Tsofa Ankɔs
Bond Hewalɛ ni Nɔ Kwɔ, Haomɔ ni Baahe Mli.
Nɔ ni Enyɛɔ Efiteɔ, Jatsui ni tsii ni yɔɔ Shweshweeshwe.
Ankɔs ni Anyɛɔ Akɛ He Fɔ̃ɔ Nɔ Kɛha Shihilɛi ni Mli Wa.
Sinsun Nitsumɔhe lɛ Tsofa Ankɔs | Bolt ni akɛkpɛtɛɔ nii ahe ni he wa waa kɛha Kɔnkrit kɛ Masonry
Ani otaoɔ mɔ ko ni anyɛɔ akɛ he fɔ̃ɔ enɔ ni feɔ tsofa-kɛ-ŋma kɛha tsumaa loo nitsumɔhei nitsumɔi? Sinsun nitsumɔhe lɛ kɛ epoxy ni he wa waa, vinylester kɛ polyester ŋtayaai ni yɔɔ ETA-grade hewalɛ ni akɛfiɔ he lɛ haa. Na jara tɛ̃ɛ kɛjɛ China — be ni akɛyaa oya, jeŋ muu fɛɛ majemɔ.
Na Quote Oya
Tsofa mli ŋtayaai, ni ale lɛ hu akɛ tsofai ahe ŋtayaai, ŋtayaai ni akɛkpɛtɛɔ nii ahe loo ŋtayaai ni akɛ sũ fĩɔ nii ahe lɛ ji gbɛjianɔtoi ni tsuɔ nii jogbaŋŋ ni akɛ tsofa kɛ sũ ni akɛkpɛtɛɔ nii ahe lɛ tsuɔ nii kɛfiɔ ŋtayaai ni akɛ tsɔne ebɔ he, ŋtayaai kɛ ŋtayaai kɛ tɛi ahe. Nɔ fɛɛ nɔ ji threaded stud, tsofa-kɛ-ŋma, nut kɛ washer ni feɔ tsakpaa ni hiɔ shi daa, ni haomɔ ko bɛ he ni mli wa fe tsɔne ni akɛwoɔ mli lɛ.
Akɛ dade ni hi jogbaŋŋ kɛ epoxy/vinylestester resin ni atsake lɛ feɔ Sinsun tsofa-kɛ-ŋma lɛ koni ekɛ hewalɛ ni haa mɔ he waa 20% fe nitsumɔhe lɛ shishitoo mlai lɛ. Wɔ ŋshɔkei lɛ nyɛɔ amɛshiɔ shikpɔŋhosomɔ waa, amɛyɛ ŋshɔnaa sɛɛjɛkɛmɔ ni baa shi ni amɛhiɔ shi yɛ hulutsoo, fɛ̃i loo ŋshɔnaa shihilɛi amli. Wɔnyɛmɔ ni wɔkɛ nitsumɔ ni anyɛɔ akɛ he fɔ̃ɔ nɔ kɛ nibii ni hi jogbaŋŋ ni yaa nɔ daa lɛ haa, yɛ be mli ni wɔkwɛɔ nibii fɛɛ ni afeɔ lɛ nɔ lɛ haa wɔfeɔ mɛi ni sa jogbaŋŋ kɛha nitsumɔi ni he hiaa waa fe mɛi ni kɛ nibii ni akɛhaa lɛ haa lɛ.
