɔ ŋshɔ mli lɛ aha Sinsun—1/2′′ kɛ 5/8“ dalɛi. Afii enyɔ sɛɛ lɛ, minyiɛ he ni afeɔ lɛ yɛ lɛ. Korɔshin ko bɛ. Nibii ni akɛtoɔ he gbɛjianɔ lɛ kɛ amɛhe kpãa gbee jogbaŋŋ lolo. Wɔkɛ nibii ni wɔkɛbaatsu nii lɛ etsu nii shii etɛ kɛjɛ nakai be lɛ mli.”"
“
“Wɔ dadefeelɔ ni yɔɔ Poland lɛ jie Sinsun yi yɛ sɛɛ mli nibii gbohii ni jɛ nihɔɔlɔ kroko ŋɔɔ lɛ sɛɛ. Wɔmiitao M12 drop‐in anchors kɛha dade shishitoo plɛtei ni yɔɔ nitoohe ko mli lɛ. loose fits lɛ mli tsɔne he nilelɔ lɛ kɛ enine wo shishi yɛ klɛŋklɛŋ kwɛmɔ lɛ mli.”
Sanebimɔi ni Mɛi Pɔɔ Bimɔ
Sanebimɔ: Mɛni ji ŋwɛi ŋta ni shwieɔ shi?
KO:Yitso nɔ tsɔne ni akɛwoɔ tsɔne mli. Yei ankɔ hei ni akɛmamɔ kɔnkrit shikpɔŋ kɛ ŋwɛitsu nɔ. He fɛɛ he ni osumɔɔ bolt bu ni ejeee kpo yɛ ŋwɛi lɛ nɔ.
Sanebimɔ:Mɛɛ tsɔne ni akɛfoɔ nu lɛ dalɛ ji kɛha 3/8" drop‐in ankɔ?
KO: 1/2” bit. Drill hole lɛ mlijaa ji ŋwɛi ŋta lɛ kponɔgbɛ ŋta, shi jeee mligbɛ ŋta lɛ dalɛ.
Sanebimɔ:Ani obaanyɛ okɛ ŋwɛi ŋta ni shwieɔ shi lɛ awo brikii loo blɔki ni mli ewo muji mli?
KO: Dabi, afee ŋwɛi ŋtayaai ni akɛwoɔ mli lɛ aha kɔnkrit ni wa pɛ. Brikii kɛ blɔki kɛ amɛhe kpaaa gbee tsɔ. Mohu ɔ, ngɔ slivi ankɔ loo toggle bolts kɛ tsu ní.
Sanebimɔ: Mɛni ji srɔtofeemɔ ni yɔɔ ŋshɔŋloo ni shwieɔ shi kɛ ŋshɔŋloo ni shwieɔ shi lɛ teŋ?
KO: Drop-in anchors ji ankɔs yei (mligbɛ tsɔnei) ni ta shi pɛpɛɛpɛ kɛyaa ŋwɛi. Wedge anchors ji anchors hii (threaded studs ni jeɔ kpo kɛjɛɔ ŋwɛi) ni yɔɔ kponɔgbɛ ŋwɛi ŋta.
Sanebimɔ: Ani dade ni akɛwoɔ ŋwɛi ŋtayaai amli lɛ jara wa akɛ awoɔ nyɔmɔ kroko?
KO: Hɛɛ, kɛji akɛ ŋmɔtɔ yɛ mli. 304 dade ni bɛ ŋmɔlɔ lɛ hi kɛha shĩa mli hulutsoo loo kponɔgbɛ nitsumɔ yɛ bei komɛi amli. 316 dade ni bɛ ŋmɔlɔ lɛ hi kɛha ŋshɔnaa loo tsofafeemɔ he shihilɛi.
Sanebimɔ:Te esa akɛ bu lɛ mli kwɔ ha tɛŋŋ kɛha ŋshɔkei ni shwieɔ shi lɛ?
KO:Ankɔ lɛ kɛlɛ ji pɛpɛɛpɛ. Gbalamɔ 2 inches mli kɛha 2‐inch kɛlɛ 1/2” ŋwɛi ŋta ni baa shi.
Sanebimɔ:Ani manyɛ majie ŋwɛi ŋta ni shwieɔ shi lɛ kɛji mikɛto sɛɛ?
KO:Jeee kɛji oosumɔ ni ofite kɔnkrit lɛ. Nɔ ni hiɔ shi daa ji drop‐in ankɔs. Mligbɛ mlilɛɛmɔ lɛ nyɛŋ aku sɛɛ aba. Gbalamɔ bu kroko yɛ emasɛi.
Sanebimɔ:Mɛɛ torque he hiaa kɛha M10 ŋwɛi ŋta ni shwieɔ shi lɛ?
A:17 Nm kɛha dade ni ji carbon M10 yɛ kɔnkrit C20/25 mli. Kwɛmɔ nibii pɔtɛɛ ni yɔɔ wɔ torque okpɔlɔ ni yɔɔ ŋwɛi nɛɛ nɔ.
Sanebimɔ:Ani Canon yɛ ETA-he odaseyeli ni akɛwoɔ mli lɛ?
A: Anɔkwale. Wɔ flanged mɛtrik shwiemɔ ŋwɛi ŋtayaai ji ETA-22-0912 kɛ ETA-22-0913 ni ato he gbɛjianɔ kɛha kɔnkrit ni etse kɛ nɔ ni etseee nitsumɔi.
Sanebimɔ:Mɛni ji jatsu ni yɔɔ 1/2” ŋshɔkei ni shwieɔ shi lɛ he?
A:Kɛha dade ni ji carbon ni yɔɔ kɔnkrit C20/25 ni etseee mli ni 2 inch yɔɔ mli lɛ, jatsu ni ajieɔ kɛjɛɔ mli lɛ feɔ aaafee 7.6 kN (760 kg). Na wɔ kɛha data wolo lɛ fɛɛ kɛha onitsumɔ lɛ.
Sanebimɔ:Sanebimɔ: Ani oyɛ Sunsun tsɔne lɛ dalɛi ni okɛtsuɔ nii?
A: Wɔkɛ UNC kɛ mɛtrik thread lɛ toɔ. Custom runs lɛ yɛ yɛ yibɔ ni baa shi fe fɛɛ mli. Kɛ omfoniri lɛ amaje wɔ
Keep In Touch
TO KNOW MORE ABOUT Sinsun, PLEASE CONTACT US！
We are committed to providing you with the best quality service and look forward to communicating with you to solve problems together and bring you a better experience.
our experts will solve them in no time.