| Tsofa Ankɔ henɔ | Resin tsofafeemɔ | Ehi Fe Fɛɛ Kɛha | Oyaiyeli & Tsamɔ Sui |
| Poliester Tsofa He Ankɔ | Polyester ŋmɔtɔ ni bɛ ŋmɔtɔ | Jatsui ni waaa kɛyashi teŋgbɛ yɛ kɔnkrit ni wa, brikii, tɛ mli | Oya tsamɔ (min 5–10 gel be), yiŋtoo ni akɛtsuɔ nii daa |
| Epoksi Akrilɛt / Vinilɛsta Ankɔ | Epoksi akrilɛt / vinilesta ŋmei | Jatsui ni yɔɔ teŋ kɛyashi nɔ ni nɔ kwɔ, kɔnkrit ni egbɛ eshwa, bu ni mli efɔ, tsofa ni akɛwoɔ mɔ mli | Hewalɛ kɛ tsamɔ oyaiyeli ni ja jogbaŋŋ; styrene bɛ mli nibii ni yɔɔ |
| Epoxy Ankɔ krɔŋŋ (Nitsumɔ-Nɔ-Wɔ) | 100% epoksi tsofa | Jatsui ni tsii, dade ni akɛwo mli sɛɛ, gbɛjegbɛi wuji (bu ni akɛ ojarawatɛi efo), shikpɔŋhosomɔ hei | Tsamɔ ni yaa blɛoo fe fɛɛ, hewalɛ ni nɔ kwɔ fe fɛɛ, shrinkage fioo, tsofa ni nyɛɔ eshiɔ tsofa |
| Hybrid gbɛjianɔtoo Ankɔ | Epoksi + vinilesta / uretan ni akɛfee ekome | Nitsumɔi srɔtoi ni biɔ hewalɛ ni nɔ kwɔ kɛ tsamɔ be ni sa fɛɛ | Oyaiyeli ni yɔɔ teŋgbɛ; nitsumɔi yɛ substrate henɔi srɔtoi amli |
| Kapsul Tsofa Ankɔ | Resin ni akɛwo mli momo (polyester/epoxy) + kuats ni abua naa yɛ glase mli | Oya ni akɛwoɔ mli ni injection tu bɛ mli; ni hi jogbaŋŋ kɛha nibii asaamɔ nitsumɔi kɛ ŋwɛitsu nɔ nitsumɔi | Gbɛ ni yɔɔ mlɛo ni atsɔɔ nɔ ashɛɔ-boteɔ mli ni atsakeɔ; gbee kaplɛ kɛ ankɔ tso |
Nɔ ko ni aŋma oya kɛjɛ wɔ niiashikpamɔ lɛ mli: kɛji akɛ ootswa ŋshɔ lɛ yɛ kɔnkrit ni egbɛ eshwa loo shikpɔŋhosomɔ hei lɛ, tsɔ polyester nɔ ni oya epoxy loo vinylester krɔŋŋ lɛ nɔ tɛ̃ɛ. Srɔtofeemɔ ni yɔɔ shika ni akɛwoɔ hiɛ lɛ mli lɛ faaa kwraa kɛ akɛto kaa ni ajieɔ kɛjɛɔ mli ni yeee omanye lɛ he.
| Stud Dalɛ (Tsofa Ankɔ) | Max. Etsilɛ ni akɛfiɔ he (mm) | Bu lɛ mlilɛɛmɔ ni ajieɔ yi (mm) | Bu ni mli kwɔ fe fɛɛ (mm) |
| M8 x 110 | 16 | 10 | 80 |
| M10 kɛ 130 | 22 | 12 | 90 |
| M12 kɛ 160 | 30 | 14 | 110 |
| M16 kɛ 190 | 38 | 18 | 125 |
| M20 kɛ 260 | 70 | 25 | 170 |
| M24 kɛ 300 | 65 | 28 | 210 |
| M30 kɛ 380 | 70 | 35 | 280 |
| M36 kɛ 420 | 85 | 40 | 330 |
| M42 kɛ 500 | 100 | 45 | 380 |
01
Matiria
Kabon dade (ni akɛ dade fee), dade ni bɛ ŋmɔlɔ 304/316
02
Resin henɔ
Epoksi ni atsake, vinilɛsta, poliɛsta
03
Hewalɛ He Gbɛjianɔtoo
4.8, 5.8, 8.8 (kabon dade)
Teknik Paramitai
04
Dɔlɛ He
-5°C kɛyashi +40°C (ni ji shishitoo mla); -20°C kɛyashi +80°C (krɛdɛɛ)
05
Tsamɔ Be
20-40 minitii (25°C), ŋmɛlɛtswai 12-24 tsamɔ ni yeɔ emuu
06
Woji ni tsɔɔ mɔ he odase
ISO 9001, ETA (kɛji oosumɔ)
-
Dade Kolum Shishitoo He Saamɔ
- Wɔnaa enɛ be fɛɛ be: Kɔnkrit shishitoo biɔ ni akɛ dade ŋwɛitsu awo mli. Mɛkanikal ni akɛgbalaa ŋwɛi ŋtayaai lɛ yɛ naagbai ni bɛŋkɛɔ ŋwɛi ŋtayaai lɛ ahe ni amɛgbalaa kɔnkrit yɛ ŋtayaai ni naa wa shishi. Tsofai ni akɛwoɔ ŋtayaai amli —ni ji epoxy ni he tse lɛ —jaa jatsui lɛ pɛpɛɛpɛ ni ehaa dade ŋtayaai lɛ damɔ shi shiŋŋ afii nyɔŋmai abɔ ni akɛtsu nii kɛ naji ahe nitsumɔ. Wɔ shikatsɛ lɛ tsake kɛjɛ Hilti kɛtee Sinsun mli beni ekwɛ pull-out kaa he amaniɛbɔɔ kɛha nitoohe nitsumɔ ko ni yɔɔ Melbourne lɛ sɛɛ. Ehe jara ba shi 32% ni akɛma yɛ grade 8.8 stud kɛ epoxy resin chemistry kome too lɛ nɔŋŋ nɔ, shi shikpɔŋ lɛ nɔ jara ba shi 32%. Tsu lɛ mlikwɛlɔ lɛ kpɛlɛ ŋwɛi ŋwɛi fɛɛ ŋwɛi ŋwɛi.
-
Rebar ni akɛwo mli sɛɛ
- Bei pii lɛ, nitsumɔi ni akɛsaa tsũi lɛ biɔ ni akɛ kɔnkrit gbogboi heei awo sũi ni yɔɔ momo lɛ anɔ. Gbalamɔ slab lɛ mli, otsumɔ bu lɛ mli, okɛ resin lɛ awo mli, ni okɛ rebar lɛ awo mli. 24–48 ŋmɛlɛtswai sɛɛ lɛ, tsofa ni akɛwoɔ mli lɛ eyi obɔ kɛ wɔ vinylester injection mortar lɛ ji nɔ ni ETA-kpɛlɛ nɔ kɛha rebar tsakpaai yɛ kɔnkrit ni etse kɛ nɔ ni etseee lɛ mli. Akɛ tsofai ni akɛwoɔ tsɔne mli ni ji M20 Sinsun 800 lɛ wo Mumbai metro tsɔnei adaamɔhei lɛ eko mli ekoŋŋ koni akɛtswa gbogboi ni akɛfoɔ tsɔne lɛ he lɛ. Ankɔs fɛɛ ho random pull-out kaa ni fe 45kN nɔ.
-
Facade Musu Gbogbo kɛ Klading Saamɔ
- Ehe miihia ni akɛ muji ni akɛwoɔ gbogbo he lɛ akpɛtɛ tsu lɛ naa he ni kɔnkrit lɛ mli etse ni tsɔne ni akɛfiɔ ŋwɛi ŋta lɛ kɛ ŋwɛi ŋta baa lɛ. Enɛ jɛ tsofa-kɛ-ŋma ankɔ lɛ mli zero-expansion stress lɛ hewɔ. Kɛji akɛ okɛ dade ni bɛ ŋmɔlɔ fata polyester resin he lɛ, onine shɛɔ ŋmeii ni nyɛɔ eshiɔ ŋmeii kɛ hewalɛ ni anyɛɔ akɛ he fɔ̃ɔ nɔ, kɛji akɛ eyɛ 50mm kɛjɛ kɔnkrit ŋwɛigbɛ po. 110 studs pɛ kɛ aluminum cladding attachments fɛɛ tsuɔ nii. Be ko ni eho lɛ, tsɔne he nilelɔ lɛ ekpoo tsofai krokomɛi etɛ ni kɛ tsofai ni akɛwoɔ mli lɛ haa lɛ yɛ tsɔne ni akɛwoɔ mli lɛ mli ŋmɔlɔi ni kɛ amɛhe kpaaa gbee lɛ hewɔ. Amɛ klɛŋklɛŋ kuu lɛ ho kwɛmɔ mli.
-
Bridge Barrier & Gbɛjegbɛ Shweshweeshwefeemɔ Oketeke Shishitoo
- Kɔɔyɔɔ kɛ tsɔnei ni tswaa gbɛjegbɛi wuji lɛ ahe gbɛtsii nii lɛ tswaa be fɛɛ be. Ankɔs ni akɛkpaa lɛ shwieɔ shi yɛ be kɛ bei amli. Kemikal ankɔ lɛ efeee nakai. Kɛha blɔji ni tsɔne ni haa mɔ he jɔ̃ɔ ehe lɛ he hiaa waa lɛ, susumɔ he akɛ okɛ hybrid loo pure epoxy resin baatsu nii. Yɛ afi ni eho nɛɛ mli lɛ, German gbɛjegbɛi lɛ anɔ saamɔ kuu lɛ tsake kɛtee Sinsun tsofa-kɛ-ŋma ŋtayaai anɔ kɛha ŋtayaai ni akɛbuɔ he lɛ. Nɔ ni jɛ tsɔne ni akɛtswaa tsɔne lɛ he kaa mli ba ji akɛ, wɔ tsofa ni akɛwoɔ tsɔne mli lɛ nyɛɛɛ ajie tsɔne lɛ, etamɔɔɔ akaŋshilɔ ko nibii ni baa shi lɛ.
-
Mashinii ni tsii kɛ nitsumɔhe nibii ni akɛwoɔ mli
- Press brekis, CNC tsɔnei ahe nitsumɔhei, tsɔnei ni akɛwoɔ tsɔne mli -- Nɛkɛ kooloi wuji nɛɛ tswaa gbee be fɛɛ be beni amɛtsuɔ nii lɛ. Mɛkanikal ankɔs kɛ vibration yaa kɔnkrit slab lɛ nɔ, ni bei pii lɛ ekɛ mligbalamɔi baa. Tsofai ni akɛwoɔ ŋwɛi lɛ ŋmɛɔ ni egbɛɔ shikpɔŋhosomɔ ni yɔɔ resin lɛ mli lɛ eshwaa. Yɛ Thailand lɛ, Tier 1 tsɔnei ahe nitsumɔhe ko kɛ Sinsun M16 tsofa-kɛ-ŋma 2,000 tsuɔ nii daa afi kɛtswaa tsɔnei ashishitoo lɛ. Mɔ ni kwɛɔ amɛ nibii anɔ lɛ kɛɛ wɔ akɛ: “Wɔka tsofai krokomɛi etɛ ni akɛwoɔ ŋtayaai amli lɛ wɔkwɛ. "Shi onɔ̃ lɛ yɛ torque ni sɛɛ tsɛɔ fe fɛɛ."
-
Gbɛmɔ Bu
diamita kɛ emlibotemɔ tamɔ ankɔ. (nɔkwɛmɔnɔ M12→14mm ŋtayaa, 115mm mlibotemɔ)
-
Buu ni He Tse
Brush kɛ kɔɔyɔɔ tsɔne ni akɛjieɔ sũ/muji. Kɛji akɛ atsuuu he jogbaŋŋ lɛ, hewalɛ lɛ baa shi 50%.
-
Kɛ Kapsul awo mli
Kɛ tsofa awo bu ni mli tse mli (glase naagbee klɛŋklɛŋ)
-
Drive Stud
Tsɔ stud awo bu mli kɛ srawa hewalɛ drili, gbee kapsul kɛ resin futumɔ.
-
Tsamɔ Ha
Tsamɔ Ha tsamɔ be fɛɛ dani okɛwo mli (25°C: ŋmɛlɛtswai 24).
-
Tsɔɔmɔ torki lɛ mli
nut kɛyashi shishitsɔɔmɔ ni atsɔɔ mli (tamɔ M12: 50–55Nm).
01
Kɔnkrit Shihilɛ
Nɔ ni etseee→bar ni ja; egbɛ eshwa→efo shishi.
02
Maamii
Shia mli→poliɛsta; kpo nɔ/
ŋshɔnaa→epoxy/316 ni bɛ ŋmɔlɔ.
ŋshɔnaa→epoxy/316 ni bɛ ŋmɔlɔ.
03
Dɔlɛ
Nɔ ni yaa nɔ daa (-5°C~40°C)→nɔ ni sa; fɛ̃i (
04
Jatsu lɛ Hegbɛ
La→M8/M10; tsii→M16+ (jatsu ni tsii waa).
Nɔ ni Wɔ Nihɔɔlɔi lɛ Kɛɔ — Hetoo Diɛŋtsɛ ni Jɛ Nitsumɔi Diɛŋtsɛ Mli
Mihe fee mi oya akɛ mikɛ tsofa ni akɛwoɔ ŋwɛi ŋta ni jɛ China lɛ baatsu nii yɛ bɔ ni shihilɛ lɛ hi ha yɛ be ni eho lɛ mli lɛ hewɔ. Sinsun kɛ kaa he nɔkwɛmɔnii maje dani ekɛha. Wɔfee wɔ diɛŋtsɛ wɔ pull-out test — 38kN ni ji jatsu ni fiteɔ nii yɛ M12 ŋwɛi ŋta ni yɔɔ M30 kɔnkrit mli lɛ nɔ. No hi fe polyester ŋshɔkei ni wɔkɛtsuɔ nii tsutsu yɛ maŋ lɛ mli lɛ. Kɛfata he lɛ, amɛ tech yelikɛbuamɔ lɛ ha mi WhatsApp lɛ hetoo yɛ India be mli ŋmɛji 11 PM.”
“Kulɛ, tsɔne ni akɛwoɔ gbogbo mli lɛ ji piŋmɔ he sane: nibii ni akɛhaa sɛɛ mli, tsɔne ni akɛwoɔ tsɔne mli ni ejaaa, tsɔne lɛ sɛɛ tsɛɔ ni kɛ ehe kpaaa gbee. Samsung jarayeli kuu lɛ kaneɔ tsɔne lɛ he saji diɛŋtsɛ moŋ fe ni amɛaatsɔɔ fãi lɛ ayibɔi. lɛ hiɛ fe be ni ato lɛ.”
Hot FAQs — Sanebimɔi ni Abiɔ Wɔ Daa Otsi
Mɛni ji srɔtofeemɔ ni yɔɔ tsofa ni akɛwoɔ ŋtayaai amli kɛ tsɔne ni akɛwoɔ ŋtayaai amli lɛ ateŋ?
KO: Chemical anchors lɛ kɛ adhesive resin lɛ kpaa gbee — nɔ ko bɛ ni haa shishitoo nibii lɛ yaa hiɛ, no hewɔ lɛ obaanyɛ okɛ ankɔɔ lɛ abɛŋkɛ ŋshɔ lɛ naa kɛ kɔnkrit ni egbɛ eshwa mli. Mekanikal ankɔs damɔ gbeekpamɔ kɛ mlilɛɛmɔ ni baanyɛ aha shishigbɛ fãmɔ aba lɛ nɔ.
Ani tsofai ni akɛwoɔ ŋwɛi ŋtayaai amli lɛ fɛɛ feɔ amɛnii yɛ gbɛ kome nɔ?
KO: Dabi, oya ni ejara waaa shi jeee kɛha shishitoo, polyester. Vinyl ester ji oyaiyeli kɛ hewalɛ teŋ gbeekpamɔ. Epoxy ni he tse lɛ haa tsɔne lɛ mli hewalɛ ni nɔ kwɔ fe fɛɛ kɛ tsofai ni nyɛɔ eshiɔ tsofai lɛ.
Te manyɛ mikɛ jatsu ko awo mli oya tɛŋŋ beni mikɛwo mli lɛ sɛɛ?
KO: Gel be ji minitii 5 kɛyashi 10 ni damɔ bɔ ni hulutsoo be lɛ yɔɔ ha lɛ nɔ. Tsamɔ ni yeɔ emuu baanyɛ afee he fɛɛ he kɛjɛ ŋmɛlɛtswaa kome kɛyashi ŋmɛlɛtswai 48. Kɛha yibɔi pɔtɛɛi lɛ, kwɛmɔ ŋaa wolo ni kɔɔ o-resin lɛ he lɛ.
Te mafee tɛŋŋ matsumɔ bu lɛ mli jogbaŋŋ?
KO: Kɛ dade brɔsh afɔ bu lɛ mli shii 4. Fɔ̃ɔ kɔɔyɔɔ ni mli wa kɛha shii 4. Dust gbeɔ tsakpaa hewalɛ – wɔnyɛŋ wɔwie enɛ he fe nine.
Mɛni ji tsofa-kɛ-ŋma ankɔ katriji kɛ kapsul lɛ shihilɛ be?
KO: Nibii babaoo hiɔ shi nyɔji 12-18 yɛ nibii ni agbeleee ni akɛtoɔ 5°C kɛ 25°C teŋ lɛ mli. Kaaha efee fɛ̃i. Kaashi yɛ he ni hulu lɛ tsoɔ tɛ̃ɛ yɛ lɛ.
Ani ehe miihia ni maná ETA loo CE Wolo kɛha minitsumɔ lɛ?
KO: Bei pii lɛ, ehe bahiaa ni aha ETA he odaseyeli kɛha nibii ni akɛtsuɔ nii yɛ tsũi amli, shikpɔŋhosomɔi ahe hei, kɛ nɔyeli kpaŋmɔi. KADIMƆ: Kwɛmɔ tsumaa he mlai ni yɔɔ he ni oyɔɔ lɛ mli be fɛɛ be dani okɛ ohe awo mli. Wɔbaanyɛ wɔkɛ ETA woji aha kɛji abi.
Ani abaanyɛ ajie tsofa ni akɛwoɔ ŋwɛi ŋtayaai amli lɛ kɛji atsa lɛ sɛɛ?
KO: Dabi. Jeee mlɛo. Kɛji etsa lɛ, bei pii lɛ esa akɛ ajie lɛ kɛtsɔ ŋtayaa ni akɛbɔleɔ ŋtayaa lɛ he loo ni afoɔ lɛ nɔ. Tsɔɔmɔ bɔ ni okɛ ohe baawo mli lɛ jogbaŋŋ.
Mɛni ji ŋwɛi ŋta ni mli kwɔ fe fɛɛ kɛha tsofa-kɛ-ŋma ankɔ?
KO: 20x tso lɛ sɛɛgbɛ lɛ baanyɛ aba mli yɛ susumɔ mli shi husui ni anyɛɔ atsuɔ he nii kɛha nitsumɔi babaoo ji 10x kɛyashi 15x sɛɛgbɛ lɛ lolo.
Mɛni hewɔ Sinsun?
Nitsumɔhe lɛ Jara – Nɔ ni fe afii 15 yɛ nitsumɔ mli – Jara ni Akɛyeɔ Akaŋ
Nɔkwɛmɔ ni hi jogbaŋŋ: Nibii ni akɛtsuɔ nii lɛ amli kwɛmɔ ni agbe naa ISO mlai lɛ anɔyeli ni mli wa.
Nitsumɔ ni Nɔ Kwɔ: 20% fe nitsumɔhe lɛ shishitoo mla lɛ.
Kusum nitsumɔ: OEM/ODM, kusum dalɛ, nɔ ni akɛwoɔ mli kɛ nibii ni akɛwoɔ mli.
Jeŋ Muu Fɛɛ Nibii ni Akɛhaa: Akɛyaa maji ni fa fe 50 mli, akɛhaa ni anyɛɔ akɛ he fɔ̃ɔ nɔ, ŋaalɔi ayelikɛbuamɔ.
Tsɛmɔ Kɛha Nifeemɔ
Ani tsofai ni hi jogbaŋŋ he miihia bo kɛha onitsumɔ lɛ? Na Sinsun Factory kɛha nɔkwɛmɔnii ni aheee nɔ ko, ŋaa gbɛ nɔ yelikɛbuamɔ kɛ jara ni akaa. Wɔ kuu lɛ yɛ biɛ koni eye ebua bo ni ohala tsɔne ni hi fe fɛɛ ni akɛbaatswa ŋshɔ lɛ!
Ani obaasumɔ ni mafolɔ efã ko mli? Teknik mli fitsofitso babaoo? Tsakemɔ gbee lɛ? Gbalamɔ FAQs lɛ mli?
Na Quote Oya
Keep In Touch
TO KNOW MORE ABOUT Sinsun, PLEASE CONTACT US!
We are committed to providing you with the best quality service and look forward to communicating with you to solve problems together and bring you a better experience.
our experts will solve them in no time.
— Nihɔɔmɔ He Nɔkwɛlɔ, Munich Nibii Ahe Nitsumɔhe Kuu (Germany)